Jump to content
SAU Community

Recommended Posts

Hi,

I'm currently looking to buy an R34 GTR and I'm just wondering what the differences are between a non-vspec, a vspec I and a vspec II. I've had a bit of a search around the site and the net and haven't been able to find this information. The only thing i've picked up so far is that v-specs have better suspension. Any feedback would be much appreciated.

Cheers

Ashley

Link to comment
https://www.sau.com.au/forums/topic/164043-differences-in-r34-gtr-versions/
Share on other sites

There is not a whole lot different between the V-spec/V-spec2's and non V-spec. V-spec's were made from 1999- October(ish) 2000 then V-spec 2's were released until production was ended in 2002. V-spec/V-spec 2's have a viscous LSD as opposed to mechanical. V-spec/Vspec 2's have harder suspension and underbody air diffusers front and rear. They also have intake and exhaust temperature displayed on the dash screen. There is no real difference between V-spec and V-spec 2 except for a bonnet vent on the v-spec 2. V-spec 2 was released to coincide with a minor facelift given to all GTR's from October 2000 on. The facelift included: black interior instead of grey, clear indicators, stainless steel pedals, larger rear brakes and a few different paint colours.

My father is currently selling his GTR - http://www.carsales.com.au/used-cars/priva...|1&trecs=21

There is no real difference between V-spec and V-spec 2 except for a bonnet vent on the v-spec 2. V-spec 2 was released to coincide with a minor facelift given to all GTR's from October 2000 on. The facelift included: black interior instead of grey, clear indicators, stainless steel pedals, larger rear brakes and a few different paint colours.

V-Spec II bonnet is carbon fibre with the NACA duct. V-Spec, and M-Spec bonnet is aluminium.

Series II BNR34 pedals are aluminium on rubber not stainless steel.

There are more differences as well regarding a couple of cost cutting decisions Nissan made when it came time for the series II BNR34. For example they deleted the rear wiper plastic under-cover in the series II, the radiator end tanks are plastic in the series II as well.

These kind of things are in keeping with Nissan's usual strategy of doing things cheaper later in a models lifecycle to fit improvements in such as the carbon fibre bonnet and slightly different rear rotors.

Also the V-Spec II suspension is stiffer than the V-Spec and M-Spec suspension. The M-Spec having probably the best suspension for street out of all the GTR's.

M-Spec also obviously has the exclusive colors and the leather interior making it overall the best pick of the bunch. Unforuntately for us it also commands a huge premium at auction in Japan . Usually over the 4.5million yen mark.

The best value if you're after a GTR is a V-Spec. The standard GTR's lack the agressive look of the V-Spec since they lack the second front lip. The missing rear diffuser kinda sucks too as they look much tougher from behind with it.

V-Spec II would be the next best in terms of value. You get a newer car but you pay a decent amount more for the privilege.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes to both! Yes to standard ECU and tune, but exhaust is aftermarket. Unsure on brand. Actually have it sitting in at my desk haha! I have to set it up on my laptop but this is a great next step, will do. So I generally try to shift before 4.5K RPM most times. I largely don't do a lot of high-rev driving, but I will take it up to red 1-2x a week max, as I know the occasional "Italian tune-up" is good for these cars.  Oh wow, is this way better than what I'm getting. Does this mean there's a good chance I have an issue?   Thanks for all the info so far guys.
    • Old Son, did you re-use the Holden ABS in the new shell or try a different module?
    • Yeah, nah. I had the actuator rod off it today. The arm will not move at all. Neither out, nor in. Yeah, you'd think so, but I've been thinking about that. Even when the actuator rod fell all the way off at the beginning of this saga, it would build more boost and faster in lower gears than it would in higher gears, and you'd think that that was the opposite of what should happen. But I strongly suspect that there is a thing with the gearing getting the revs to rise faster, that there must be some transient effect with the gas flow rate rising quickly, that you don't get with the more steady state case of the higher gears. Keep in mind - the gate is not shut in either of my weirdnesses. So things are not "normal". We normally think about a turbo spooling up (below the wastegate target) with the gate shut. I have all sorts of mental models running now where the gate is a little bit open, and having it stuck open allowing gas out while it should be going through the turbine has all sorts of weird effects (in these mental models). I'm thinking in the higher gears, the ex mani pressure builds to the point where enough gases spill out the wastegate to just prevent the pressure rising much more at all, or just creeping up, all the whole the revs are increasing and getting closer to the point where a gear shift becomes necessary.
    • Is it possibly wastegate actuator itself is sticking, or even the rod to flapper? Otherwise I reckon things are getting a bit rusty/worn   Also odd it won't boost in 3rd to 5th, but will in 1st, I'd expect the other way around with it slightly open as there's more time on your way to redline for it to spin up
    • Does anyone know ow what these two plugs are for and if they should be unplugged? Just put the dash back together and can't remember if these were plugged in before or unplugged! (Blue and white plugs) 🤦🏽‍♂️
×
×
  • Create New...