Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 weeks later...

hey guys was browsing forum found this thread, i recently took my car to aaron as a stocker only had pod filter and 3inch stainless turbo back zorst that i did myself already, for me he fitted apexi turbo timer, safc, fuel pump, piller mount and greddy boost gauge, GFB mach boost controller, FMIC, fuel filter, and dyno tuned my car run a tune into safc, done all this for $939 car come out at 286.9 rwhp at 12psi with faulty coilpacks, was very surprised at his knowldge recommend Aaron as he did a great job on my car and he is very straight foward :).

hope this helps guys,

Adam

Hmm, I thought I would give them a go, cos Lumpy isnt tuning any more, and so many people on here have had such great results

I paid nearly $1000 for intune to fit cams (that I provided) in an SR and give me a tune (power fc),

end result:

lacked power (less power after fitting cams than with stockys), rich as hell, hunted like a pig and stalled alot cold, flat spots (and not to mention he fried my battery isolation switch)

I was very sad.

took car to another dyno, figures were over 20hp down from what in tune's dyno showed, got it retuned (not at intune) I got more power, no flat spots, no hunting and stalling, no pumping soot all over my garage in the morning - and it cost me ALOT less than what I paid at intune initially

Personally I dont want to see they guy again, hear or speak to him. I feel a bit screwed after my experience there - if you know what I mean.

Just chalking it up to a very expensive lesson learnt.

who did the fix it up for you steve?

i had issue with my 1st tune, and have since took the car to all-star and been very happy with the results :huh: maybe give them a go. if ur interested i can shot u a pm

  • 1 month later...
I paid nearly $1000 for intune to fit cams (that I provided) in an SR and give me a tune (power fc),

end result:

lacked power (less power after fitting cams than with stockys), rich as hell, hunted like a pig and stalled alot cold, flat spots (and not to mention he fried my battery isolation switch)

I was very sad.

took car to another dyno, figures were over 20hp down from what in tune's dyno showed, got it retuned (not at intune) I got more power, no flat spots, no hunting and stalling, no pumping soot all over my garage in the morning - and it cost me ALOT less than what I paid at intune initially

If you have an issue with any tune/work done you should go back to the guy first. I understand why your pissed but at least talk to the shop and see if they will fix it for you ($0). If that doesnt work go somewhere else THEN bag the shop.

You really should ask first

I discussed the state of the tune, I paid extra for him to try and sort it (Yes, I f**kING PAID)

But thank you for your wonderful advice

I posted up here so that others reading this thread would realise that not all things are roses and goodness - and wont end up wasting big $$$ for f**k all

But you please feel free to use them.

  • 4 weeks later...
You really should ask first

I discussed the state of the tune, I paid extra for him to try and sort it (Yes, I f**kING PAID)

But thank you for your wonderful advice

I posted up here so that others reading this thread would realise that not all things are roses and goodness - and wont end up wasting big $$$ for f**k all

But you please feel free to use them.

No worries buddy the advise is free. Ive heard some mixed result from Aaron some love him others dont. I wont be using his services any time soon.

Edited by SSidewayz

it's always the way... you'll likely hear good and bad of everyone.

there is one particular workshop i will NEVER touch again, but then others rave about it.

i do all my own mechanical work, but as yet, dont know who id get my car tuned by...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Right, its been a while for updating this car, but I made some small but important progress today. In the end I bought an Ecutek dongle from the Australian distributor Tunehouse (for local hardware support) but have gone with a remote tune from Racebox in the US (because they have done millions of these, and I could not find any tuner where I could access the tune anyway as they are all password locked). The App is reasonably easy to work with, but the PC software reminds me of Haltech's ECU Manager that you need to use with the Plat Pro ECUs, it is a nightmare.  Anyway, I sent the details over, got back a tune file and a request for data logs. I finally got a chance to access a private test track today as they want redline logs in 3rd and 4th, and have sent them back for the first round of reviews. The main difference in the tune is going from 1.0 (stock) to 1.3 bar (19psi), although I'm sure is a lot of other stuff in the background. Keeping in mind this is a dead stock car with 125,000klm, this is what the App's performance test claimed: Before After Interesting to note that both 400m tests had the same terminal speed (158klm/h) but different ETs. And no, the speed limiter seems to be higher than that at 186kl/h. Summary of the key logged parameters for the 3rd and 4th gear runs were: Those little turbos were certainly whizzing at 200,000rpm+.  Also I'm really not that excited about oil pressure 55psi at redline so I think I'll go thicker than 5w30 (nissan recommend 0w20....) and see if that improves it. Other than that (and the big boost spike....) everything looks good as a start to me.
    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
×
×
  • Create New...