Jump to content
SAU Community

Recommended Posts

Hey all

Im looking for a ECU for my R32 GTS-T

Been looking at a Greddy e manage ultimate or Apexi power FC.

Looking to spend between 1,000 - 2,000

Now i know the power FC's are hard to come by now due to them being discontinued, taking this into account

How good is the e-manage ultimate compared to apexi ???

Also what about motec and unichip ?????

Would i find some for the price range im looking at ????

Will be wanting the ECU to be capable of upto 300kw in a few yrs time....

Any info would be good

Thanks guyss.....

Link to comment
https://www.sau.com.au/forums/topic/163364-ecu-the-best-option/
Share on other sites

i dun get it... why would u opt for something like that?

for a 90's model car wouldnt something like the wolf 3d version 4 ( even 3 ) or a microtech lt 12 or lt-8 with coils be suffecient?

ultimate e manage is still piggy back.. man for 300rwk i'd go for a microtech lt-12

haltech interceptor, a great piggy back unit that will make 300rwkw's also there is the boost controller solonoid which is is less than half the price of the pfc boost controller

hmmm that Haltech Interceptor looks very good...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...