Jump to content
SAU Community

Recommended Posts

thought it would be good to hear what dodgy stuff ppl have done to there cars...

i have on previous cars cut springs... used speaker wire to wire up stuff (driving lights/guages)......used gaffa tape on rust and painted over it (old Bomb)

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

I ran into a street sign in my Hyundai and held the left head light, front bumper and left front quarter panel on with cable ties, then proceeded to sell the car in this condition for $7,000. Actually felt bad about this for a while :X

Dodgy things I've done to my car?? what about the dodgy things it doing to me?? - Lately I turn up the volume on my stereo - and the airconditioning fan comes on WTF!

But in the past .....

I've heald part of my wing together with racing tape. I've cabled tied my intercooler on. Actually most mods were held on my previous car with cable ties or racing tape.

lol where do i start!!

got race tape holding my front bar together cause its scraps on every bump n has cracked it, used electicl tape around my radiator pipe cause theres a hole, so many other things but cant tell

Dodgy things I've done to my car?? what about the dodgy things it doing to me?? - Lately I turn up the volume on my stereo - and the airconditioning fan comes on WTF!

But in the past .....

I've heald part of my wing together with racing tape. I've cabled tied my intercooler on. Actually most mods were held on my previous car with cable ties or racing tape.

haha yeh sometimes my windscreen wipers like to go on themselves and dont like to be turned off. have looked like a complete tool a times driving around in 30deg+ days with my wipers going nuts..

The fuel pump broke on one of the work trucks at my dads farm , so rather than walk home we found a lamb bottle these types of bottles have really long hoses to put into the lambs guts when they wont drink , this hose went into the carbretter drained abit of fuel than used gravity as the fuel pump by holding the bottle out the drivers window

I knew this fellow a few years ago to fix rust on his 4x4 he just cut it out then riveted a new piece of metal over it, a cop goes to him one night

(cop) "u can`t do that"

(bogan) "why not they do it on aeroplanes"

- Used a length of rope to remount cooler... for 5 days

- Duct taped the drivers side of the front bar after a tussle with a gutter

- Used double sided tape to mount number plates

- Cable tied pod together

- Drove around with four completely different tyres for a month

... and probably more

Painted a mates old Mazda 323 banana yellow, with housepaint, it was a good idea after drinking a lot one summer. Didn't bother masking much of it up and did the edges of anything that needed to be clear with a paintbrush... it looked dodgy then, got even worse when it got new shoes which where some huge 16" knobby rally tyres and alloy rims (they got painted yellow too) and about a 2" lift with patented MK guard flaring with a 10lb sledge as a dolly and a big f-ck off rubber mallet.

Then it was proper dodgy.

was on the way back from qld and when i got to coffs one of the rocker clips that hold the rocker into place the bolt stripped off and the only thing i could do was wrap electrical tape around the bolt and screw it back it.

It lasted months lol

cable ties are the way of life in the car scene

haha!

cable tie pod to keep it stable,

cable tie the front side & rear kit on cause i didnt have any screws,nuts or bolts..

tied the bonnet down with a piece of string coz latch was fooked lol

a friend of mine had an old hilux (paddock basher) the passenger door swung open while driving and it snapped off of the body wear the hinges are attached, due to rust!..... we welded the thing on and it lasted another couple of years!

i have seen front bars that have cracked and had heaps of cable ties put in it to hold it together.

a few cars back i had a heap of hcips on the front bar and i was going to sell it so i got a can of touchup paint and just sprayed over the top of it without rubbing it back... or cleaning the bugs off. looked great afterwards.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Any number of different ways. Have the coils draw sufficient current to provide contact wetting. Use different contacts in the switch, either by material or design, better suited to the low current drawn by a relay coil. Etc.
    • Hmm, how does the R34 manage to have headlight relays then without getting excessive carbon buildup on the headlight switch contacts?
    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
×
×
  • Create New...