Jump to content
SAU Community

Recommended Posts

Hey all I'm considering getting a Power FC and a set of Adjustable cam gears for my R32 GTR and was wondering what kind of power gain will I get from that. The car currently is making 240 rwkw on 14psi. It has N1 turbo's and cams. Also approx how much would I be paying for the power FC and hand controller.

So the ecu is remapped?

Must be. Sorry havn't really had a chance to have a good play around with the car since I've had it and it's sad cause I've had it for 4 yrs now and done all of 9000km it, So I'm only really going on what the guy I bought it off of told me.

Yer either way.. The PFC is the next step if you want to try keep up with Andrew. :)

I can't wait to get home and check that thing out. I think i'll go ahead and get a Power FC I'd love to get it up around the 300 mark that would keep me happy for a while.

As soon as you see 300rwk's budjet for a new clutch. LOL

power fc is definetly worth it . Go for the jetro if you can. Mine went from 199rwk's to 185rwks with mods, and power fc added and tuned 260rwk's. I make 292rwk's now with 1.1bar with N1 turbos. You should see aleast that power level because I still have standard injectors. good luck.

As soon as you see 300rwk's budjet for a new clutch. LOL

power fc is definetly worth it . Go for the jetro if you can. Mine went from 199rwk's to 185rwks with mods, and power fc added and tuned 260rwk's. I make 292rwk's now with 1.1bar with N1 turbos. You should see aleast that power level because I still have standard injectors. good luck.

Sorry not knowing much about these what is the jetro and what are the difference's????

main diff with the D Jetro to std PFC is it uses MAP sensors and removes your AFM

just incase you dont know... MAP = Manifold Absolute Pressure and AFM = Air Flow Meter

RellikZephyr

Edited by RellikZephyr
As soon as you see 300rwk's budjet for a new clutch. LOL

power fc is definetly worth it . Go for the jetro if you can. Mine went from 199rwk's to 185rwks with mods, and power fc added and tuned 260rwk's. I make 292rwk's now with 1.1bar with N1 turbos. You should see aleast that power level because I still have standard injectors. good luck.

292rwkw's on standard gtr injectors? do you have a fuel pressure regulator? what dyno was this on?

Edited by mr_rbman

Ash,

They 'should' do it with around 43-45psi base pressure and close to 100% duty. 43.5psi they flow 520cc's & 40psi 480cc's. Well mine did so yours will be no different.

I'm unsure if the GTR's as standard run a slightly higher base fuel pressure.

Did 292rwk's on peter halls dyno. Have seen them do 299rwk's on tilbrooks dyno but was running a bit lean .

As cubes said though , getting very close to full duty. As far as the pressure , unsure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
    • not expensive, just irreplaceable if you don't go sub 60 at wakie in that thing people will start talking
    • I haven't replaced that, but I have had the doors apart on the r32 a couple of times The door skin will be held on by a combination of clips and bolts, just take it slowly and make sure all the sneaky hidden bolts are out Once the skin is off you should be able to pop that piece off pretty easily, looks like there are only 2 bolts holding it on
×
×
  • Create New...