Jump to content
SAU Community

Different Sii R33 Gtst Steering Wheels And Airbags?

dwholliday
 Share

Recommended Posts

dwholliday Apprentice

dwholliday

Posted
Posted (edited)

I bought an R33 steering wheel from ebay a while ago.

When I received it I was a bit sus as it was a molded plastic rather than leather but other than that it looked exactly the same.

I only fitted it on the weekend. It bolted up ok but when I went to plug in the wires I hit some problems.

Coming out of the top of my 1996 SII R33 gtst steering colum are 2 plugs. One goes into the airbag and the other plugs into the wheel (forget where) but it is a 4 pin plug (with only 3 wires).

The unknown steering wheel has one 5 pin plug as input but then it has a plug for the airbag as well.

So my problem is that the 4 pin plug out of the steering column will not plug into the 5 pin plug on the wheel. I have 2 airbag pugs one from the column and one from the wheel.

I am sure it could be made to work if I had both wiring diagrams.

Does anyone know what this unknown wheel might be from?

Help appreciated

Cheers Darren

Edited by dwholliday
EvilINGT Community Regular

EvilINGT

Posted
Posted

Im sure ive seen nissan patrols (05 model) with a very similar if not exactly the same steering wheel as my SII R33, different colour stitching though. Blame the nissan parts bin maybe :mellow:

cheer

Evil

dwholliday Apprentice

dwholliday

Posted
  • Author
Posted

Does any one have a wiring diagram for a SII r33?

The 4 pin plug coming out of the steering column only has three wires. All I need to do is to find out what these are and plum them into the new wheel.

The airbag plug is coming out of the steering column, so I can use that and ignore the airbag plug from the steering wheel. It wont even be connected.

So the 3 wires that plug into the wheel are??

1) Horn wire ??

2) Earth ??

3) ??

Anyone please

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      HY51 Fuga Hybrid

      By MBS206 · Posted

      find it funny everyone claims different fuel chains, do different things with their fuel blah blah blah. We don't have that many fuel terminals in Australia. The fuel tanker trucks drive into the terminal, fill up, and drive directly to the service station and dump out. The majority of fuel you get, is coming out of the same terminals. The variation is actually at the individual service stations and how good their tanks are, as well as how much turn over they actually have. Older fuel stations, that haven't had their tanks replaced are going to end up with the worst fuel. Also a lot of older stations have shit design, and shit maintenance, and end up with more water absorption into the tank. This is when you then get a bad batch of fuel. Other shit things happen, like tanker drivers have a f**k up, and starting to unload the wrong compartment on their truck into the wrong tank. 
    • r32-25t
      MLR's Bogan cruise ship

      By r32-25t · Posted

      Yeah go with that one 
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      This one?? In other news: I cannot tell the difference between my red MX5 with the silver grey hard top......... and the Ferrari 599XX EVO, they might as well be twins, well.......apart from the big wang hanging off the back of the Ferrari...🤔🤣, without the wing they are identical   
    • r32-25t
      MLR's Bogan cruise ship

      By r32-25t · Posted

      Turn it into the pride flag 
    • GTSBoy
      RB26 Block Filler rigidity/deflection test

      By GTSBoy · Posted

      I think you'll find we're confused about what you were trying to do and how you were doing it. I would have thought that block rigidity was something you measured while loading the block in beam or in torsion, and that you would do so before and after grout filling, to see if putting material in there created a "composite" construction with the expected rigidity increase. Notwithstanding that the true function of grout is less about gross rigidity than local (ie preventing bore deflection/splitting and tying the bores to the main bearing locations a little better, etc etc). It is nearly impossible to follow your description of what you've done without closing ones eyes and making "aliens" hand shapes in front of oneself to try to follow the manipulations you've made. It's still unclear to me what you were trying to prove.
×
×
  • Create New...