Jump to content
SAU Community

Recommended Posts

.86 rear housing, .60 front, made 250kw on low boost, virtually no lagg over stock turbo

Do you have graphs to back up this wild claim? 250kw, low boost, no lag :)

I am in the market for a turbo, so i do have a geniune interest.

before you put up an insult do some investigation yourself. check the link below, the lower rated 28/71r is rated at 390hp which equals about 285 kws.

who is talking bs now??????

http://www.horsepowerinabox.com/HPIAB2/turbochart.htm

great turbo upgrade for rb's. buyer will be happy. depending on sizings, it is the equivalent of the HKS GTRS

larger ARR and trim will be more suited to rb25

i run one in the smaller ARR and trim on my rb20 and made 230rwkws on 18psi with better response than the neo turbo i had on previous

Since item is sold, i'll reply:

before you put up an insult do some investigation yourself. check the link below, the lower rated 28/71r is rated at 390hp which equals about 285 kws.

who is talking bs now??????

http://www.horsepowerinabox.com/HPIAB2/turbochart.htm

Doing research is one thing, understanding it is another :( ; and unfortunately you have not understood the specs.

This turbo is rated at 440hp=310kw approx

This 310kw is at maximum flow at flywheel in ideal conditions without losses, etc. Consider losses in driveline, fuel inconsistancies, engine wear, etc and you'll probably have 250rwkw, but at maximum flow (max. boost), which is far higher than the 12psi claimed.

So try and understand what you read, before going off at people.

rb20inside: The Neo turbo is larger than the r33 rb25 turbo. So yes the Neo would be pretty damn laggy on a 20 :happy: 230rwkw at 18psi sounds about right for this turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • BTW, the reason I came in here to "update" this list was that the Garrett G Series II range have been released and I've updated the list with their flow details if you're curious to check how they fit with previous Garretts and other brands The G-Series II G35 990 looks like a banger...
    • Hi all, I thought I'd put one of these references in here before but it seems I haven't - not sure how many people are actually using this place still but I feel like there are guys lurking about who might find this reference useful or interesting.  A lot of the time people don't catch key details or even fully understand how compressor maps work - or don't even look at them and just go from heresay about deciding how different turbos may compare, but I've been putting together this table over the years as a quick reference to get a gauge of how certain compressors compare to cut down the time that can be wasted looking around aimlessly. * This relates purely to compressor flow, so won't necessarily reflect the outright capabilities of these turbos as the power potential also comes down to the turbine side.  If you understand this, you should be able to use this 😃 * The inducer and exducer size listed are the mm of just the compressor wheel * The values under the "psi" headings are "lb/min airflow" and reflect the maximum airflow that compressor supports before it's efficiency dips under 65%, or it reaches it's maximum speed - whichever comes first. Any questions, or requests for other turbos which the compressor map is available for then let me know 🙂
    • And what you pay for a pack of 8 bolts and nuts at Bunnings, will land me 200 of the same nuts and bolts from a fastener shop.   M12 * 1.25 IS a standard. It's not like ordering M12x1.25 and hoping the thread pitch is right. Unlike ordering an ounce, will get you 4 different amounts depending on which ounce someone takes it to be. Your issue is a supply issue.
    • Try using Penrite 80W140, has Limslip predosed into it 
×
×
  • Create New...