Jump to content
SAU Community

-

KummaZ
 Share

Recommended Posts

  • 2 weeks later...
  • 2 weeks later...
shyskyline Enthusiast

shyskyline

Posted
Posted
hey mate nice ride.. i understand wat u are going thru, trying to sell mine, which is pretty much similar to urs, and it aint easy... even for a price like ur asking :P

hey mate how much you want for your car bro???????

and r u located in syd???

pm me and let me know hey

cheers.

Link to comment
https://www.sau.com.au/forums/topic/161615--/#findComment-3046962
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
ookami Experienced

ookami

Posted
Posted

I was the original owner and importer of this car, and can confirm it has had way more than what he's asking spent on it. The Radiator is a Koyo and the manifold is a genuine HKS one - was originally a HKS2835 Pro S kit when i owned the car (made 250rwkw on 1 bar). The exhaust is full Trust system bar the custom dump pipe - HKS wouldn't let the wastegate open properly. It was not sold by autcion and was a private sale in japan. I've got the japanese vehicle report here somewhere if someone is interested.

Link to comment
https://www.sau.com.au/forums/topic/161615--/#findComment-3114341
Share on other sites
KummaZ Enthusiast

KummaZ

Posted
  • Author
Posted

Thanks for the extra info man.

Looks like I'm getting jerked around too much for this sale so I think I'm going to keep it unless I get what I am asking for it.

I've got Saity's kit to go on it and some gold 18" gt-c' which are going to be here in a week or 2.

Link to comment
https://www.sau.com.au/forums/topic/161615--/#findComment-3116113
Share on other sites
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      R34 Gtt Wheel Offset Advice

      By GTSBoy · Posted

      What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • Kinkstaah
      R34 Gtt Wheel Offset Advice

      By Kinkstaah · Posted

      This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • AdiR34
      R34 Gtt Wheel Offset Advice

      By AdiR34 · Posted

      Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...