Jump to content
SAU Community

Recommended Posts

OK people - ive read heaps of threads that say that this stuff is the best, and I decided to try it out. After about 500kms the box was heaps better and decided to go for a hard run thru the hills for an hour to really test it. Serviced the car a week later and discovered that this oil was spewing out the breather hole and had completley covered the gearbox externally (hopefully not onto my new clutch as well which was put in at the same time).

Does this stuff have a high expansion rate? I used the super-lightweight 75W90 (yellow coloured stuff). Is this too light and just thowing straight off the gears? I filled it up till it came out the plug - about 3.4L.

Seems a bit strange to me. I looked at the box a week later and i can't see any oil on it anymore - seems to have stopped but I think its a bit low on oil now - doesn't shift as well as it did when i first put it in.

Any help is appreciated.

Link to comment
https://www.sau.com.au/forums/topic/15983-redline-gearbox-oil-problems/
Share on other sites

hmmm, i can't see how u could have overfilled it because its meant to be filled until it starts spilling out. the super lightweight may be too light, i have the lightweight in mine (blue), which is recommended. im unaware of the expansion rate, that does seem strange.

Make sure the car is level when u fill it! If your filling it with the front end jacked up, then you're gonna be putting more oil than actually required, cos the oil will tip towards the back of the case. What i find is to try and slowly fill it up, and when u can feel it a bit below the filler whole, remove the jack and let any excess spew out the hole into a oil tray. Messy, but works.. Or just go to a Ultratune or something and get them to do it while its on a car lifter thingo..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
    • @Vee37 How much do you really care about finding these pads again? If your pads are quiet, work well and produce minimal dust, really isn't that enough? If you are set on finding the exact pads again, I suppose I'd do something like this -  Visit your local Jax, find out what brand of pads they carry. If the Jax workshop you previously went to had the pads on the shelf, then you can almost guarantee it will be of said brand.   I'm guessing you don't have the receipt for the previous work and pads. Can you visit a Jax workshop and see if they can look up your previous job to see what pads were fitted?  Still no luck? Put your stalker hat on, find the staff that used to work at the Jax store and ask them. Talk to local workshops, try to find out where the mechanics went to. Talk to Jax workshops, maybe they relocated to another workshop. When it comes to mechanics, its a small world. You'd be surprised how easy it is to track someone down. If these ideas don't work, shit will start getting crazy very quickly.... You could find out every brand and model of pad that fits that car... and try them individually ticking each off the list if it wasn't the one you were looking for.... If you go down this path your going to want to learn how to swap pads yourself, it is very easy, takes minimal tools and space. If you have room to park the car you have room to swap the pads. Plus you have the advantage of making sure all the brake hardware goes back in so they won't squeal! 
    • You miss spelled bearings...
    • Just putting it out there, that's a decent list. You would be better off *not* doing *any* of that and buying someone else's modded car. Like mine. Or anybody else's. Yes it's lotto dependent and all this and that but that 70K (remember, double your guesses) could go elsewhere. Keep it stock, save your money, go lowball @Dose Pipe Sutututu :p
    • Does not mean what you think it means. The continual rising coefficient is the coefficient of friction that continues to rise with increasing temperature. Not "rising during a single stop", except inasmuch as the brakes should get hotter during a single stop. The RR would not be the best choice for a streeter. Yeah....no it's not. JAX would rummage around in the "shit pads we use for all shitboxen that come in here" and install those.
×
×
  • Create New...