Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

might be worth checking the injector if in doubt switch it with another cylinder. Comp test it and see what happens!

yeah im hoping it might be injector or injector solders or something

but gotta drive it home! cant leave it in the work car park over night!

but of a thud thud clank coming from under the car but thinking its the exhaust hitting stuff because its running so rough

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3045332
Share on other sites

hey ed sorry for the simple q, but what are the signs that the engine has dropped a cylinder? would it be similar to an engine missing?

oh yeah.. got the coilpacks tues and went back to the old plugs and worked a charm, fixed my missfire.

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3045354
Share on other sites

It does sound like shes dropped a cylinder, The only thing you can do is comp test it and go from there really. Its not like an injector to just give way like that but it can happen.

If you have changed the plugs and switched coils etc its not lookin good. If you need help sourcing another engine or getting it fixed let me know. Got enough RB20 crap laying around to get it running again!

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3045364
Share on other sites

i did the injector wiring myself so ill give it a wiggle and see if it comes back to life, but im pretty sure i have dropped a cyl....

ill buy a comp tester from supercheap tonight and bring it back to work to test it...

reckon its safe to drive home through the cross city tunnel or will i just do more damage?

desperate for any help anyone can give!

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3045369
Share on other sites

wet and dry? dont i get some guage thing that i screw into the sparky hole and see what psi its got?

its just a 5min drive so hopefully she gets there!

i guess if it was something bottom end like bearings or what not i would dropped more cyls?

i know alot about cars but nothing about engine blow ups! never experienced one before

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3045402
Share on other sites

compression test it first.

stick a rag on the end of a screw driver and put it inside the spark plug hole, if it comes out clean then you're safe. if its got oil in it its time for a rebuild.

or just check the spark plug for oily shit all over it.

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3045413
Share on other sites

ok guys

bought a tester tonight, tested cyls 1 and 5 (problem cyl is 5) did a dry test i think its called and both read 150psi! thats a good thing isnt it! i still need to do a wet test...

checked spark yes, sparkies ok

im 65% leaning towards one of the injectors playing up, OR one of the injector resistors having a melt down seeing as it happened so fast...

the car is at work at the moment, can leave it there most of the weekend, so ill order the $25 resistors and go in with a multi meter and do the wet test...

phew glad she can hold some pressure!

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3046121
Share on other sites

I know someone not too far from you who can check your engine well and truly. All your cylinders will have the same comp readings, guaranteed...

...but the insides might look a bit mangled. His name starts with an 'H' and rhymes with 'vermin' :pwned:

Seriously though, hopefully it all turns out ok mate.

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3046155
Share on other sites

I know someone not too far from you who can check your engine well and truly. All your cylinders will have the same comp readings, guaranteed...

...but the insides might look a bit mangled. His name starts with an 'H' and rhymes with 'vermin' :pwned:

Seriously though, hopefully it all turns out ok mate.

how long have you been drinking for hahahahahaahahhah i totally didnt get that!!!

wont have much time to do the car tomorrow so saturday it is, just ordered new resistors so ive got a backup!

damn cars!

Link to comment
https://www.sau.com.au/forums/topic/164278-ohh-nooooo/#findComment-3046160
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I haven't....but a poorly made one would terrify me. Surely a good second hand one is the go, as they don't work hard and no-one wants to keep one after they are finished with it A big consideration would be the weight of the shell you are putting on it....is it a fully dressed chassis or just the body
    • Not stock. All remade. Mostly looks stock because the pipes run to and from the standard holes in the inner guard to get to the return flow FMIC. I'm not sure which question you're trying to ask, because it seems like "stock position" vs "stock position".
    • Hey, it's a GT-R, it's just as significant a moment as mine😁 It's not ideal when things are uncertain; I'm the type of person that always has a set plan for things in life so being unsure of this plan puts me in a weird place mentally.
    • Hows your intake piping? Are you still running stock? Having in the stock AFM position would mean, if the BOV was shut/venting out, it'd create the almost stalling kind of effect right // "the rich pulse behaviour" due to MAF thinking air is flowing ? But this would be better than having the bov in the stock position + MAF on/just before cross over piping right?
    • Essentially, yes. Although I wouldn't put the AFM on the crossover pipe. I'd want to put it into what amounts to the correct size tube, which is more easily done in the intercooler pipework. I bought a mount tube for card style AFM that replaces the stock AFM - although being a cheap AliExpress knockoff, it had no flange and I had to make and weld my own. But it is the same length and diameter as the stock RB AFM, goes on my airbox, etc etc. I don't have a sick enough rig to warrant anything different, and the swap will take 5 minutes (when I finally get around to it and the injectors & the dyno tune).
×
×
  • Create New...