Jump to content
SAU Community

Recommended Posts

just letting you guys know about In Tune Performance. just had the timing belt done (fitted gates performance belt), walbro 550hp fuel pump fitted, all front belts , coolant and fuel filter replaced and safc2 dyno tuned. cost 350 to fit everything (had all the parts) and 160 to dyno the safc. went in with 256rwhp and come out with 271rwhp (could be cause of different dynos). car definately sounds happier(exept for a bit of noise from the new timing belt (was expected)). recommend him for work south of river. located at unit 3/28 salpietro st, bibra lake. ph 94346608,Aaron Gregory. :laugh: p.s. he has no eftpos so cash only :mellow:

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

just letting you guys know about In Tune Performance. just had the timing belt done (fitted gates performance belt), walbro 550hp fuel pump fitted, all front belts , coolant, oil and fuel filter replace and safc2 dyno tuned. cost 350 to fit everything (had all the parts) and 160 to dyno the safc. went in with 256rwhp and come out with 271rwhp (could be cause of different dynos). car definately sounds happier(exept for a bit of noise from the new timing belt (was expected)). recommend him for work south of river. located at unit 3/28 salpietro st, bibra lake. ph 94346608,Aaron Gregory. :D p.s. he has no eftpos so cash only :blush:

hey pal, so what parts did you take yourself exactly ? i want to do the same thing.

he did not fit the safc , only tune .did not change oil. only coolant and fuel filter. i took in a new gates timing belt, fuel pump, alt belt, power steering belt and aircon belt, all from repco, cost about 170 bux for all the belts and ebay fuel pump. hes not keen on pfc's (haltec man) but give him a ring.

  • 2 months later...

ive just had my 32 come back from intune and very happy. aaron looked after me with any problems i had. i got a haltech e-11 installed and tuned x force exhaust, 550 walbro pump, plugs, fuel filter and the map sensors for the ecu done too. i need injectors too but ran out of time with them as i am moving to karratha, so to stop it leaning out the rev limiter has now been set to 5800 rpm untill im back in perth or have the car sent down. but yeah give him a call he is very good

Ive only heard good things about them inc some extreme Race cars and i think they were one of the Shops that did the Training with Wolf over the last 2 weeks.Must be good with Microtech

As their tuning an S6 RX7 Drag car with 20B Quad rotor PP with 3 GT40 ITS Turbos and lots of NOS,Very tough car to tune.

ive just had my 32 come back from intune and very happy. aaron looked after me with any problems i had. i got a haltech e-11 installed and tuned x force exhaust, 550 walbro pump, plugs, fuel filter and the map sensors for the ecu done too. i need injectors too but ran out of time with them as i am moving to karratha, so to stop it leaning out the rev limiter has now been set to 5800 rpm untill im back in perth or have the car sent down. but yeah give him a call he is very good

hey Daniel, wot sort of power did u get out of that setup. looking at the same setup for my 33

At the moment the car is only making 225 rwhp because the injectors are maxed out and i had run out of time to get bigger ones (i moved to karratha)

also because the injectors are maxed out the rev limiter is now set at 5800rpm instead of 8000rpm to stop me blowing up the motor.

And the car is actually n N/A and aaron reckons it should be making around 270 to 280 rwhp with bigger injectors

  • 2 weeks later...

E manage is well under $1000 - and probably your cheapest option. I gives full ecu functionality with alot of extra features, but still utilises factory coldstart, accel enrichement, idle control etc - emanage ultimate comes with laptop software for tuning too.

They are an interceptor type ecu, so nothing too major to wire up.

Considering power fc is getting a bit scarce (new, around 1K - but they stopped manufacturing), emanage would probably be one of the cheapest, best options.

your best bet would be to do a search in the performance section, or post up there if you cant find what you are looking for - at least that way you wont be accused of whoring other peoples threads :thumbsup:

E manage is well under $1000 - and probably your cheapest option. I gives full ecu functionality with alot of extra features, but still utilises factory coldstart, accel enrichement, idle control etc - emanage ultimate comes with laptop software for tuning too.

They are an interceptor type ecu, so nothing too major to wire up.

Considering power fc is getting a bit scarce (new, around 1K - but they stopped manufacturing), emanage would probably be one of the cheapest, best options.

your best bet would be to do a search in the performance section, or post up there if you cant find what you are looking for - at least that way you wont be accused of whoring other peoples threads :D

the safc2 is only a piggy back to the ECU. to replace the stock ECU you will need to go to a power fc, haltec, e-manage, EMS. these will cost from 1500 up to buy, and 500 up to fit and tune.

yeh, what steve said

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
×
×
  • Create New...