Thrust Bearing Carrier On R32 Gtr

[jnr32r]

My bro in laws car is gettin a Nismo supercoppermix clutch, the car already had an ok giken twin plate... how do i know wehter the thrust bearing carrier is the right length?

as i understand the os giken thrust bearing carrier woud be shorther,,,

thanx

Pablo

[STATUS]

sit the clutches next to each other on the floor and measure the diaphram height from the ground, if its the same chances are the carriers will be the same if the new clutch is shorter you need a longer carrier and if it is taller you need a shorter one.

[T04GTR]

im using a nismo tripple. i used one a little shorter. th eos 12mm one is to short.

[jnr32r]

how did u know which one to use?

[STATUS]

im using a nismo tripple. i used one a little shorter. th eos 12mm one is to short.

is it this one? this is the usual twin plate carrier. if you aint got one it is the factory GTi-R part.

[Beer Baron]

you don't have to worry. the nismo clutch comes with bearing and carrier anyway.

[STATUS]

you don't have to worry. the nismo clutch comes with bearing and carrier anyway.

ahh sweet just like ORC and BLITZ... damn OSGIKEN and their tight ass ways.

[Beer Baron]

yeah tell me about it! chasing the right farken carrier when switching from my OS tripple to my OS twin was a bitch.

[1400r]

argh

need to know sr factory cltuch and flywheel combo height to work out what I need to use

with my os super single cltuch sd480