Jump to content
SAU Community

Recommended Posts

Hi guys,

Quick question, I'm goin to get some Yokohama Advan v103's fitted this weekend, and am currently running 17 x 9 te37's, jsut wondering what would be the best width to go for 245 or 255, and what differences the extra 10 mil will make in handling / ride quality.

Any help will be appreciated.

Cheers,

Dave.

Link to comment
https://www.sau.com.au/forums/topic/160395-tyre-width-question/
Share on other sites

With 245/40R17, your speedo will read 0.65% faster. 627.8mm rolling diameter

With 255/40R17, your speedo will read 0.62% faster. 635.8mm rolling diameter

Stock 205/55R16 is 631.9mm rolling diameter. Bees dick in it

Different rolling diameters cause speedos to be out by a percentage not a static amount

You've got the wider rim, may aswell use it and get the wider rubber if they're the same price. If it was me, I'd get which ever is cheaper though :happy:

Edited by salad
With 245/40R17, your speedo will read 0.65% faster. 627.8mm rolling diameter

With 255/40R17, your speedo will read 0.62% faster. 635.8mm rolling diameter

Stock 205/55R16 is 631.9mm rolling diameter. Bees dick in it

Different rolling diameters cause speedos to be out by a percentage not a static amount

You've got the wider rim, may aswell use it and get the wider rubber if they're the same price. If it was me, I'd get which ever is cheaper though :happy:

i think standard GTR tyre size is 225.

personally I think on a 9inch rim on a GTR go the 245. but there is not much in it. and some brands 245 will have as much tread with as another brands 255. if there is much of a price difference just get the 245. if there is not much difference get the 255.

i think standard GTR tyre size is 225.

personally I think on a 9inch rim on a GTR go the 245. but there is not much in it. and some brands 245 will have as much tread with as another brands 255. if there is much of a price difference just get the 245. if there is not much difference get the 255.

Oh whoops didn't realise that he had a GTR. Anyway, 225/50R16 is 0.5mm smaller than 205/55R16, or 0.08% so all calculations hold

Lucky me :D

Edited by salad

thanks for hte replies guys, but i guess what im trying to ask is what kind of influence on ride / handling will different sized rubber stretched over the rim produce?

for example will wider tyres cause the car to tramline more, or will they provide more grip? what are the advantages/disadvantages of going the wider or the narrower tyre on the rim?

Cheers,

Dave

Get 255's.....they are perfect for a 9" rim. If you use 245's the rim protector bead around the tyre does not stick out past the rim like it's suppose to.

The price difference between the two is minimal because 255's are commonly used now. I went 265 last time and the price jump was HUGE because 265 is not a common size. I will go back to 255 next time because there is buggerall difference for a road car and I can't justify the large price hike for 265's

mmmm, i see most of you guys running 40 profiles. I have 17x9's with 45 profiles all round as i thought this was the norm?

I have power fc and my speedo doesn't seem to be out too much? i do run 235's if that makes a difference and its a gtst!

Edited by mr_rbman

The profile or aspect ratio is a ratio of the tyre width. So a skinnier tyre with a higher aspect ratio can have a similar diameter to a wider tyre with smaller aspect ratio.

Eg. 205/55R16 is almost identical to 225/50R16 in rolling diameter.

225/45R17 is almost identical to 255/40R17

etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey was wondering if you ended up installing the R33 GTR speed sensor - I found one too and wanted to confirm it's a direct swap into the R34 6 speed?
    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
×
×
  • Create New...