Help Needed,

[cliff25gtst]

hey guys i just popped my hood before and found this loose vacuum hose, has something broken off or does it jst connect onto the part somehow?

help would be appreciated, can post up more pics if needed

[cliff25gtst]

anyone

[jimmytim]

I can't work out which part of the engine bay this is at....

[cliff25gtst]

I can't work out which part of the engine bay this is at....

down the front right near the air pod

[cliff25gtst]

its off the can one line says fuel tank and the one that the line has come off says purge.

[cliff25gtst]

so does anyone have a pic of there fuel purge tank that i could see?

its the line that runs back to the inlet manifold to the purge line on the tank cannister.

anyone got pics? so i know if i have lost a part or where the line connects to??

[MANWHORE]

That's a part of the charcoal canister. Flip it upside down, and put it back on. The charcoal can normally has that knob on it.

[cliff25gtst]

That's a part of the charcoal canister. Flip it upside down, and put it back on. The charcoal can normally has that knob on it.

yeh it is connected to the charchoal cannister still.

but then i have a hose running on the back of this part but the front has two open holes with nothing running from it and i have one lose hose nno connected to anything.

[jimmytim]

It's cold outside, so I just browsed through my comp for photos...

Don't think this is helpful though....

Edited April 7, 2007 by jimmytim

[MANWHORE]

There were two different styles of charcoal cans if that makes sense. One has the knob on it, one doesn't.

[cliff25gtst]

There were two different styles of charcoal cans if that makes sense. One has the knob on it, one doesn't.

yeh mine has the knob thing on it.

[humz]

just f*k the can off all together.

d/c from the cross over pipe- plug up the lines, walk to your nearest bin and drop it in.

easy fix

[Blonk]

Personaly, I would throw a tin of diesal over it and buy marsmellows......

You wont mis anything .. Except the wombat report

[cliff25gtst]

yeh its only for the fuel vapurs aint it?

yeh if i get rid of it do i just block off the lines that run to the manifold?

it wont cause me any trouble not having the cannister will it? not going to do anything if it dont run to the manifold anymore/??

[Devils_Advocate21]

Just plug the lines at the manifold end and you should be right, maybe slightly different idle sometimes Only works on vacuum the charcoal canister hope that helps