SECURITY Posted December 2, 2008 Share Posted December 2, 2008 So you're still keeping the airflow output map on greddy sensor when doing all this right? and doing all the clamping there and not even using the boost limiter map? no the airflow output map was still throttle position vs rpm. i was using the boost limiter map but for some reason it wasnt working. Hmm not had this issue, i would try juggling the afm voltage in the output map to mid way between the two, bit on the rich side at idle say 12.5-13 instead of 14 ish and see if you can get enough cold start in there. without playing with it here it is a bit hard sorry. ok i'll try putting the idle voltage somewhere around 1.35v and +20 to -20 which will give me 40% to play with. i should have thought of that sooner. thanks Trent, i'll let you know how i go. Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4295797 Share on other sites More sharing options...
pear Posted December 2, 2008 Share Posted December 2, 2008 Hi Guys, I'm trying to track down a guy from Perth - has an R34 GTT with EMU installed. On the emanage forum, his name was Snaggs. anyone know if he's on SAU? Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4297077 Share on other sites More sharing options...
Haines Posted December 3, 2008 Share Posted December 3, 2008 http://www.skylinesaustralia.com/forums/ma...tml&st=620# this is him i believe Chris Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4297411 Share on other sites More sharing options...
pear Posted December 3, 2008 Share Posted December 3, 2008 http://www.skylinesaustralia.com/forums/ma...tml&st=620#this is him i believe Chris cheers mate!! Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4298652 Share on other sites More sharing options...
antomx Posted December 4, 2008 Share Posted December 4, 2008 (edited) no the airflow output map was still throttle position vs rpm.i was using the boost limiter map but for some reason it wasnt working. What are you using to to tune the injector and/or ignition maps after the clamp? Greddy pressure or still throttle postion vs. RPM? I'm sorry maybe you've posted this info already..... i have read this whole thread (took a week) but I dont remember if you have or not. Edited December 4, 2008 by antomx Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4299770 Share on other sites More sharing options...
STATUS Posted December 4, 2008 Author Share Posted December 4, 2008 What are you using to to tune the injector and/or ignition maps after the clamp? Greddy pressure or still throttle postion vs. RPM?I'm sorry maybe you've posted this info already..... i have read this whole thread (took a week) but I dont remember if you have or not. best to use pressure sensor. better resolution... gm sensor works fine to and cheaper. Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4299962 Share on other sites More sharing options...
SECURITY Posted December 4, 2008 Share Posted December 4, 2008 What are you using to to tune the injector and/or ignition maps after the clamp? Greddy pressure or still throttle postion vs. RPM?I'm sorry maybe you've posted this info already..... i have read this whole thread (took a week) but I dont remember if you have or not. yeah mate im using the pressure sensor for everything else. its just cleaner to make the car run on the MAP sensor if you log the AFM voltages vs. throttle position. Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4300534 Share on other sites More sharing options...
Paulpen Posted December 12, 2008 Share Posted December 12, 2008 Sorry for a very basic question I think but I dont really know much about mapping and am looking at E-Manage Ultimate as an option. My S1 RB25DET had been converted to a wasted spark setup like this Same kit and I was wondering if this affects the ability to wire it in etc ? Many thanks Paul Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4315267 Share on other sites More sharing options...
STATUS Posted December 23, 2008 Author Share Posted December 23, 2008 Sorry for a very basic question I think but I dont really know much about mapping and am looking at E-Manage Ultimate as an option.My S1 RB25DET had been converted to a wasted spark setup like this Same kit and I was wondering if this affects the ability to wire it in etc ? Many thanks Paul no stress, but yeah you need to follow the wasted spark diagram in the installation book Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4332636 Share on other sites More sharing options...
DFAULT Posted February 17, 2009 Share Posted February 17, 2009 I was just wondering if someone would be kindly enough to send me there map for: rb25det s1 "emanage blue" Stock Turbo Stock Injectors FMIC POD FULL Exhaust looking to run about 13-14psi i've just purchased a Blue emanage and have full access to a dyno Though i will be looking to take it to trent afterwards for some fine tuning I have the cable for the Emanage blue but having trouble tracking down the software for it hopefully someone can be nice enough to send me the software also danoneu@hotmail.com Cheers Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4431548 Share on other sites More sharing options...
NoFX_Hardcore Posted February 21, 2009 Share Posted February 21, 2009 +1 for software (for ultimate) if anybody is willing to send it... Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4437781 Share on other sites More sharing options...
Turbo Dave Posted April 2, 2009 Share Posted April 2, 2009 This is the injector map of my EMU. I dont know a thing about what these numbers mean really but my car is stareting to run like SH!T! Getting alot of soot on the back now and cant run full boost without pinging. Full is 15psi low is 10.5 runs on low boost but stinks of fuel when ever I pullup. Does this map look normal? Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4514835 Share on other sites More sharing options...
Kwyjibo Posted April 3, 2009 Share Posted April 3, 2009 Hi, Just two quick questions about these ECU's. Is there anyway to reset them to a 'stock' map(i.e makes no alterations to signals). Also will I be able to put in bigger injectors and Z32 AFM and make some quick adjustments myself so I can drive it to the tuner? It looks as simple as selecting the correct AFM, and then setting the old injector size, new injector size and timing. Is this correct and will I be able to drive on this safely or is there more too it? Cheers, Adrian Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4517116 Share on other sites More sharing options...
Haines Posted April 4, 2009 Share Posted April 4, 2009 no you should be able to set those two things (assuming you have set it for the right car ) and drive to your tuner i drove around for ages before taking it to the tuner although I had a wideband and was able to tune the non load points so it wasnt rich as just dont boost it hard and you should be fine Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4517474 Share on other sites More sharing options...
Axelson Posted May 2, 2009 Share Posted May 2, 2009 Hi all. im kinda rooke in this area but have some quiestions that u guys might be able to answer. i have my emu hooked up with the plug in loom. car starts fine but it gets way to much fuel, the sparkplugs are very black, thou not wet. I have set the correct parameters of the injectors as seen on the printscreens in the beginning of this thread. there seems to be some sort of problem cause if i set it at say 370cc and lagtime @ 0.71 at before and then changes to 850cc with a lagtime of 0.85 the car starts goes up a little in rev and then dies. When setting both before and after to the same so it says 850 on both and same lagtime tha car runs better but still get isnae much fuel. does make any difference if i put in 370cc onboth places either. When taking the rev up to ~2000 rpms and letting of the gas the car stays on 2000 for a little moment and then goes down. very unresposive and runs poorly. Any Ideas on what i can have done wrong? Greatful for answers! The car has those specs. R33 gts-t Topmount exhaust manifold. Garret gt32 turbo Greddystyle intake manifold. Fmic 3" from turbo Sard 850cc sidefeed injectors sard progressive FPR with clock Hks mushroom filter Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4570129 Share on other sites More sharing options...
STATUS Posted May 3, 2009 Author Share Posted May 3, 2009 This is the injector map of my EMU.I dont know a thing about what these numbers mean really but my car is stareting to run like SH!T! Getting alot of soot on the back now and cant run full boost without pinging. Full is 15psi low is 10.5 runs on low boost but stinks of fuel when ever I pullup. Does this map look normal? Dave i still have not recieved your map, still happy to have a look over it. info@statustuning.com Cheers Trent Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4570546 Share on other sites More sharing options...
Axelson Posted May 4, 2009 Share Posted May 4, 2009 Is there any reason or workaround for me not being able to get the car running more than 2 seconds when i put 370cc on "before" and 850 on "after" parameters in I/J settings? If i set them to the same numbers in both before and after column it starts and runs decent. Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4574055 Share on other sites More sharing options...
STATUS Posted May 5, 2009 Author Share Posted May 5, 2009 (edited) Is there any reason or workaround for me not being able to get the car running more than 2 seconds when i put 370cc on "before" and 850 on "after" parameters in I/J settings?If i set them to the same numbers in both before and after column it starts and runs decent. best bet is to forget the numbers and concentrate on the results ie actual lambda. move the injector setting to say 650 then play with the lag times (0.5 - 0.9). Some injectors require thinking way outside the norm and the only way to set it up is by trial and error... bit of a bummer. Edited May 5, 2009 by URAS Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4575597 Share on other sites More sharing options...
dori34 Posted June 20, 2009 Share Posted June 20, 2009 hey trent, the check engine light came on today on my R34 neo. i got the tuner to install the unit + the neo ignition chip as well. any reason why this would by happening? car isn't miss firing or anything and is still running as normal. Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4668292 Share on other sites More sharing options...
STATUS Posted June 20, 2009 Author Share Posted June 20, 2009 @ what boost? the boost sensor can max out and cause a cel light. Link to comment https://www.sau.com.au/forums/topic/161460-e-manage-ultimate-emu-56k-beware-screen-shots/page/33/#findComment-4668306 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now