Jump to content
SAU Community

Recommended Posts

Hey there

I have a Silvia with an rb20det in it

Currently one of my coils - second from the back is overheating/melting

and is NOT sparking either.

---It sounds like a WRX-----

What would be wrong?

We have tried a range of new rb20 coils and checked the spark plug and all are fine :sleep:

any help would be appriciated!

cheers

sammy :)

Link to comment
https://www.sau.com.au/forums/topic/160550-coil-help-my-rb-sounds-like-a-wrx/
Share on other sites

could be a dead CAS, although im not sure if its capable of making only 1 not work.

it could also be your igniter pack (again, im not sure if rb20's have them).

then again, it could be a cracked ring/land. get a compression test.

* she lol

we have bought some coils and tried them,

however is it possible that red top and silver top coils are different???

cause despite the fact that we bought 'rb20' coils - they are not exactly the same as the ones in the car.

Red top and silver top coils are totaly different. Just to give you an example, Red top coils fit onto the CA18DET and vise versa. Silvertop coils only fit the Silvertop.

Try getting the right coils, if thats not the problem, then change the igniter (the square thing ontop of the cover) And take that cover off! it traps heat under it and melts coils.

A dodgy CAS wont make one coil not fire, if its the CAS it wont start at all.

Edited by Rancher
Hey there

I have a Silvia with an rb20det in it

Currently one of my coils - second from the back is overheating/melting

and is NOT sparking either.

---It sounds like a WRX-----

What would be wrong?

We have tried a range of new rb20 coils and checked the spark plug and all are fine :)

any help would be appriciated!

cheers

sammy :(

My car has the same problem at the moment it sounds like a outboard motor.

Ive been told it is a temp sensor fouling the plugs?????????

coils are different from the ignitor pack. its the black box that sits at the rear of the engine above the coils

yeah i know, i swear i read it as coil packs when i was replying :( . must have been in another world.

sorry mate.

  • 5 weeks later...

Hey my car is having the same problem i have a s2 r33 and have put splitfire coils, new plugs in, a new cas and the ecu looked at i am going to try a new ignitor pack if this doesnt fix it is there anything else i can try. Cheers

mine did the same thing (rb25) replaced the ignitor pack and all was good but then few days later fryed another ignitor pack turned out to be a dodgy coil that kept frying my ignitor so i replaced with splitfires and bought a 3rd ignitor and all is well now

Hey my car is having the same problem i have a s2 r33 and have put splitfire coils, new plugs in, a new cas and the ecu looked at i am going to try a new ignitor pack if this doesnt fix it is there anything else i can try. Cheers

if you have a series 2 they dont have a ignitor pack, are you sure you got the right splitfire coil packs? as series 1&2 are different

if you have a series 2 they dont have a ignitor pack, are you sure you got the right splitfire coil packs? as series 1&2 are different

Yea i realised that after i posted it lol. I have only had the car a while and it had them when I got the car and it ran fine and have been told the coils where ok by two diferent shops but i will check agaian anyways thanks.

  • 1 month later...

Hiya,

First of all, redtop coilpacks are different from silvertop ones.

Second of all, I think you should double check the wiring into your ECU. Especially since you've done an engine conversion, it's very likely a wiring issue. Look up the wire for cylinder #6 and double check its the right wire for power to that cylinder.

I had the EXACT same issue with my car (RB20 into an R31) and it turned out that the coilpack wire had been spliced directly into the temp sender. The result was a constant signal to the coilpack which melted it. Not fun and not cheap.

Good luck, let us know how you go.

Edited by R31vhead

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The NZ wiring kit is a 1/3 the price and will be perfectly fine for your application, I've ran one for 6+ years and many others have. Comes as a full plug into factory connector and the settings for a Link. https://www.nzwiring.com/index.php/product/trigger-kit/ Always comes back to the tuners knowledge and experience with a tuning platform. It takes years to become proficient and learning all aspects and capabilities. I've been using Links for 16 years now (rb and sr paltforms) and always learning something new with adding tables, diagnostics and data logging. Stay 98 for the usability and keep it simple so you can enjoy the car more. With experience I'll give you a current example of the industry I am in. They use Motec m190 and only use VE tuning when they have a torque mapping available and would solve the "PARITY" issues that plagues the category all because the muppet doing the tuning doesn't understand the platform or want to learn it and the product seller have no idea on its full capabilities ( I had a good laugh as when firing up an older car that just got completed and they didn't understand the injector scaling or how to change it for different fuel being used)  
    • I'm sure there are specific hygrometers for it. But if you can just throw a high enough ranged temp sensor (theromcouple that came with your DMM, for example) into a pot of it on the BBQ, you can see when it boils.
    • I have multiple bottles in a shed that gets hot, and I'm in SEQ, so it's humid. Maybe we test their theory... Anyone have a system to accurately measure moisture content in oil?
    • Yeah, that and throwing away opened, part used, closed back up bottles has got to be bullshit. Brake fluid sits in not-very-well sealed master cylinder reservoirs for literal years and keeps working (albeit we know we should flush it every couple of years - it actually still works). Anything kept in a bottle in the shed with a tightly capped lid has got to be a million times better than what has been in the car for the same length of time.
    • Wait, they're claiming UNOPENED fluid has a shelf life of only 18 months?
×
×
  • Create New...