Jump to content
SAU Community

Recommended Posts

Im getting a R33 gts-t with just an N1 exhaust and Apexi Super AFC. How much boost can i safely run without an Intercooler and how much once i get an intercooler? And approx. how much power should i expect?

Thanks

Edited by BillyMako
Link to comment
https://www.sau.com.au/forums/topic/161405-r33-gts-t-safe-boost/
Share on other sites

10-12psi mate, same as everyone else :bunny:

Depends what you hit Rich & Retard every car is different... you'll know when you do :D

Power without an ECU, around 160-180rwkw. Could be a bit less. Either way around that.

Checkout the RB25 dyno thread sticky, it pretty much gives you expectations to work from

yeah 12psi or so, i have 4 settings on my boost controller, 7,9, 12 and 14.9 psi. YEEEEPPP 14.9 psi. BUT i only use this when i want to absolutly cane it for a short burst, plus i ensure i monitor teh bosst with my foot.

I don't expect the turbo to last tooo long, but i am only using 14.9 psi for 10 second burts or so.

  • 2 weeks later...
so 11-12psi on stock turbo is fine?

Generally speaking yes this is fine. But for people to say yeah it wont be a problem isnt entirely right. Some peoples turbo have let go at less then this its really luck of the draw. The cars arent new these days so your pushing factory items alot harder then they were intended to. At the end of the day 11 - 12 is generally safe enough but its not to say when you put it on 11 or 12 that it wont shit itself in the first week.

Just a thought.

Im getting a R33 gts-t with just an N1 exhaust and Apexi Super AFC. How much boost can i safely run without an Intercooler and how much once i get an intercooler? And approx. how much power should i expect?

Thanks

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

He is refering to how much he can run without a better Intercooler. They all have factory intercoolers just arent particularly efficient at much more then standard boost, power.

wats 11-12 psi on guage reading... is that 0.7?

You will want to get yourself a guage reading in psi otherwise if you are intent on trying to run 12psi you will quite possibly run more without realising. A cheap mechanical guage will be all you need. Id keep it to 10psi myself but either way :)

Doesn't the R33 Turbo have a small stock intercooler? Or are you referring to an after market intercooler?

yes it does, a very small side mount intercooler. if i were you, go for the r34 smic, they are slightly bigger and will be sufficient for 200rwkws

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just one more post to show the final result and the original "janky" solution for a laugh. Everything feels really tight and no wobbling at all, very pleased 🙂
    • After drying a few days, time to put her back together 
    • The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
×
×
  • Create New...