Jump to content
SAU Community

Changing Steering Wheels

phenline

By phenline,
in Exterior & Interior Styling

 Share

Recommended Posts

phenline Mentor

phenline

Posted
Posted

ok in a couple of days new steering wheel should arrive and boss kit. What is teh first step to taking my old stock wheel off and attaching the boss kit. Are there any guides? i searched couldnt see. what tools would i need.

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/162194-changing-steering-wheels/
Share on other sites
phenline Mentor

phenline

Posted
  • Author
Posted
it is not recomended for cars with airbag..it'll might pop out while changing severely injuring you, may even kill you...think again

well that shouldnt be a problem :dry: i don thave an airbag

95SKY Community Regular

95SKY

Posted
Posted

you will need a steering wheel puller its the easiest way you can do it by far, probably pick one up from repco or something for a few dollars?( ive seen some people do it with a Punch and Hammer Not recommended tho, dodgy way) make sure you leave the nut on at the end of the thread so it doesnt hit you in the face when it pops off .Its pretty straight forward once you take the old one off fit boss kit, clip on wire for horn then screw the steering wheel on to the boss kit, very simple and the boss kit should come with some sort of instructions :(

Munkyb0y Grand Master

Munkyb0y

Posted
Posted

the horn cover on the series 1 wheel comes off by pulling it. it feels like it wont, and then click, it pops off (the first time i did it i was looking for screws on the back, there are none).

you'll have a hicas boss kit. make sure you line it up straight when u put it on. ive heard ppl had the hicas light come on the dash when its put on wrong.

Fry_33 Proficient

Fry_33

Posted
Posted

As 95SKY said, leave the nut on the end of the thread for safety to save a broken nose. Then put a hand on each side of the wheel while sitting in the seat (I move the seat forward so I'm nice and close) and pull hard while 'shaking' the wheel. It won't come off if you just pull it, you need to shock or work it off so 'shake' it, ie alternate the pulling force from left to right side.

If needed get someone to hit a punch on the end of the thread as you're doing this to help.

Good Luck

  • 2 weeks later...
mr_squiggle_1 Collaborator

mr_squiggle_1

Posted
Posted

Hey guys just picked up a free boss kit and steering wheel, the boss kit fits a cressida but it fits my spline on my 32 gts also, the question i have is does the plastic assembley with the brass plate inside it (located just behind the stock steering wheel) come apart so i can get my horn working with this boss kit which has a brass ring which is meant to fit onto and brass plate for the horn... seems to have a few clips and everything but i didnt want to pull on things too hard incase it broke and didnt actually fit my boss kit. Has anyone encountered a similar problem? and have a solution other than buying a new boss kit cos im poor as and thats not an option at the moment.

Thanks in advance, Steve.

GTsauRus Community Regular

GTsauRus

Posted
Posted
ok in a couple of days new steering wheel should arrive and boss kit. What is teh first step to taking my old stock wheel off and attaching the boss kit. Are there any guides? i searched couldnt see. what tools would i need.

Thanks!

hi

the puller to use is a plate puller that bolts on using m6 bolts then the centre screw pushes on the steering shaft to remove the wheel.. its a handy tool because it is also used to remove the harmonic balancer off the motor with no damage[timing belt replacement].

if you have an r32 the straight ahead position sensor is different on early and later models so make sure when the wheel is straight that the big slot in the sensor wheel is inside the opto trap or else after 10 minutes of freeway driving you will get the warning light because the straight ahead signal will be not recieved too long. It wont happen in the suburbs because you are alway turning the wheel you will get the straight ahead signal when you are turning.

mr_squiggle_1 Collaborator

mr_squiggle_1

Posted
Posted
Hey guys just picked up a free boss kit and steering wheel, the boss kit fits a cressida but it fits my spline on my 32 gts also, the question i have is does the plastic assembley with the brass plate inside it (located just behind the stock steering wheel) come apart so i can get my horn working with this boss kit which has a brass ring which is meant to fit onto and brass plate for the horn... seems to have a few clips and everything but i didnt want to pull on things too hard incase it broke and didnt actually fit my boss kit. Has anyone encountered a similar problem? and have a solution other than buying a new boss kit cos im poor as and thats not an option at the moment.

Thanks in advance, Steve.

Nobody???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      The Cool Tools Thread

      By MBS206 · Posted

      I don't know that machine specifically, but I'd personally go for something with a little more kick than 130amp. Around up to 180 would be good. At the 6mm range, you're really pushing the machine hard and don't have a long period you can run for with out needing to give it a rest. Lots of MIG machines come with a regulator and hose. A lot will come with a starter roll of wire too, but it isn't too expensive to buy. I'd recommend NOT buying a massive roll too, as you don't want it sitting around FOREVER in the machine between uses and potentially going to shit. For thin sheet metal, get a roll of 0.6mm if you're doing over 3mm and above, switch over to 0.8mm wire. Even by 2mm you'd probably really want to switch. As for gas battle, it's all swap and go style now. You'll pay a bottle deposit, and then X amount to swap for a full one. I think it's like $200 or $300 for a D Size bottle upfront as "deposit", and like $110 to $150 per swap. My D size CO2/argon bottle lasts a fair bit of welding on the MIG. And I run an E size bottle on the TIG. For DIY MIG, stick with a D size bottle. If you really start to get into a LOT of welding and doing it really regularly, then upgrade. If you're like most DIY car guys, one D bottle will last you 2 or 3 years easily. I think I've been on my current bottle about 5 years. It is starting to get low, but I've been smashing it a lot more the last 6 months.
    • KKaplumbaa
      SR20 to cefiro

      By KKaplumbaa · Posted

      SR20s came with cars like the Bluebird and Primera, but the RB20 never came. The ones in Turkey were either brought in specially or from abroad. That's why RBs aren't as common as SRs. And if a part breaks or I need to replace it when doing maintenance, it's harder to find parts for RBs.
    • GTSBoy
      SR20 to cefiro

      By GTSBoy · Posted

      I would suggest equally difficult to find, perhaps edging to the SR. Turkey has almost exclusively Euro market cars, some Korean, few Japanese other than pedestrian shite. I guess they're probably losing the fight against Chinese shit like we are now too. I would vote for a BMW V8, found in a 540i in a wrecking yard somewhere in Deutschland (or possibly Albania).
    • MrStabby
      The Cool Tools Thread

      By MrStabby · Posted

      A CigWeld EasyWeld 130 can be had from ebay for $360 delivered. Good for 0.6 to 6mm, which would be fine for my requirements. I guess that on top of that you would need to buy a regulator, hoses and wire. I already have gloves and an auto-darkening mask. How is the gas bottle charged? Do you rent it then pay for top ups?
    • Ozdavroz
      SR20 to cefiro

      By Ozdavroz · Posted

      RB20 being an option from factory would mean no custom parts or fabrication required, just have to collect the right bits. Probably would be the easiest option I reckon for a motor swap. How common are SR20s vs RBs in Turkey?
×
×
  • Create New...