Jump to content
SAU Community

Recommended Posts

ok well im new to skylines (owned an s14 and currently a 180) and someone is keen to swap an auto 4 door 34 gtt for my car and some money. Im a bit concerned about the km's. its a 1999 with 150,000 ks or there abouts but is pretty much stock and never run more than stock boost. should i be concerned about such high k's on a 34?

also how are the tiptronic autos. it has the paddle shift. anyone had any experiences with these?

thanks

Link to comment
https://www.sau.com.au/forums/topic/163743-some-r34-questions/
Share on other sites

dont think klms would say much - if the car drives well, then thats all that matters. Mine supposedly had 73,000 when i bought it (96 R33). 7,300klms a year? I didnt trust it, but went on the overall feel of the car and how it drove. Its probably done more like 150,000klms.

If you are thinking of getting the 34, then get a full test done at a performance workshop - thats the only way you will know if the car is a dud or not.

No idea about the tiptronic though - but from my experience driving other cars with tiptronic - i find them to be a waste and they divert your concentration from driving the car to focusing on changing. Manual FTWl! :yes:

The R34 GTT tiptronic is ok, i have it in mine as it is a GTT sedan and only came in Auto from the factory.

I don't really use it as it is just as easy to get the auto gearbox to do what you want, occassionally is fun to use tiptronic mode but no real advantage except you can hold in gear a little longer but computer still overrides when the engine says its time to change gears.

The R34 GTT tiptronic is ok, i have it in mine as it is a GTT sedan and only came in Auto from the factory.

I don't really use it as it is just as easy to get the auto gearbox to do what you want, occassionally is fun to use tiptronic mode but no real advantage except you can hold in gear a little longer but computer still overrides when the engine says its time to change gears.

The computer will only override the tiptronic in order to keep the car from stalling. ie. if you're in 4th and go below say 50km/h it will drop back to 3rd to keep the revs up and if you slow down and stop it will eventually work its way back to 1st gear, but that is the ONLY time it will automatically change gears for you in tiptronic mode.

Any one who's driven a ford falcon with tiptronic knows that the car will still change gears as per normal even in tiptronic mode (it treats it like "power mode" apparently) yet in the R34, the tiptronic is more like manual mode where the car will not change out of the gear its in until you move the lever or if it needs to keep the car from stalling (as above).

I have a s2 stagea (same engine and tiptronic gearbox as r34) and dont use the tiptronic much. As lanky71 said, its just as easy to get the auto to do what you want by using your right foot - it will "learn" your shift patterns and adapt to your driving style a bit.

If you want to improve it - get a MV Automatics Shift Kit installed. Makes it a LOT better!! :laugh:

when i first got my car i used the tip tronic alot.... after a few weeks it easier to just leave it in auto mode.... but tip tronic is good to have..... sounds like a manual when u have an sports exhaust and gear down....

Edited by rgr34
r34 gtt sedan did come as manual from factory

but rare and now expensive

when i had a 34 auto id pretty much agree with everyone here , its ok , fun sometimes but not as good as a manual

Yes sorry, did some research after posting those comments and have found that they do come as manual but like you say rare as, also there is a GTX Turbo but it is just as rare and apparently a GT4 Sedan but even more rare, only even seen them in coupes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, while being... strictly unnecessary. Tuning is a bit like quantum physics. You don't need to understand what Schroedinger's equation actually means. You just need to run the computation and accept the answers. With tuning, you just push page up/down until the exhaust tells you that you've got the fuel right. The VE can stay hidden behind the curtain like the Wizard of Oz and you'll never need to know what he looked like.
    • The second part yes, the first part about easy VE calculation is something I've seen a few people talk about online.
    • You 100% could do that, would save money on a gym membership lol. But yeah, getting a cordless orbital sander will feel priceless coming from doing it manually.  Good luck with it mate
    • I initially was going to do the whole car with a block then realised, it would be a bigger monster of the job 😂 I guess that's all part of the learning process. I appreciate all that advice, I think I got a good idea on how to tackle this whole job.
    • I admire your efforts with the scuff pad.  As a mere mortal, I use this for the baulk of my sanding work- https://sydneytools.com.au/product/milwaukee-m18bos125-0-18v-li-ion-cordless-125mm-5-random-orbital-sander-skin-only Yes you can easily create a low spot while sanding. There are 2 types of filler, 1 part of 2 part. The 2 part filler will get used for large corrections and the 1 part filler will get used for pin holes and areas that only need slight filling.  Depending on how zealous you are with the sander (very easy to do with a power tool) or if you are chasing rust etc, yes those low spots will need to get filled or you will end up with a very obvious defects in the paint.  Using the guide coat and large sanding block, high and low areas will be revealed (watch youtube videos for a good visual on this). Its up to you if you think its worth the effort to make the car completely flat before you spray it (you make it flat by filling the low areas).  At the end of the day, it comes down to time. The end result comes from the level of prep put in to the car. If you want a perfect result, you have to put in the time during the prep stage or else it will be impossible to achieve a perfect result during the spraying process. 
×
×
  • Create New...