Jump to content
SAU Community

Recommended Posts

hi all, i get the impression its a relatively easy job to replace the alternator on a gts-t, but it looks pretty hard to get it out from the top on a gtr (piping and radiator would have to be removed). workshop manual says that there are no additional components to remove, so does it mean that it should be taken out from the bottom??

has anyone done this? should i attepmt doing this myself? havent done much mech job before,,,

Link to comment
https://www.sau.com.au/forums/topic/162118-alternator-replacement/
Share on other sites

Done mine after it died. Basically remove top radiator hose and intercooler pipe, then undo bolts back off belt etc, and wiring.

Took me two hours start to finish and drive.

Looks like it would be harder doing it from the bottom but thats just me.

hey if anyone is interested i can put up a DIY when i finish this... one more question meanwhile, how do you loosen the a/c screw (i.e. the belt)??

and the radiator needs to be drained, right? or is it possible to unscrew the bolts somehow around the pipes?

  • 2 weeks later...

k, got it out finally, took me like 3 hours, but i'm a total newb, didnt have to drain anything, all bolts are accessible from the top and took it out through the bottom (after removing the dust cover) not to damage fan blades. some wd-40 on one of the connectors was a help as well, now to the shop to get the bich reconditioned!

  • 1 month later...

You should add as pro when they buy it they get to drive it back down the mountain obviously so its a win win situation. Awesome first drive of their new car! Haha, just a thought.

As for the Alternator:

It depends whats wrong with it but i was quoted $160 i think it was for new brushes, bearings, and regulator.

Edited by Godzilla32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done smoke test and can’t see any leak on high or low side.   checked pump and fluid can flow through. Removed the high pressure from steering and did smoke test and same on low side, no leak.   puzzled. Thinking why if it was all ok it suddenly went as car was off road for a year. Don’t want to disassemble pump yet as i can see fluid / air( compressor) can flow through with no issues
    • Which manifold mate? Meanwhile......Mark is wondering how bonnet vents would look on the NC 🤣
    • Actually,  just remembered there should be info in the threads (somewhere) about swapping to a manual steering rack and deleting power steering all together. 
    • Also had a look at the Nissan JP website looks like the 400r has a slightly shorter ratio than than the regular V37 3.133 VS 2.937 which from a guy who has driven both 3.69 vs 4.11 ratios in the S15 is bugger all. Seems that the AUTO Z runs the same ratio as the 400R but can't find any info as to if its an open or LSD? More often than not the auto LSD is open
    • Do not replace the power steering lines with this stuff. If it's anything like the Chase Bays stuff it will leak and be worse than stock. The reason why the reservoir is on the LH/passenger side of the car is because that's just where the reservoir was most convenient to fit. Don't overthink this stuff. The intake/cold side of the engine is pretty busy on these cars. And again, the hardpipe is designed to be a janky power steering cooler. In theory you can replace it with a real power steering cooler but that's really only for track use where boiling the fluid is a distinct possibility. Start with the low pressure lines feeding the pump from the reservoir. Make sure there isn't a bunch of junk in the reservoir filter. Be careful to not get ATF all over the engine bay. I hate dealing with ATF spills, you can clean it up and the slightest crevice will still release more oil that can still drip over time. You also want to inspect for leaks before you make a mess and can't tell what happened. Most likely you have a leak somewhere that is allowing fluid out and air in. Failing that it's allowing air in but not fluid out. Only place I can really see that happening is on the low pressure side because the pump will pull a slight vacuum to draw fluid in. Everything after the pump is high pressure or lower pressure, approaching atmospheric by the time it returns to the reservoir.
×
×
  • Create New...