Jump to content
SAU Community

Recommended Posts

Hi everyone,

Strathfield fitted an immob (3 point cyclops) and alarm to my car about two weeks ago. When I picked it up, it all worked fine. Then I tried to drive it last night (first time since the installation) and I found that after I switch off the immob and try to start the car as normal, it just makes this clicking sound. It sounds like the starter motor but it also makes a beep every time the starter motor clicks.

Strathfield reckons the battery's dead because I haven't driven the car in two weeks. Thing is, I had a new battery put in when the car came through compliance about two months ago. Does this sound right to anyone?

Sg.

Link to comment
https://www.sau.com.au/forums/topic/16313-immobiliser-question/
Share on other sites

  • 2 weeks later...

I have 3 friends who put that same product in 2 skylines and a commodore...

The installer was also telling one of my friends that he had someone complain about that too (in a Camry) - while he was getting it installed...(and explained that he probably didn't use it properly - as an excuse)

so all 4 people in question had the same problem, and got the same reply...that you have to activate the alarm for it to NOT drain your battery...which can make sense electronically speaking...

HOWEVER...thing is, the 3 of the 4 I know would never have left their car without activating the alarm...

so whether Stratties like it or not, that alarm drains the battery and even with a new battery, the car is dead (or low) after a few days of not driving it...

because they install a lot of them, and most people drive their cars every day, the problem is hidden to them...with only a small handful of people actually going back to complain...the rest live with it...(I hate that part of the population)

who knows, perhaps the alarm is great, and they use some super high-powered flashing LED which is doing all of the draining...or maybe its the sensor sucking the juice out of the battery...

either way the package has a flaw and people should know that it will leave you flat after a few days of not driving your car...

  • 5 months later...
  • 4 weeks later...

If this alarm is is draining the power out the battery, then it's uselss to you.

Sounds like a fault of some sort or they havent hooked it up right.

When I went shopping for an alarm, I asked the question 'Can I leave the car in the city overnight and not get stolen."

Apart from being towed offcourse, i got a Mongoose Alarm installed for $500.

keep the alarm simple, no fancy window wind ups and all that. Less chance of something going wrong.

3 point cutt off, fuel pump, ignition, starter...battery backup warranty and gurantee if car get stolen in first 12 months.

hows that for an alarm co.

Hey sigsputnik, has this problem been fixed by putting in a new car battery? I doubt u would need a new battery after just 2 months. Try jump start it and see what happens.

Also, does the actual alarm unit have a battery in it too?

My car makes that clicking noise under the dash coz the alarm is f*cked, i just disable everything and the car starts fine so i basically have no alarm atm. Just wondering if I have the same problem.

If your battery went flat, normally the siren goes onto the backup battery and starts making noises (I've had it happen when the battery was a bit low, but would still start the car - siren started screaming during cranking).

Try inserting a relay into the starter trigger wire, so it supplies full battery power to the solenoid switch.

  • 3 weeks later...

I'm planning on booking it back into Strathfield early in the new year when it's a bit quieter. I'm not exactly sure what I'm going to ask for yet.

_turtle_: no, it isn't the battery, it's completely sound. Not sure if the alarm has its own battery.

I think I might get them to remove the old alarm and then put something else in. Swordfish, that Mongoose thing sounds great. I guess I just don't trust mine perfectly any more. I'll let you know how it goes.

autobarn installed mine, and since then the airbag light has been flashing, i took it back and they wont fix it!

but my alarm works really well, 4 point system, but i agree with swordfish, no fancy window windups coz obviously they're the ones that will drain your battery and be tempremental.

good luck!!

Id say its your battery, when mine died it did exactly as you described. All I could here was a rapid ticking when i turned the key and the engine would not crank. Also the battery voltage dropped to 7v :Oops:

Perhaps just see if you can borrow a good battery as a test, I stole my dads for a while.

Ive had similar problems before on my old car. Basically it wasnt my daily driver and if I set the alarm on my car and didnt drive it for a couple of weeks the battery would be dead. So I was never able to set the alarm on my car if it was in my garage.

This is why I am considering the Boomerang alarm/immobiliser. That has as part of its system a "voltage" meter and will automatically restart your car and charge the battery if it detects a drop in charge. This can be a damn handy thing if you have a car thats not driven regularly but you want to keep alarmed.

Blummin hell that's clever, AR :(. Still, feels a little like robbing Peter to pay Paul getting the car to start itself to recharge the battery. Surely there must be some way of working out why it's going flat?

Dawg, it isn't the battery. The battery is a brand new heavy duty. This only started happening after the alarm was installed, which was quite a while after the new battery was put in.

hey guys, sigsputnik has said "I found that after I switch off the immob and try to start the car as normal,"

so are you saying that even though when he turns off the immobiliser he can start his car as normal, that the battery on the car is running low? if that is the case then i need to change the battery on my car too but i don't really think so seeing as we can start up the car fine with the immobiliser off.

sigsputnik, get an amp meter, and see if you can trackdown the drain, my cousin wondered why his battery on his commo went flat, and it turned out to be his new sheepskin seat covers holding the electric motor on the VT commo seats on continiously. So sillier things have happend! :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
    • The bushing has failed, not all that uncommon for a car of this age.  Any mechanic should be able to push in a new bushing for you, or you can probably buy the entire lower control arm, complete with bushes.
    • Could you not use "thermal" spacers to give the clearance, like the ones I used between the blower and head? That raised the manifold height by around 10-15mm Albeit the ones I used were for cathedral ports, but I assume they have similar for rectangular ports????
×
×
  • Create New...