Jump to content
SAU Community

Recommended Posts

Recently i did all the plastics for my mates 34,heres some pics for you guys that wanted to see what a black colour would look like.its called saturn black its also heat and chemical resistant. theres some befores and afters in there too.

post-38410-1212382807_thumb.jpg

post-38410-1212382865_thumb.jpg

post-38410-1212382923_thumb.jpg

post-38410-1212382971_thumb.jpg

post-38410-1212383033_thumb.jpg

post-38410-1212383072_thumb.jpg

  • 5 months later...

has anyone done this on a r34 with the popup screen? What extra steps are involved if anyone knows ???

Also does anyone know a good shadow silver/charcoal paint colour? I don't wanna do it up in black so as to leave a bit of contrast (like the original)

Oh and does anyone know if you can replace the led/light inside the radio/AC Unit ? my dash leds are blue and the radio/ac are green so I'd like to change these to blue as well when I take all of it out

Jack, any chance of taking a couple of piccies of your mates interior now with all of it back in place? Good work by the way, wish I had mates like you :P Cheers

Edited by Delta Force
has anyone done this on a r34 with the popup screen? What extra steps are involved if anyone knows ???

Also does anyone know a good shadow silver/charcoal paint colour? I don't wanna do it up in black so as to leave a bit of contrast (like the original)

Oh and does anyone know if you can replace the led/light inside the radio/AC Unit ? my dash leds are blue and the radio/ac are green so I'd like to change these to blue as well when I take all of it out

Jack, any chance of taking a couple of piccies of your mates interior now with all of it back in place? Good work by the way, wish I had mates like you :banana: Cheers

In my first post I've got a recommended colour for the plastic, go to supercheap and check it out, it's a good match :)

Recently i did all the plastics for my mates 34,heres some pics for you guys that wanted to see what a black colour would look like.its called saturn black its also heat and chemical resistant. theres some befores and afters in there too.

So you sprayed them all white as an undercoat, and then used the saturn black as a 2nd coat??

  • 2 weeks later...

What about those duplicolor brands.. are they any good? they have the pewter color that matches nissan sonic silver which the guy from autobarn showed me from the book.

Do you Guys spray clear coatings after applying the paint?

I used 3 coats of clear coat on the trim parts I painted. A bit overkill and when the sun was out the gauge cluster would reflect a bit onto the windshield

would probably need 2 coats max for the gauge cluster, put as many coats as you like on the rest :(

I posted these somewhere before but here's my effort:

DSC04159.jpg

DSC04259.jpg

DSC04265.jpg

I used powerplus paints too

Edited by Yo-Yo

hey guys, how do you take off the aircon surround??

hmm okay i had a look at it,

aircon is gonna be a tricky one to do with the red & blue temps around the dial which i want to keep.

ill do everything else tho.

see how i go

good to do over the xmas break :)

Edited by dori32

looks very nice .. I'm gonna do the same to mine but do the vents and aircon and perhaps the top lcd cover (I have that popup screen) in black. Then find some nice silver pedals and a silve bezel insert for the console and the car shouldn't look so 1998 anymore (maybe a bit more like 1999) :banana:

Speaking of which I'm going to go and rip out my (broken) lcd now ..wish me luck!

Edited by Delta Force

ok whatever you do don't use SEPTONE paint/primer .. this shit is just evil, I wasted 4-5 hours only to realize the paint itself is a POS. Will go looking for Powerplus paints tommorow.

i wanna do mine but the only thing that worries me is the AC controls. the blue and red thing around the knob did you guys just tape it up and spray painted the whole thing???

and can some one provide a step to step process and dismantling the ac unit???

the whole centre console (ac, stereo etc) slides out .. it's just 4 screws holding it in there. The blue/red on the AC is piss easy, just take them out as well as the clear plastic and spray the rest. Then glue them back in afterwards, it's no big deal trust me.

yeah it's all just clipped in ... the only thing you should be careful about is removing the vents - use a thin screwdriver from the left hand side and they'll pop out too. Make sure to protect the corners with masking tape to avoid accidental scratches when poping out vents and sliding out the console etc

To reveal the 4 screws holding it all in place, remve the gear shifter surround (pops out once you remove the screw behind the ashtray) and the vents - don't try removing any other fascias whilst the console is still in there. The vents will reveal the remaining 2 screws.

Edited by Delta Force

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A seat I find stupidly comfortable to sit in is the one in a friend's Merc Race Car. It even has the huge wings that wrap around your head. Best ever. Only issue is climbing through his scaffolding he put up in the doorway of the car... Ha ha ha. I sat in that seat for a couple of hours doing wiring. Another stupid comfortable seat I find, especially if my back is aching, is my OMP fixed back bucket seat too. I'll just sit on it when I'm exhausted in the garage sometimes to relax!
    • I just got off the phone with Dean from Vosta in Brisbane. They are the ones that do the replica seats and they have a shop full of seats for my to try out. Lovely guy.  I haven't decided whether to go genuine or replicas, I'm leaning towards Genuine at this point but who knows.  Also thinking the STRADIAs are the way to go VS the GIAS since they have a lower hip edge and would be easier to get into. Don't really like the idea of arm rests on the models to the right of this diagram either, maybe they can be removed?
    • From my own first hand experience, keeping power for a fun Street able skyline down at a responsive low 200 wheel KW, is the best. It makes it super drive able through the twisties, you're not just smashing mass wheel spin, or only able to open the throttle for a split second before being at absurd speeds. That said, plenty of people like being morons at more than double the speed limit on public roads and hence are happy with 600whp and seeing 200kmh fly up frequently and fast. Also, at that low 200, a GTR can still do a decent quarter mile, and with a bit of fancy  clutch work (foot, not the parts) can still beat many many cars in a traffic light gp, even in the wet.
    • Good news. So it went up to 16.2 volts as per the manual then dropped to 13.6v where it maintains that voltage. The sizzling sound stopped after that. All is looking ok. Car starts up same as usual.
    • As strange as this sounds (as they are fixed back), my Bride Xero CS seats are the most comfortable seats I've used.  I vote go genuine.  The only downside I've found is on very long drives, you can't reposition your body while driving. So even though its comfy, being locked in the same position eventually becomes uncomfortable. I find myself stopping every 3 or so hours to stretch my legs on long drives. 
×
×
  • Create New...