Jump to content
SAU Community

Precision 5mm Hub Centric Spacers

CEF11E

By CEF11E,
in Fabrication

 Share

Recommended Posts

CEF11E Veteran

CEF11E

Posted
Posted

Quite often when you get a really good deal on some 3 peice wheels you overlook the fact that the offset is not exactly what you need.

I bought a set of wheels that are +42 and ideally they need to be +35 to +37 so I need spacers. At the moment I have some rubbish ones that look like they were made out of tin foil and the holes are even elongated so they are multifit.

the wheels are perfectly balaced and without spacers there is no wheel shake but with them there is noticable steering shake at 100kmph so the spacers are not holding the wheel flat on the hub. (what a suprise)

So I need a pait of hubcentric 5mm to 7mm 4x114.3 spacers that are a flat peice of steel.

Does anyone have access to a lathe and if geven specs could make a pair up for me? happy to pay :laugh:

Link to comment
https://www.sau.com.au/forums/topic/163202-precision-5mm-hub-centric-spacers/
Share on other sites
Beer Baron Grand Master

Beer Baron

Posted
Posted

how in the world could you make 5mm bolt on spacers mate? so of course he is not using bolt on spacers, and there is nothing dodgey about a proper spacer machined out of a piece of billet aluminium. we have some about 30mm on the race car and have no problems at all.

pablo101 Mentor

pablo101

Posted
Posted

yea i get steering wheel shake too at 100km/h

are spacers really illegal? because I have just put 245/45 on my front wheels and it looks like there is no gap between the suspension top and the inner end of the tyre. I think it is hitting when I turn or go 100km/p.

Im thinking of getting these spacers but im not sure if they are legal? They are not bolt on, but go between the hub and wheel

the link is here:

WHEEL SPACERS 5mm

NIZ-26T Proficient

NIZ-26T

Posted
Posted
where can I find good ones?

ok if any one needs them ill make a couple of sets but if there are more than 10 sets ill make a cnc program

just need PCD of stud holes O.d and I.D and thickness

contact via pm

cheers

brendon

CEF11E Veteran

CEF11E

Posted
  • Author
Posted

I ended up getting some machined up in sydney.

they are alloy and ave hubcentric rings with just my 114.3 x 4 pcd. they are 8mm thick. but to use them captive insert nuts have been used that actually have a shank that goes through the wheel and centres in the whole in the spacer.

sorry it's a bad description but they are an impressive bit of kit.

  • 2 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      Update time!  The JZX110 had some maintenance needing to be done, so a lot of the seals with replaced to fix some oil leaks. Also used this opportunity to whack on a front mount that I'd bought some time ago.  I also finally got the rear lip painted and fitted.  I then got the exhaust done. It's just a catback for now. Custom made 3" stainless with a turn down. I could have a tip coming out, but it will require cutting the rear lip and possibly the bumper itself. So far I do like and it's made the car a little more zippy.  Close out with some nice pictures of the cars and a sneak peek of what's next. 
    • MBS206
      Can't put strut back

      By MBS206 · Posted

      Once you learn it all, you find you do the job once. But this is the best way to learn, as you won't forget the lessons
    • Rezz
      Anyone know what this front bar is for series 1 R33??

      By Rezz · Posted

      Edit: It's now known as "R Performance" and is still in operation.
    • PranK
      The FD RX7 is the best looking 90's JDM car

      By PranK · Posted

      This lady loved her FD for 25 years!  https://www.topspeed.com/80-year-old-woman-donates-fd-rx-7-mazda/ My brother in law. He's nice enough to let me drive it whenever. He'll likely not see this, but I'll try: @r-is-for-fun got any pics?
    • Rezz
      Anyone know what this front bar is for series 1 R33??

      By Rezz · Posted

      Just something I found searching for more info on Emotion R, apparently the ECR33 Skyline GTS25t was either originally black, or there were two of them, the black one being the original demo car, then building a white one which was part of the 1997-onwards (to at least 2008!) Cockpit Tatebayashi Tokyo Auto Salon booth demo cars. It appears that Emotion R closed down in 2008 and was declared bankrupt in 2010: http://bank-db.com/hasan/208365. Scan of a magazine with the black R33 from 1996: Wayback machine archived page from May, 2000: https://web.archive.org/web/20000529061027/http://www.emotion-r.co.jp/skyline.html Option magazine with a few photos from the Cockpit Tatebayashi booth at the Auto Salon from various years: 2002: http://www.jdm-option.com/photo/index.php?action=item&category_id=154&image_id=3507 2003: http://www.jdm-option.com/photo/index.php?action=item&category_id=137&image_id=3033 2005: http://www.jdm-option.com/photo/index.php?action=item&category_id=116&image_id=1831 In 2008 Cusco website mentions that the Cockpit Tatebayashi ECR33 was displayed at that year's Tokyo Auto Salon: https://www.cusco.co.jp/event/2008/12/post_735.html As of 2021 it appears that the ECR33 demo car ended up being exported to Florida, USA: https://rmcmiami.com/inventory/1996-nissan-skyline-r33-cockpit-tatebayashi-demo-car-big-te06-turbo-endless-brakes-lsd-450hp/ And finally here's Google streetview of the Emorion R garage in 2023 which is amazingly not only still there, but the showroom is still full of various parts in stock and funishings, etc.: https://maps.app.goo.gl/ttyEAZdZLyzermyT9 Apologies for nerding out a bit. I used to love doing this 20 years ago on SAU and got a bit nostalgic for a moment... 😅
×
×
  • Create New...