Jump to content
SAU Community

Power / Weight Ratio (p Plater Restrictions)


Recommended Posts

Hey all, just to clarify this matter for use all... I happend 2 get pulled over not even an hour ago in my R33 by a TMU officer, M. MOOHAN a senior constable from Fawkner. Anyways... he said 2 me that out of the factory my car is illegal due to power to weight ratios... $112 fine and not allowed to drive until fully licenced. Stock out of factory i said?.. hmm.. doesn't my car weigh 1500kgs and have 187kw... do the math and that = 124kw per tonne!.. UNDER THE 125kw limit. Yet my rego specifies that it only weighs 1400.. hmm. dunno wtf is with that? Out of factory you might say.. which means no petrol no water no oil and overall less weight etc etc.. but i'll be damned if u can drive any car out of the factory without petrol, oil and water. So I am absoloutely pisst off as to why my car is weighed in by Vic Roads at 1400 and to why i got that fine and can't drive my car until August (when im fully licenced). On top of all this i asked him why and his like don't give me the figures i don't know, all i know is that by the "book / law the rb25det is illegal to drive on your P's, you can put slabs of concrete in the back of your car its not going to make any difference." And i also quote "i'm lucky that their not allowed to give out demerit points for this fine as yet as it's not in the book" or something along those lines.. but yeh.. just for all you peoples info.. im soo depressed right now.. honeslty.. people out there killing each other.. we have no water here in melbourne households yet factories use a million litres a day.. and cops are worried about a bit of power over weight ratio.. omfg wat has this world come to... moses and jesus would be rolling in their graves! (not that jesus was buried but yeh)

Peace out love use all .. mwa!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • Thanks to @V35_Paul there is an oem stereo available on gumtree, but the fascia is slightly different. It has a flip up screen as opposed to my pop up screen. Am I able to disconnect the radio/cd player from the fascia to use it on mine?    
    • Had to google what a quart is lol.. so rough as guts a litre. That's a bit excessive, also what oil weight are you running? The whole steam cleaning idea isn't too far fetched either. Maybe as you suggested, turn off the WMI (assuming your Kebabtech pulls timing, boost, etc.) and run it for a bit and see if there are any noticeable changes in spark plug colouring.
    • Pretty simple question. I was about to put the transmission back in and thought I pretty much had it lined up when I noticed it seems like the pressure plate isn't flat. I was pretty careful when undoing the bolts both during initial disassembly for cleaning and when torquing them up for installation so this is pretty discouraging. I'm not sure if I accidentally bumped the pressure plate with the input shaft and bent it somehow or if it just showed up this way. Is it possible that there's just something obvious I'm not doing correctly? I'm pretty sure I was extremely careful to make sure the friction discs were seated correctly in the hub, everything lined up, flywheel torqued according to sequence, the little springs all sitting correctly in their seats, etc.  What's the play here? Do I jump straight to a new pressure plate?
    • OK. I can see that being the case. But if you live in the land of "only switching between 4.08, 4.11, 4.36" like most Skyliners, then you never encounter it. Now I perhaps understand why the crownwheel is thicker on some of the smaller numerical ratio diffs. The two stubs being the same (unequal) lengths and just swapped side to side between the different cases is a new one to me. I'm hating Nissan R200s more than ever now.
    • Reason I say this is I have seen broken ones, in drift, drag and even behind a stock Z. I do appreciate most of the time its the synchro's that go.   Trouble with quoting HP is it doesn't really say how strong the box is.  I've not seen many CD00X box's make it past a mid 9(150mph) I have seen about a stock R33 RB25 box's run a 9 too, they all go boom at some point though.   Another clue is they make gearsets for CD00X box's too, wouldn't be a market if they didn't break or have a limit people are going past.   I totally agree it is a strong box, just have to weigh up the true total cost of the conversion vs rebuilding with a good gearset. 
×
×
  • Create New...