Jump to content
SAU Community

Recommended Posts

Im getting a R33 gts-t with just an N1 exhaust and Apexi Super AFC. How much boost can i safely run without an Intercooler and how much once i get an intercooler? And approx. how much power should i expect?

Thanks

Edited by BillyMako
Link to comment
https://www.sau.com.au/forums/topic/161405-r33-gts-t-safe-boost/
Share on other sites

10-12psi mate, same as everyone else :bunny:

Depends what you hit Rich & Retard every car is different... you'll know when you do :D

Power without an ECU, around 160-180rwkw. Could be a bit less. Either way around that.

Checkout the RB25 dyno thread sticky, it pretty much gives you expectations to work from

yeah 12psi or so, i have 4 settings on my boost controller, 7,9, 12 and 14.9 psi. YEEEEPPP 14.9 psi. BUT i only use this when i want to absolutly cane it for a short burst, plus i ensure i monitor teh bosst with my foot.

I don't expect the turbo to last tooo long, but i am only using 14.9 psi for 10 second burts or so.

  • 2 weeks later...
so 11-12psi on stock turbo is fine?

Generally speaking yes this is fine. But for people to say yeah it wont be a problem isnt entirely right. Some peoples turbo have let go at less then this its really luck of the draw. The cars arent new these days so your pushing factory items alot harder then they were intended to. At the end of the day 11 - 12 is generally safe enough but its not to say when you put it on 11 or 12 that it wont shit itself in the first week.

Just a thought.

Im getting a R33 gts-t with just an N1 exhaust and Apexi Super AFC. How much boost can i safely run without an Intercooler and how much once i get an intercooler? And approx. how much power should i expect?

Thanks

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

He is refering to how much he can run without a better Intercooler. They all have factory intercoolers just arent particularly efficient at much more then standard boost, power.

wats 11-12 psi on guage reading... is that 0.7?

You will want to get yourself a guage reading in psi otherwise if you are intent on trying to run 12psi you will quite possibly run more without realising. A cheap mechanical guage will be all you need. Id keep it to 10psi myself but either way :)

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

yes it does, a very small side mount intercooler. if i were you, go for the r34 smic, they are slightly bigger and will be sufficient for 200rwkws

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yep, the plan is to do some work in Japan, as I mentioned above possibly keeping it there longer than November 2025. Frankly, I'm not dealing with TopRank ever again and, because my car is no longer with them, I could work with BBL/GY directly👍 But alas, I'm not looking at major bodywork just yet.
    • Yeah I had the probes on the battery terminals.  Sounds good. What reading should I expect to see in a car that runs well? 
    • I went for the scissor lift option, gives a 3ft lift at full lift. I wanted a 2 post but my concrete wasn't deep enough to secure it properly
    • Depending on exactly where that voltage is being measured, that is most likely the battery is f**ked. If the multimeter probes are on the battery's own terminals, then it is f**ked. If they are on the car's terminals, then there is a bad connection. Either are fatal to the attempt to start it. Literally just put it on the 20VDC range, put one probe on the battery's -ve terminal (ideally not the car's terminal) and the other on the block somewhere exposed/metal, like an engine mount bolt head. You can also test the earth lead is steps, so from battery to body earth, body earth to engine connection point, engine connection point to some other spot on the engine, to see if you can isolate where a shit connection actually is.
    • I meant to write 50 originally and then double checked the price and found it was ¥12m (125k) and came to edit it and realized I had accidentally added and extra 0 in the first place lol 
×
×
  • Create New...