Jump to content
SAU Community

Recommended Posts

Hey there SAU members and guests selling my r32 gtst cheap as, has to go as ive just bought another v8 project ,my car has got heaps of new parts that i guess are used now but are all less than 5k old ,brandnew splitfires and plugs ,slotted cross drilled bigger front brakes / calipers ,new o2 sensor ,4 new tyres 4k old 95-98%,new FMIC ,NEW s/s high rise manifold,plus new t3 turbo and ext. wastegate with screamer pipe plus braided oil lines etc,pioneer head unit (mp3 player ,etc plus remote)momo steering wheel,new 3" turbo back exhaust plus s/s highflow cat.and big rear cannon (doesnt drone at all when driving) this car is only an auto but it really gets up and goes dont worry about that! car located in GRAFTON NSW 2460 and is currently on ebay nsw rego till june ,contact o266449560,0266421912 ,0448269245

post-30197-1174563971.jpg

post-30197-1174564086.jpg

post-30197-1174564142.jpg

post-30197-1174564225.jpg

post-30197-1174564273.jpg

post-30197-1174564382.jpg

post-30197-1174564449.jpg

post-30197-1174564620.jpg

post-30197-1174564678.jpg

post-30197-1174564917.jpg

post-30197-1174564952.jpg

Edited by DREW32
Link to comment
https://www.sau.com.au/forums/topic/161501-1992-r32-gts-t-9000-got-to-go/
Share on other sites

interested in a swap with a R33gts with a bit of cash ur way im in melb but would b up 4 it

Hey there RicKDoG really just after a very quick sale which is turning out to be quite a long one i now have two centura project cars one has 5.2 litre motor and the other a 6 litre both with well over 450kw each and one needs finishing off as its been sitting in the shed for 4 years now and must be done so my r32 has got to go ,thankyou for your interest !

Hey there SAU members and guests selling my r32 gtst cheap as, has to go as ive just bought another v8 project ,my car has got heaps of new parts that i guess are used now but are all less than 5k old ,brandnew splitfires and plugs ,slotted cross drilled bigger front brakes / calipers ,new o2 sensor ,4 new tyres 4k old 95-98%,new FMIC ,NEW s/s high rise manifold,plus new t3 turbo and ext. wastegate with screamer pipe plus braided oil lines etc,pioneer head unit (mp3 player ,etc plus remote)momo steering wheel,new 3" turbo back exhaust plus s/s highflow cat.and big rear cannon (doesnt drone at all when driving) this car is only an auto but it really gets up and goes dont worry about that! car located in GRAFTON NSW 2460 and is currently on ebay nsw rego till june ,contact o266449560,0266421912 ,0448269245

Anybody think its too cheap does it turn people away or what?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HKS trigger kit should be very easy to integrate with a Link. It's a 36-2 crank trigger. Hard part is finding the motivation to take off the timing belt and everything on the front of the engine to install it. You also need to cut out a hole in the oil pump housing so the sensor can read the trigger wheel. Changing out the cam sensor for a 24 tooth setup is probably good enough but as others have mentioned depending on what underlying assumptions are changed it becomes more of a problem. Reading the crank state off of the cam is an abstraction that works in the general case, but if you have an edge case it makes less and less sense. There is a GTX2860 gen 2 that can take a compact 5 bolt housing so it's direct bolt on but I'm not 100% sure of what's involved. Peak compressor efficiency drops off a bit on these turbos vs -5s, 77% vs 73% but you get way, way wider region of operation. The -5s have a really strange surge line in their compressor map that is all over the place. If you think the hot side on the -5s aren't open enough you can try the Tomei T550B turbos which a local tuner seems to be happy with:
    • i need a complete tail light for my R33 GTR if you have please let me know.
    • I need a great maintenance workshop around Idaho, if you know one please let me know..
    • Hello friends, i have a good friend in Canada that looking for a good condition 1993 GTR around him please if one or know someone around you that is willing to let it go please let me know so that i can inform him.....Thanks
    • I'm mark from Idaho.
×
×
  • Create New...