Jump to content
SAU Community

Split Front / Dump Pipe

URAS_33

By URAS_33,
in Engines & Forced Induction

 Share

Recommended Posts

skylinecouple Experienced

skylinecouple

Posted
Posted

Regardless of which one you buy would the flange hole be big enough for a slide stage three high flow.The turbine has been opened up pretty much so just wandering if the flange inner diameter would match it.

leetom Proficient

leetom

Posted
Posted
The CES is a top quality design according to their pics on the web site.

Does yours have the o2 sensor mounted upside down?

Apparently its a big no no for o2 sensors as water sits in them when upside down. I can't remember the exact specs but its supposed to be something like no more than 25-30degree's angle from upright.

Any fuel consumption problems? Getting more than 12-13L/100km's?

yeh queried them on o2, assured me there is no problem[as stated have had system 2yrs no probs]. fuel consumption was greatly improved, best 10L per 100 hwy cruising & regulary get 450 to 470 a tank, welds and finish is a1 sounds as ive said before like ripping silk........cheers leetom

siddr20 Grand Master

siddr20

Posted
Posted

^ a friend of mine had a ces split system on his old r33 (200kw tuned).. anyways he never had any problems even with the 02 sensor on the bottom.. his milage was awesome.. 450 to a tank.. maybe more on highways..

He had his car for a year..

anyways to those who say the bos one fitted perferctly do you have a abs unit?

i know for those who dont have it, you can move your air-con pipe around so it wont touch it..

Now with the new design it touches the oil lines..

Im sure over time, its just gonna wear it out (the metal pipe)

Bos if you reading this, please get another design made up.. lol..

Move the wastegate pipe a tad over.. ;)

But quaily of the pipes are excellent!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Getting Dangerously close to being ready to go back in the car. Rockers in with clearance castings now (and a quick check with the USA for the torque settings for the larger custom bolts) Covers and ported FAST Manifold sitting on there. Not fully tightened down as there's some clearancing required for the water pump with the earlier LS1 water pump styles. Example of the clearancing needing to be done: The body has to be ground a little but I'm struggling finding an actual piece of it. The later variant of water pump resolves the issue as the manifold was designed around it. It only came on the VZ LS1 in Australia, it got a different pulley for Gen4 motors. (it also costs $450... vs... $0).
    • eagleaus
      Lower A arm Skyline v35

      By eagleaus · Posted

      https://files.fm/f/5atwkuvcjd
    • eagleaus
      Lower A arm Skyline v35

      By eagleaus · Posted

      Doing some height adjustment on front suspension on a v35 and noticed this. The passenger side looks correct. So wondering what's happened to the drivers side?
    • dbm7
      Got this r31 silhouette flood car to rebuild.

      By dbm7 · Posted

      Oh...I have the electric mirrors as well iirc ...they're in the same state as just about every other R31 door mirrors, with the 3 plastic screw towers broken/cracked in the plastic molding. All the interior is 'dry', so the mirror switches etc likely all work fine. Some pics below of the trimmer pieces ~ looks to me like previous owner, painted chrome finished trims with black paint ...ergo, the chrome underneath is likely a-ok... ...starts to look yukky posting stuff like this, how much did it cost in fuel on your last sortie up this way?...me just thinking aloud, borrow someone else's 4cyl to cut costs, come do your own pick'n'pull like before to save me some bother...hehe.. but whatever, I'll just earmark bits I know you want, because the way this is all panning out, I'll be able to retire the R31 from daily duty at long last, replacing it with a Subaru wagon I'm lining up in the wings...ergo, my attitude towards the donor pinny shell is starting to wane a bit, and I'm more than happy to help you out there... Like you say though, no rush...and I'll guarantee we won't be moving too far from this locale at any rate 😎
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Cool, I’m just down Sydney today. Not much time to get online.
×
×
  • Create New...