Jump to content
SAU Community

Recommended Posts

yeah it's a fair bit of stuffing around (too me around 12 hours all up believe it or not - planning, pulling the car apart, metal fabrication, fitting, soldering/wiring, carbon covering, put the car back together), but well worth it in the end. Not bad for a first attempt I reckon.

Looks like this weekend is the mod-a-thon for my R34 if anyone want to come over and help/play/watch .... GT2530 turbo install, new radiator, new oil cooler, new trans cooler, new thermo fan and other bits and pieces.

WOW Andrew, Getting a few nice goodies installed there over the weekend! Will be interesting to see how she goes after that 2530 bolts on! I would come and help "watch" and "help" BUT im a little unsure what you mean by "play" tho....... :) and i'm at the track all weekend! Sorry!

no worries Darren .... yeah I am not after anything too spectacular - will be happy with around 230-240rwkw if all goes to plan. I won't have a PowerFC running it (since it is an auto) which is a bit of a shame, but we will see what the SAFCII can do.

Has anyone fitted a fuel pump and fuel reg. before? I haven't, but am gonna give it a shot. If I remember correctly when I played with my S15's 040, the pump still had tons of fuel pressure in it even when the battery was disconnected. I am not sure how to get around this.

lol Nick - so you work at a car retailer, yet are useless mechanically? Nice one! :)

Awesome Andrew, that sounds great! Where'd you pick up the new turbs from if you don't mind me asking. She should definately have a bit more pull once you're finished this weekend. Take it you aren't going on the BSM cruise then? Pity, would have loved to seen her in action :)

lol Nick - so you work at a car retailer, yet are useless mechanically? Nice one! biggrin.gif

i work behind a desk doing paperwork all day,

If you need an extra pair of hands and have patience let me know :)

Luke, it's my brother-in-laws ex-turbo. His R33 kind of died (see attached pics - stationary at the lights and some noob hit him from behind at 60km/h and pushed him into the car in front even though he as hard on the brankes) about a month back. He bought it second hand, but it has no shaft play and he was running 240rwkw with a conservative tune and relatively low boost.

Yeah it's going to suck to miss the cruise, but I have been wanting to get this gear on my car for ages and this weekend seems like my only free time. There will always be another cruise.

fyi David has just bought a Silver 1997 S3 R33GTR from Melbourne - damn it is a sweet car!!!

DavidsR33smashedfront.jpg

DavidsR33smashedfront2.jpg

DavidsR33smashedfrontside.jpg

DavidsR33smashedfronttop.jpg

DavidsR33smashedrear.jpg

DavidsR33smashedrear2.jpg

DavidsR33smashedrearside.jpg

DavidsR33smashscenerear3-1.jpg

DavidsR33smashscenerear2-1.jpg

DavidsR33smashscenerear.jpg

DavidsR33smashscene.jpg

DavidsR33smashscenerear3.jpg

DavidsR33smashscenerear2.jpg

DavidsR33smashAstra.jpg

DavidsR33smashscene4.jpg

haha was just stirring you Nick :) .... but feel free to come over if you have nothing better to do.

I have lots of little fiddly jobs to do too like the oil breather tank/kit, and the radiator breather/air remover kit to fit too. Not hard jobs, but time consuming and fiddly.

Has anyone fitted a fuel pump and fuel reg. before? I haven't, but am gonna give it a shot. If I remember correctly when I played with my S15's 040, the pump still had tons of fuel pressure in it even when the battery was disconnected. I am not sure how to get around this.

Yeah I have. You unplug the electrics to the pump and then crank the car over with your key, de-pressurises the system. Then disconnect the return fuel line I think, and let it drain back into the tank. Pumps easy hope you have a fairly empty tank tho!

FPR is even easier if its a non-adjustable one, easy as pie!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's a difference between "selling" a product to someone (which, if you walked into a workshop or bricks and mortar store and bought and walked out with it, is just the act of buying and selling) and rolling your buggy into a workshop and having them fit non-roadworthy stuff to the car. And for the latter, let's ignore any potential legal loophole arguments that the armchair lawyer might want to make to differentiate between supplying your own parts to be fit by the workshop or getting the shop to supply and fit. The workshops that have been dealt with in the US for this are in the latter category. It would be near impossible to try to charge/attack/criminalise a shop for selling "for off road use only" parts to someone unless those things were intrinsically illegal in their own right, or had other legislation wrapped around them, such as there is for guns, pharmaceuticals, etc. Well, no. And you knew your argument was silly when you made it. And there is. it might be somewhat harder in Vic, but then that's the price you pay for electing the long list of (unts that you have to run the whole shit hole**. But otherwise, you can put an aftermarket or otherwise tunable ECU into a car and get it run through the whole shebang of emissions testing as part of an engineering cert and, so long as the tune is "locked" afterwards, then that modification is on the list that is approved on the cert. But....it is an expensive process. ** Of course, the (unts who make up a large proportion of the population that eternally try to get around the rules are also a part of the problem and the reason that you end up with draconian rules in the first place. By contrast, SA was founded and the government and civil service set up and run by very sensible types (largely German) who set up good structures that enabled a lighter touch of government on the somewhat better behaved population. it is only more recently that we have followed the rest of Australia down the criminal drainhole of penal colony behaviour and now we have to catch up with mobile phone cameras and so on.  
    • Not specifically the revamp Toyos. In the past I've used Nitto NT01s, which were essentially the same compound as R888 with a different pattern (that's what the internetz said, so just be facts). I did like the NT01, progressive fade, didn't go from grip to 0 grip in a split second. If you look at the serious street/track guys, most are either on Cup 2, A052, A050, AD09, CR-S or AR-1.  
    • I have one of these! It is absolutely useless. It provides not nearly enough force on the bolt, it just slips over anything that is not finger tight. And if it's finger tight, you can use your fingers.
    • You have to take photos of the car in Victoria with a timestamp. So if you have big aftermarket turbo in your engine bay, your car is simply not getting a RWC and you'll be doing a lot of returning to stock, and re-modding after about 90 days (because cars that have had a RWC can be audited after the fact). The law I'm kinda ambivalent about. I can see the logic and the writing on the wall, Cobb etc would be well known for selling to 'wink wink off the street usage' but in the real world everyone knows what they do and where they end up. It'd be like someone selling guns in Australia but "only to people who have a proper licence" but selling them outside of Bunnings instead of sausages to anybody. Like RWC's, and VASS's and EPA, this is enforcement of the actual existing rules. I haven't looked into it but there (should) be a way for people to legally pass their tuned car to be within the rules if they can prove they pass emissions laws that are applicable. If there's not then that's another story.
    • Interesting post(haven't watched the vid). I'm surprised companies can be fined for selling products that are specifically meant for certain applications.  How can you force a customer to use or apply your products in 100% the way intended? People have been misusing products since they were invented. Heck, I ate dessert last night with a soup spoon. Does that mean the spoon manufacturer could be fined? And what of the customers who actually want to use the product for its intended use?   I'm sure we could discuss and debate this for a while, but this is an introduction thread and I dont mean to take over it.
×
×
  • Create New...