Jump to content
SAU Community

Recommended Posts

Should be much cheaper at a wrecker. Not sure if 33's are the same. Would have measure them up or get in the FAST thread in General Discussion and ask someone to look up the part numbers for both R33 and R34. That's how I've confirmed a part being the same before.

Link to comment
https://www.sau.com.au/forums/topic/160481-r34-diff/#findComment-2983554
Share on other sites

  • 1 year later...
S15 diff bolts straight in...did that on an R34 a little while ago

Thanks Dan,

Was flipping back thru past threads and got to pg.42 before seeing your post! Haha

Understand need to use back the R34 half shafts and only concern is the final drive ratio for the S15 being 3.692 as against 4.083 & worried that the pinion and crown on my diff could be worn after 300,000km causing loud 'hummings' even after changing to Cusco semi-syn 80-140 lsd oil.

Link to comment
https://www.sau.com.au/forums/topic/160481-r34-diff/#findComment-3770387
Share on other sites

Hi Dan,

Just check with you - any issues with the S15 diff box in respects of the final drive ratio and the helical lsd components being different with the R34's(viscous lsd) - is there a need to swap ovr the final drive and if there's any effects on the autobox's ecu?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/160481-r34-diff/#findComment-3786416
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...