R 32 Gtr Rwd Switch

[black sky]

Hi people

I was just wondering if this is possible and how would i go about doing this. Cause the one in the group buy forum disables both 4wd and ABS but when i take the 4WD fuse out of the engine bay then the abs work's and the 4wd is disengaged.

So would i be able to put a switch onto that fuse??? but also with that when i do want to put it back on to 4 wheel drive (with the switch) do i have to turn the car off and then back on for it to go back to 4 wheel drive????

sorry if this doesn't make much sense but any help would be appreciated

Cheers

anthony

[heller44]

You have it champ.

Putting a switch in with the fuse in the engine bay will do what you want, but if you want 4wd back, you have to put the switch back in and also turn off the car's electrics and back on.

Painful, but you get that if you want abs and 2wd.

I did it that way, but am thinking that I don't really need to have abs when I have 2wd, after the fact..

James.

[Gav]

If you want 2wd for static burnouts (ie at the drags), you are best disabling the ABS also

[black sky]

If you want 2wd for static burnouts (ie at the drags), you are best disabling the ABS also

na it's not just for the drags it's for a little sideway's action as well.

Cheers

anthony

[Beer Baron]

pretty sure even with the engine bay fuse you just need to come to a stop and it will recalibrate and be back in 4wd. pretty easy to check...

[heller44]

Not unless that is just another of the weird wiring problems I'm to be chasing. Have to turn off motor and ignition for mine to recallibrate and pick up 4wd again.