What Rotors You Running On Your Cefiro?

[2gceffy]

hey guys

cant seem to find any rotors for my cefiro, i know what pads i run but cant find the rotors i need, im chasin dba slotted..

i beleave there na r33 all round

also what drum brake shoes do u run?

my pad numbers are..

front :DB1165

rear :DB1144

if anyone is runnin the same any info would be great !!

thanks

[Dan_J]

i think they shud be the s13 sr20det rotors

Edited March 27, 2007 by Dan_J

[4DoorWhore]

i think they shud be the s13 sr20det rotors

yup thats right...

unless you have upgraded to Z32/R32 brakes or something...

[2gceffy]

do s13's run drum hand break? i thought the hat on the rotor had to be larger to accept it...

iv got measurments of my rotors if that helps

[huddy]

runnning the 33 N/A 4stud rotors - with the 33 gtst calipers.

brake shoes - a31 / 32 / 33 etc all pretty much the same - i have URAS ones in my ceff

[4DoorWhore]

hey huddy have you tried the clips that Uras makes for the ebrake they replace the clips that attach your ebrake line to the drum... little metal pieces with the fulcrum adjusted so that the pull only takes like 50% of the effort... there pretty cool... ill see if i can get pics...

[Dan_J]

pics pics

[daisu]

If you have an RB25DE they should be same as S13 SR20DET on the front. Though if you are buying new rotors, you might as well get some upgraded (skyline) front callipers, and the appropriate rotor.

[Guest a31rb25]

soon to be running RDA R33 gtst slotted. should have them in the next few days. i'll post a report on them once fitted.

[Dan_J]

yea but dat means u got a 5 stud conversion?

or had sum 4 stud 1's made up from da press ?

[2gceffy]

iv got a full 5 stud conversion but dont want to put it on, just want to replace whats there..

i bought my ceffy with the powerplant rb20e !! now rb25det

[huddy]

hey huddy have you tried the clips that Uras makes for the ebrake they replace the clips that attach your ebrake line to the drum... little metal pieces with the fulcrum adjusted so that the pull only takes like 50% of the effort... there pretty cool... ill see if i can get pics...

nah never heard of em - but i'd like to PICS!!!

[Guest a31rb25]

yea but dat means u got a 5 stud conversion?

or had sum 4 stud 1's made up from da press ?

yeah got an R33 brake swap all round, car came from Japan with the conversion already done

[daisu]

iv got a full 5 stud conversion but dont want to put it on, just want to replace whats there..

i bought my ceffy with the powerplant rb20e !! now rb25det

Your cefiro is powered by RB25DET? And you are buying new SR rotors/pads?

I'm pretty sure you need to have the equivalent brake setup from the donor car (ie the R33 callipers/discs/pads) to pass engineering.

[4DoorWhore]

they want Y10000 for these little pieces of metal WTF....

[2gceffy]

its been through engineering like a year ago, the brakes pull up suprisingly very good !! i dont go rediculous speeds and try stop on a dime, just my drifter/daily and they are fine for what i do

i only really drift at the go kart track and that is real tight so i dont reach high speeds

Edited March 29, 2007 by 2gceffy

[huddy]

they want Y10000 for these little pieces of metal WTF....

i was under the impression these are for a caliper setup handbrake... so yer i have seen them before lol...