Jump to content
SAU Community

Recommended Posts

i test drove an r32 today but didn't buy it coz it was pretty f**ked. anyways, the car was a stocker only mod it had was a POD air filter....

i must say i was pretty f**kin surprised at how loud those things spool up :P from 2.5-3000rpms all you hear is SSSSSSSSSS

and now almost a whole day later and i just can't get that sound out of my head i'm obsessed with it. i'm talking about the turbo spool up on an RB20 ofcourse i dont know if sound wise its the same as an RB25 (R33) ?

i am definately buying an RB powered car now ffs the thing only had a pod :P

if anyone has any sound files or something please post it up i cannot get enough of that noise!!!

cheers

Link to comment
https://www.sau.com.au/forums/topic/161725-stock-r32-gtst-with-pod-only/
Share on other sites

looked all over youtube there are some good ones but yeah not exactly the noise i'm after...

don't think i'll ever get sick of driving a car that sounds like that lol. i mean i've heard lots of skylines drive by that sound similar but its only when your actually in the car or driving it that you get to attached to it :P

I had a DRIFT pod on mine and the sound was sweet as and pretty loud. couldnt keep it on often on account of the 2 induction mods but dam it sounded sweet. Like that guy said above, it'll save you buying a bov, you wont have to worry about a drop in performance and unlike the venting bov's which only make noise when u back off, with a pod youll get a loud induction noise then an even louder bov noise but in the same tone (as opposed to a quiet whine then a shhhhht). sounds sweet!

haha I have a r32 with apexi pod and stock bov. It's so loud on boost. Love the sound.

I'll try and record my car later tonight if you still after the sound.

I heard the r33 bov is louder than r32 and can be swapped onto the r32 :D

Edit:

Im at uni atm so cant hear sound;

http://youtube.com/watch?v=AazMf9pucx0

Does this vid have the pod sound?

haha I have a r32 with apexi pod and stock bov. It's so loud on boost. Love the sound.

I'll try and record my car later tonight if you still after the sound.

I heard the r33 bov is louder than r32 and can be swapped onto the r32 :dry:

Edit:

Im at uni atm so cant hear sound;

http://youtube.com/watch?v=AazMf9pucx0

Does this vid have the pod sound?

yes you should record yours :(

nah that clip doesn't sound anything like it lol.

basically any turbo car will make that induction noise with a pod. my mate had major timing issues (timing belt jumped a tooth) on his CA18 powered 180 and it would spool from 1500rpm. it wouldn't go anywhere (probably would've run about a 30 second 1/4 mile, and i'm not joking), but it sure sounded fast. but some pods won't make any noise. the k&n pods that are bigger at the top than where they clamp onto the intake don't make any spool noise, but you can hear the bov. i had one on my old 180sx and a mate had one on his r33. but soon as you change to a normal pod you can hear it again.

^^ driven a 180sx(sr20) and and an r32 both stock except for a pod. there's a huge difference with the induction/spool/loudness etc. both had the same pod aswell......well they looked the same anyway..

Edited by R-SPEC

I have a 3" turbo back exhaust with high flowed cat and a Simota pod filter on my 32. Otherwise the engine side of thigs are stock. With these I get massive amounts of induction noise and quite a loud bov sound also. If I turn off stereo I can hear bov when i release accelerator at any revs... and at 100km/h there is constant induction sound. I like it!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...