Jump to content
SAU Community

Recommended Posts

HEy Guys,

Bit a odd question maybe, I got my mech to change Gear box oil and week ago, now when Im driving the gear stick gets a bit hot, some times I think its bit too hot(May be I didnt realize this before changing the oil), Bit concerned.............(The oil he used is Penzoil)

Is this normal? or some thing wrong with the gear box?

Cheers

Chinthana

Link to comment
https://www.sau.com.au/forums/topic/160917-gear-stick-gets-hot-is-it-normal/
Share on other sites

HEy Guys,

Bit a odd question maybe, I got my mech to change Gear box oil and week ago, now when Im driving the gear stick gets a bit hot, some times I think its bit too hot(May be I didnt realize this before changing the oil), Bit concerned.............(The oil he used is Penzoil)

Is this normal? or some thing wrong with the gear box?

Cheers

Chinthana

erm does the whole gear stick gets hot or just the gear knob?

I had gear oil replaced in auto once. When gear oil is replaced your not ment to drive like bat out of hell for like 1000-2000kms.

Also when I replaced the gear oil, It was getting chewed and resulted in loss of gear oil.

Firstly we put in 4L then I had to add another 2L.

Anyways my point If your gear oil is getting chewed your gear box would heat up and anything connected to it.

If you can check the gear oil level.

my mums EA falcon shifter (auto) gets too hot on the actual steal part that comes up out of the box, and when i say too hot i mean you cant keep your hand on it (well maybe you can if your tough like me :P )

Edited by VB-
When gear oil is replaced your not ment to drive like bat out of hell for like 1000-2000kms.

Rubbish. Gear oil is at its best out of the bottle.

The stick getting hot is normal to a certain extent but common sense should come into play.

Might be worth checking if the gearstick rubber boot is secure. Had a similar problem in my car, lots of heat. Pulled off the shifter surround and none of the screws holding the rubber boot and gaskets were there.

Also depends on what type of gear stick you have?

If you have one off those nasty E-bay quick shifts then it is a solid piece of metal and will get much hotter than normal!. . . . .

No insulation like factory and genuine C's shifter.

Also depends on what type of gear stick you have?

If you have one off those nasty E-bay quick shifts then it is a solid piece of metal and will get much hotter than normal!. . . . .

No insulation like factory and genuine C's shifter.

Thanks Guys. I have a short shifter, not sure what brand though, Will check the oil level soon So looks like this is normal. Anyway its better to check the oil level again.

Let you know

Cheers

Chinthana

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's probably likely that people overestimate their skills in dialling in a setup and noticing the changes. I had SK shocks and springs, and added heavier springs and got them revalved by Sydney Shocks to suit based upon what I told them I wanted the car to handle like. I got back a completely different feeling set of shocks, which probably (?) feel great on track but holy hell are they rough on tram tracks and the like. The shock dyno actually looks pretty similar to Shockworks (from what I can surmise from a screenshot of a youtube video - and my dyno printout...) Truth be told I doubt I'd be any faster or slower with either setup, or camber/castor combination. I also had whiteline eccentric castor bushes up front of my R34. I removed them and put in poly non-adjustable ones to soothe my OCD (nobody ever set the castor the same side to side, and it'd be near impossible to do) and be happy the wheel is centered in the well now for clearance reasons. Yes I wanted it to move 1mm 'back' :p I've effectively set my castor back to stock, negating all the benefits of that which is supposedly massive. I've probably also altered toe and camber in a negative (detrimental) way. I can't tell any difference steering the car.
    • You reckon? I have to disagree. Notwithstanding that at some point we may all be forced to do this to our cars if we want to keep driving them, there is absolutely nothing about an electric-converted-previously-IC-car that is ever good. EVs that are built by OEMs on platforms that were originally IC already suck, let alone the shitty outcomes that result from doing it as a retro to something that was actually built as an IC car. This is because the platform really needs to be designed to house the battery in a useful place (ie, down as low as possible) and the motors are properly located relative to the wheels that they have to drive. Converted platforms already suck at this. But when you try to shove sufficient battery capacity into a previously IC car, you can't put it down on/in the floor, because that space doesn't exist. You can't find enough space where the fuel tank used to be (if it is an inboard fuel tank) and you don't want to hang it out behind the rear axle line if you had a rear fuel tank. And there's not enough space in the tunnel if you still want to use it for anything remotely like what it was originally used for. The engine bay is too big for a motor, and you'd really prefer that the motor for the rear wheels wasn't in the front engine bay anyway. And there's not enough room where the diff was for a proper man-sized E motor. And then.... there is the complete lack of soul and emotion that is provided by EVs. There are some cracking restomods out there. Like the Alfaholics GTA thingo. But it is petrol powered. Look at the alternative EV version of a GTA restomod by Totem. it is jaw droppingly beautiful. But by all reports is is objectively awful to drive, despite having 600 HP or something, simply because there is nothing there. It sounds like a sewing machine or a leaf blower. It should scream and wail and make the hairs on your neck stand up. Oh, and it's 1500 bloody kg in a car that was <900kg when new. GTRs are heavy enough as it is without pushing them up to 2tonnes worth of pork.
    • https://www.dezeen.com/2025/01/06/nissan-electric-r32-skyline-gt-r-godzilla-sports-car/   I reckon this is pretty cool. Lots of other Resto mods have turned to ev power.
    • hahaha @joshuaho96 the most action it gets is when I have to drive from West to SE VIC to meet the fam. Even then, it;s on highway cruising speeds
    • don't know anyone in this thread, but i just found it, read the entire thing in a few hours, realized greg is still posting progress, and just have to say, this is awesome. it looks awesome. 100% right about the Uras kit making it a pain to get on hoists...have the same kit on my 34 and it takes six 2x4s and race ramps to do it without taking parts off. this reminds me exactly of this thread. https://grassrootsmotorsports.com/forum/build-projects-and-project-cars/r63-amg-the-unicorn-of-my-destruction/110824/page8/
×
×
  • Create New...