Jump to content
SAU Community

Sa: R31 Gxe With Rb20det

skylineguy19
 Share

Recommended Posts

skylineguy19 Mentor

skylineguy19

Posted
Posted (edited)

R31 GXE 1987

5spd silver top RB20DET

re-mapped ecu

full 3 inch strait through exhaust, fake cat housing.

big wanna be Hybrid FMIC polished custom piping.

series 2 RB25 turbo

walbro 500HP fuel pump

GFB bleed valve/boost controler

6 puk heavy duty clutch

28 spline diff with mini spool

S13 tear drop wheels

k-mac suspension on king springs

hi flow greddy cold air intake pipe.

small boost gauge

sports steering wheel

comments: the ecu was already re-mapped when the engine was bought, it runs quite lean but hasn't ever missed a beat..

it" last run on the dyno at boostworx it made 179RWKW on 9 pound...with micro-tech or possibly power fc it should be good for near 200RWKW according to sean.

the outside of the car is reasonably clean, few small dents and scratches as usual. but nothing major..

it's red over grey with a black bonnet.

inside is much the same.. with a good clean it always comes up fairly neat.

KNOWN PROBLEMS- the gear box has/is developing noise and i have been told that it's on the way out...how ever it stil drives o.k and never slips out of gear, just have to be smooth with changes...

front left wheel sits in a bit from the gaurd, could be control arm or cross member or something down there needs replacing. it is not enginered for the RB20DET but that isn't to hard to do.

off the top of my head that's all i can think of...will edit if i think of anything else.

now then down to business...asking price for whole car is 6500 NEGOITABLE

Cheers.

Pics will be up soon.

Edited by skylineguy19
Link to comment
https://www.sau.com.au/forums/topic/160377-sa-r31-gxe-with-rb20det/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Nismo coppermix twinplate clutch

      By joshuaho96 · Posted

      From the pictures I have when doing the job the flywheel is the same diameter, I don't think they're playing weird tricks like putting weights at the outer diameter to increase flywheel inertia or anything like that. The OEM flywheel is definitely heavier, but it's not a huge difference. Quoted weight savings of the clutch is 2 kg so I can't imagine the flywheel being lighter than ~7 kg. Kind of regret not weighing it before the clutch went into the car but as far as driveability goes I have no complaints.
    • joshuaho96
      R32 update from 1990's spec.

      By joshuaho96 · Posted

      HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • hfygrte52
      R33 GTR tail light

      By hfygrte52 · Posted

      i need a complete tail light for my R33 GTR if you have please let me know.
    • hfygrte52
      Needs

      By hfygrte52 · Posted

      I need a great maintenance workshop around Idaho, if you know one please let me know..
    • hfygrte52
      Need 1993 GTR

      By hfygrte52 · Posted

      Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
×
×
  • Create New...