Jump to content
SAU Community

Recommended Posts

Hi guys, during the course of the last number of years I have spent obscene amounts of money on my cars and through my last 5 imports I have managed to accumulate a huge stack of performance and tuning parts and OEM gear that I must clear as its simply taking up way to much space at home, and will not fit in my apartment :)

Right at the moment im also focusing more time and money on my GTR so the HKS turbo kit, Oil Cooler and other Jap goodies are up for grabs. I don't like to cut corners, so these items are all in excellent condition.

All parts located on the Northern Beaches in Sydney - First in, best dressed.

More parts will be added as I find them

NO TIMEWASTERS!!!

Genuine Nismo Key Blank - RN010

Extremely rare item - No longer manufactured by Nismo

Suitable for:

- R34

- S15

- C35

- A33

- Y33

This cost me a mint to buy however I havent ended up using it, so its for sale

$170.00 - SOLD!

post-46-1174640947.jpg post-46-1174556179.jpg

FET Direct Ignition System Coil Packs (001 Model)

Drop in replacement high performance coil packs - red in colour

FET coil packs are the same as your typical Splitfire coils and use the same model designation

These are suitable for early RB26 (R32/R33), RB20, and early RB25DET (Series 1 ECR33)

I no longer need these so they need to go.

$365.00 FIRM

post-46-1179885691_thumb.jpg

R33 GTR RB26 'Twin Turbo' Intake Piping Set

3 Pieces - Includes rubber elbow from front Twin Turbo pipe to rear turbo pipe

$120.00

post-46-1174805473.jpg

HKS GT2535 Turbo - RB20/RB25

Purchased for a project which is no longer going ahead.

The turbo itself is in good condition with no abnormal shaft play, ready to bolt on to RB20 and RB25 engines

HKS Strengthening actuator and braided lines for fitting

$1495.00 FIRM

R33 GTR Front Seats - Immaculate Condition

Replaced with aftermarket seats - You will be hard pressed finding a better factory seat - Both in top condition

$1250.00 - Pickup only - SOLD!

R32 GTR Factory Injectors

Good condition, perfect upgrade for RB20 - Genuine matching resistor pack also available

$290 - SOLD!

Brand New Genuine Nissan GTR Injector Resistor Pack

Purchased brand new - Perfect for use with GTR injectors on your RB20 :(

$170 Firm - SOLD!

post-46-1175510135.jpg

Brand New Heavy Duty Sealed Battery

Purchased from Wrxhoon's Group Buy - Didn't end up needing it - Its brand new and im asking what I paid

$140.00 - SOLD!!!!

post-46-1174805451.jpg

R32/R33 GTR RB26 Engine Covers - Black

2 x Camshaft Covers, 1 x Timing Belt Cover & 1 x Coil Pack Cover - Perfect for having custom painted - Hard to find

$450.00

R34 GTR Front Timing Belt Cover

Factory Candy Red - Lightweight plastic unlike the R32/R33 versions which are metal

Hard to find - No longer needed

$140.00

post-46-1179885529_thumb.jpg

JDM Clear Front Bar Indicators - R33 GTR (Brand New)

Clear indicators to replace your factory amber units - Bulbs included

$150.00

Genuine Ganador Electric Aero Mirrors - Skyline R33 GTS-T (2 Door) & R33 GTR

Passenger mirror missing retracting spring/clip - Needs fix or glue - Both mirrors painted black

RRP on these mirrors is over $500!

$200.00 FIRM! (Pair) - SOLD!!!!

post-46-1174554747.jpg post-46-1174554733.jpg

R33 GTR Factory ECU

No longer needed

$190.00

post-46-1174554703.jpg

Genuine Nissan GTR Key Blank

Brand new - Unused - Suitable for R32 and R33 GTS-T & GTR

$65.00 - SOLD!

post-46-1174554617.jpg

CUSCO 'Offset Number Stay' (License plate side mounting kit) - R32 GTS-T

Brand new - Never got around to fitting to my taxi

$60.00 (Cheaper than Nengun!)

post-46-1174557362.jpg

Genuine Nissan Factory Toolkit - ECR33

Very difficult to find and extremely handy - Sourced this from Japan for my GTS-T however this is no longer needed

$80.00

post-46-1174554780.jpg

Used Factory Engine Mounts - R33 GTR (L & R)

Replaced by Nismo heavy duty items during engine work - No longer needed

$20.00 (Pair)

Brand New Genuine Greddy Sports Oil Filters - Model: OX-03 (3 available)

3 Brand new sports filters - Suit Nissan RB and VG engines

Superior filtration and longer lasting that standard oil filters - Better engine protection

$30.00 Each - SOLD!

post-46-1174557778.jpg

R33 GTR Factory Front Adjustable Strut Bar

Replaced by aftermarket Japanese item - No longer needed

$140.00

post-46-1174554660.jpg

R33 GTR Factory Lower Intercooler Piping

Factory thick rubber intercooler pipes - Lower left and Lower right included

$40.00

post-46-1174805392.jpg

R32 Sedan Factory Rear Seats

Light grey with black fleck - Good condition

$20.00 - Gotta Go!

R33 GTS-T Factory Washer Bottle

No longer needed

$20.00

post-46-1174556676.jpg

JDM Clear Front Turn Indicators - HCR32

Sourced from Japan - Very hard to find items - Straight fit

$250.00

post-46-1174556869.jpg

R33 GTS-T Factory Gear Shift Knob

No longer needed

$30.00 SOLD!

post-46-1174805407.jpg

R33 GTS-T Factory Springs

No longer needed

$30.00 - Pickup Only

UAS Alloy Radiator Air Guide - R33 GTR

Needs a polish - Up Garage & Cusco stickers fitted

$25.00

post-46-1174805433.jpg

  • Replies 53
  • Created
  • Last Reply

Top Posters In This Topic

R33 GTS-T Factory Gear Shift Knob

No longer needed

$30.00

Hey blitz.. Any pics of these please?

is it in perfect condition? that is no wear marks etc?

Pics would be great tho..

cheers

Hey blitz.. Any pics of these please?

is it in perfect condition? that is no wear marks etc?

Pics would be great tho..

cheers

I actually looked at it this morning and realised I didn't get a photo :P

As far as I recall its in excellent condition and not overly worn but I will verify this tonight if you like.

I also found a Momo silver alloy 'ball' type gearknob that needs a good polish which is available for $20.

Hi

I am interested in the CUSCO 'Offset Number Stay' (License plate side mounting kit) - R32 GTS-T but iam not 100% sure if it is what i think it is. Does it move the number plate from the centre to the left or right (cant remember) and if yes will it fit a R32 GTR?

Thanks

Hi

I am interested in the CUSCO 'Offset Number Stay' (License plate side mounting kit) - R32 GTS-T but iam not 100% sure if it is what i think it is. Does it move the number plate from the centre to the left or right (cant remember) and if yes will it fit a R32 GTR?

Thanks

From memory it moves the plate to the passenger side.

It includes the bracket and bolts etc.

I would say that it shouldn't be too hard to modify to fit a BNR32 if you need to

just wondering if a GTR strut bar first a GTST...pretty sure if its the same distance. If so i will take it.

I would imagine it will fit - Someone else may be able to confirm this for certain.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...