Jump to content
SAU Community

Recommended Posts

Hi guys,

got my hands on a set of Advan A048 semi slicks and i was just wondering what these would be like on the road for lets say daily driving.

anyone used them or similar semis on the road?

just wondering coz my tyres are nearly worn and if they will do the job, may as well put them on.

Thanks

Stel

Link to comment
https://www.sau.com.au/forums/topic/163997-advan-a048-semi-slicks/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

they are fine for road use. very soft tyre though so will wear out quite fast. the only problem I've ever had with them on the road is when they were fairly worn they were horrible (dangerous) in the wet. when new though with lots of tread they were not bad in the wet.

Hi guys,

got my hands on a set of Advan A048 semi slicks and i was just wondering what these would be like on the road for lets say daily driving.

anyone used them or similar semis on the road?

just wondering coz my tyres are nearly worn and if they will do the job, may as well put them on.

Thanks

Stel

they have been my daily driving tyres for 2 years

i <3 them! will never go back to normal tyres

they are fine for road use. very soft tyre though so will wear out quite fast. the only problem I've ever had with them on the road is when they were fairly worn they were horrible (dangerous) in the wet. when new though with lots of tread they were not bad in the wet.

hmm weird this richard. i find them rather nice in the wet. compared to when i had the 34 wheels on with falken azenis (non semi ones)

I used to use them on my daily driven J31 maxima. I found them to to be pretty good with the suspension I had in the car. I agree with baron though once they get down on the limiters they are very poor in the wet. Id generally use them till they got a bit low then put them onto the Silvia and get a few hard laps out of them before they were absolutly worn out.

Compared to the RE55s which I now use on my GTR the Advan was a much better tire when new but faded away quickly after a few cycles. As a street tire the RE55s will last longer and you wont notice any difference in performance.

Cost wise the Advan is typically 50-60 bucks more than the RE55s.

If you need the traction then they're good, but otherwise I wouldn't suggest it on a daily driver.

Ignoring the wet weather grip (I found the A032Rs I used to be quite reasonable in the wet), the tyre roar will give you headaches. Turning up the stereo didn't help me much.

The lack of tyre life is also a concern, if you're paying for it.

That and, if you get pulled over, the cops assume they're not street legal and you have to spend time explaining it to them. And once you do tell them its "street legal race rubber, like on tarmac rally cars", inevitably your bonnet spends a lot of time in the "up" position while the cops try defecting you for something else.

Put these on today, noticed a big difference in traction...even in the wet suprisingly (my old tyres where shit so not that much of a suprise).

With the old tyres, i would spin in dry weather once i hit about 4.5k to redline in first gear, with these there was nothing.

As far as noise goes, they dont seem to be too bad. I can't hear them when the car is in gear, but when i put the clutch in i can hear a slight sorta whine. Not too loud to make it a problem.

Thanks for all the advise.

Edited by Stel

In my experience, the tyre roar becomes noticable above 80km/hr. The Falken RS-V04s sounded like a low flying prop-aircraft from 60km/hr. The A032Rs only got noisy at about 90km/hr. The D01J's on a mate's S15 started humming at 80.

Either way, it makes the commute to Wakefield Park an absolute pain. :blink:

if you put them on yesterday how have you sampled their wet performance? I didn't think it rained anywhere in sydney yesterday? lol just struck me as odd.

It rained in my area last night. Im in Beverly Hills/Kingsgrove.

Some technical stuff.

A048R’s are the control tyre for a number of CAMS circuit racing classes, Combined Touring and Improved Production being a couple of them.

They come in two “compounds” (medium and medium/hard), although Yokohama Australia swear that they are both the same “compound” but with carcass differences. Both compounds are not available in all sizes.

The range overseas is greater than what Yokohama bring to Australia.

They have ~5.5 mm tread depth compared to ~8 mm that you find on most normal road tyres.

They have the normal wear bars at ~1.5 mm tread depth

The lack of useable tread (5.5 – 1.5 = 4 mm) compared to normal road tyres (8 mm – 1.5 mm = 6.5 mm) means ~40% less tyre life.

It also means less water dispersion in the wet, which just get worse as they wear.

The tread compound is 40 to 60 duro, road tyres are typically 100 plus.

The soft tread compound, compared to normal road tyres, means ~30% less tyre life

So if you get 25,000 k’s out of normal road tyres you can expect to get around 8,000 k’s out of A048s.

They are VERY critical on alignment, for example too much/little camber will wear them out VERY fast. So make sure your wheel alignment settings are spot on for your usage patterns.

:) cheers :thumbsup:

  • 3 months later...

Sorry to dig up an old thread

but Im also interested in some more feedback on how these go for road use

Im aware of the noise and wet weather grip when low on thread

but considering these are OEM tyres for lotusses it cant be all that bad for road use, right?

Im particularly interested if these tyres heat cycle as much as the RE55S

anyone with experience with these tyres able to compare them with RE55S or R888 or DZ03?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm with GTS, that's not an actual overheat issue. That's an electrical issue.
    • So, it's clearly an electrical problem. Either with the gauge itself, or the sender. It appears to be voltage sensitive (ie, alternator output affects the reading.
    • Yes, at this stage of SAU threads, I  automatically assume that anyone here knows that everything depends on each and every setup and its choice of parts and what an individual wants from the setup. I think your misunderstanding what I've said, I'm not saying your curve will move to the right.. I'm stating the opposite; that my setup has a much larger turbo than my last one, my current exhaust manifold runners are 2-3x longer than the last one, the intercooler is longer and thicker (hks 103mm thick), the itbs are now oversized from 45mm up to 49mm, and the plenum is now a larger Nismo plenum that's been port matched. As a result, I'm making more power, torque and boost 1000rpm earlier than my last setup. My curve moved left, in a big way. You guys with 800-1000+hp turbos should be considering hks v-cam or the other Japanese company Sakura who makes RB25 Neo vct adaptor kits for RB26's. they all make more power / boost / torque far earlier and higher peak numbers. Dahtone Racing modifies the Hks v-cam systems to his own specs and he also developed the worlds first and best dbw individual throttle body kits, to complement his V-cam. Every single car is 800-1200+hp and they all produce huge gains in response and peak power. 
    • I have a 2008 Skyline 370gt with about 160,000 km on the clock currently. A while ago, I noticed the temp gauge would start climbing but it comes down when I give it some throttle. I took it into the shops. The technicians comments are transcripted below. Reported they couldn't find anything wrong with the vehicle mechanically and they pressure tested the cooling system. Funnily enough, the technician commented that the temperature dropped back down when the car is stationary but this is when I'd notice the temp gauge to be climbing. Just wondering if anyone else experienced anything similar to enlighten me? Cos at the onset, the temps were going up one tick and then comes back down when I step on it. Now, the temps are climbing all the way to the top of the gauge, and it's making me very nervous lol. It also doesn't come down to the neutral position anymore. PS I do have a small exhaust leak near the drivers side caused by when I got f**ked by a really steep driveway at a mall I never visited before. Not sure if this would affect the sensor. Technician comments: Check and verify Fan/Cooling system - ALL OK max 106*C and fans operating at 100% Cools down right away. Checked Fan Operation - 55%@101*C, 85% @ 104*C and 100% @ 105*C Vehicle did not exceed these temperatures with max load. Temperature recovered back to 99*C after fan operation while vehicle Stationary.
    • It really depends on your setup. Mine is 'accidently' more suited to revving higher. bigger cams, turbo etc. Plus my super long first takes donkey years to come onto boost, so if it will move my power band to the right, maybe i'll pass on this. i have a G45-1500 going on there soon which I suspect might make it more of a fat pig.
×
×
  • Create New...