Jump to content
SAU Community

180sx Sr20de+t

dori34
 Share

Recommended Posts

dori34 Grand Master

dori34

Posted
Posted

For sale: 1990 nissan 180sx

Asking Price: $9,500ono will swap for r32 4door skyline gts N/A + cash adjustment.

Killometer's:96XXXkm at the moment

Manual or Automatic transmission: Manual 5speed - CA18DET gearbox with SR20 bell housing with near new clutch with around 95% meat left (conversion done 5 months ago and driven only for 2months in total by granny driver )

Engine Type: S13 SR20DE + T

Modifications: sr20de na engine from a s13 silvia with a turbo setup bolted on consisting of a 94 model sr20det t25g turbo & standard manifold, sr20det injectors (from 180sx), sr20det fuel pump, standard intercooler & bov & standard turbo back exhaust.

everything is on the car minus the oil lines because that im gona get it properly done (tap into the block etc)

standard ECU is being used and the turbo waste gate actuator has been modified to run lower psi then standard which is 7/8 on the t25g.

safc will be thrown in and i might get it tuned on the dyno

the only thing id recommend you do is get the ECU remapped by DR DRIFT or whoever you want but a remap to get it tuned is a must. you can drive it as is but you wont be able to push it hard or fang it alot.

t piece boost controller

52mm boost gauge

adjustable fuel reg

front & rear strut braces.

tein HE rear coilovers

front lowered springs (might be replaced with coilovers if i can get some)

vertex side skirts & rear bar

clear front bar teardrop indicators

stock front bar

greddy gearknob

vinyl gearboot

interior is immaculate.

HUD dash.

cusco catch can

duck tail drift wing

gp sports style roof spoiler made by Freddy @ TOPSTAGE.

car is in grey primer at the moment

car has been serviced @ 80,000km (new plugs, new fluids and oil)

stock sr20 wheels all around painted in matt black with 70% tread

lcd pager alarm

tints

cd player & speakers (front and rear) with amp.

drift button

theres probably more but i cant think of at the moment

Complianced: Yes

Road Worth Certificate: Yes

Registration: Yes till august 07

Crash History: minor front end accident

Other Comment's about the vehicle: turbo process is still underway but will be finished soon if there are no more delays. car was originally a ca18det but has been changed to a sr20de+t. it has sr20det brakes as well. pretty much all standard parts were used to do the turbo conversion & i might install a 600x300 cooler kit if i have cash left over. if you have any other questions feel free to post here or via pm

Car can be sold as NA for $7800 or swap for NA SKYLINE R32 :P

Contact detail's : reply here or pm me.

Link to comment
https://www.sau.com.au/forums/topic/160170-180sx-sr20det/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Nismo coppermix twinplate clutch

      By joshuaho96 · Posted

      From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • hfygrte52
      R33 GTR tail light

      By hfygrte52 · Posted

      i need a complete tail light for my R33 GTR if you have please let me know.
    • hfygrte52
      Needs

      By hfygrte52 · Posted

      I need a great maintenance workshop around Idaho, if you know one please let me know..
    • hfygrte52
      Need 1993 GTR

      By hfygrte52 · Posted

      Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...