Jump to content
SAU Community

Recommended Posts

well as it so happens, i was an AE86 drifter for many a year.

My AE86 had a Toyota Racing Development 2way LSD and about 85 kw at the tyres. The difference being that it was a live axle arrangement. My 86 was very oriented toward going sideways rather than going fast. And therefore a flick of the wrist in 2nd or 3rd gear would result in a drift being initiated. This was more to do with the pinion angle and the rose jointed rear end than the diff.

If you wish to go fast point to point, even in an NA skyline, first spend your money on some 9 or 10 inch wide rims and good tires. I firmly believe a viscous LSD from a turbo skyine will be adequate as your unlikely to overcome the ability of that diff with NA power. But if you can get that 1 way mega cheap, then get that.

Link to comment
Share on other sites

Definitely..

Run decent tyres with VLSD and you can get away without having to run a better diff. Run crap tyres that break loose easily and it will single spin and just not hook up.

Link to comment
Share on other sites

from what i was reading earlier in this post, why would you want to change to a turbo vlsd diff, the diff in my na at least is a vlsd na diff, with the shorter ratio it will accellarate quicker and its still the same viscious lsd set-up.

Link to comment
Share on other sites

If you wish to go fast point to point, even in an NA skyline, first spend your money on some 9 or 10 inch wide rims and good tires.
Definitely..

Run decent tyres with VLSD and you can get away without having to run a better diff. Run crap tyres that break loose easily and it will single spin and just not hook up.

i already have a set of track rims with 255 tyres, and have some semi slicks in the pipeline as my wallet allows me.

thanks for the insight andy - looks like i'll be making some enquires into this diff.

from what i was reading earlier in this post, why would you want to change to a turbo vlsd diff, the diff in my na at least is a vlsd na diff, with the shorter ratio it will accellarate quicker and its still the same viscious lsd set-up.

some na skylines didn't come with an lsd - so swapping to a vlsd using their standard crown and pinion to maintain their short ratio is an upgrade.

Link to comment
Share on other sites

Depends what you mean by Na diff...

An R200 is an R200 all the same strength.

The diff centers, one being the weaker N/A the other being the tough but single spinner VLSD and in the GTR's case Mechanical clutch LSD.

So either way your going to have to spend another couple hundred having a diff specialist (Boss Automotive here in SA) setup the ratio with your LSD, he also shims up the vlsd crap while your there.

I have a 4.363:1 ratio for $100. So it will be a 300-400 exercise to swap ratio's with backlash etc all setup nicely.

Link to comment
Share on other sites

  • 2 weeks later...

hey i own a 1992 r32 type m gts25 and i dont think it has a lsd but anyhow its starting to make clicking noises when taking off gently from first and also in reverse, im wondering how bad this is and if ther is a solution for it, it doesnt help that the idiot at the tire shop put 245's all round from 215-225's, i was thinking of swaping with a gtst diff but now reading this with the ratios maybe i ought to find a na lsd 1.5?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
    • Id like to race in the US i think alot of those track would suit me   For the s15? Youd be stuck between club sprint and the new Open Am wouldnt you depending on how much interior you have left in
×
×
  • Create New...