Jump to content
SAU Community

Recommended Posts

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

a guy bought a 32 gtr at work

we thought it had some goodies but was basically stockish

it ran 10.9 on slicks

so its got at a minimum

some sort of low mount twins , we thought just n1s but who knows

remap

full exhaust

hd clutch (which has died since)

intake

injectors and pump

but nothing too crazy

i didnt believe it but it did run a 10

The best way to run a 10 in a GTR, is strip it of absolutely everything, and then chop the roof and boot off in an attempt to make it less than 1000kg. And that would cost you zilch :)

Does the $5k include the rebuild after you blow it up trying? I dont think it would count if you did a 10.99 with the car blowing up at the 401m mark.

But really why bother when you can do it in an old VK or something for $10k including the car :thumbsup: Like its 400m, does it really matter what you do it in? Its going to feel pretty much the same.

Can be done............

1-1 Used Big single Turbo$1700....including manifold

2-Power fc d jetro...installed and tuned.....$1700

3-Bosch fuel pump...$200

4-Second hand set of injectors...555...or...600....$450

5-Nitro...second hand...$350.....fitting $300

You will need to fit fuel pump....Turbo...injectors yourself.....

Leave the tuner to fit...d jetro and Nitro...

Total cost.....$4700......

You are going to run in the tens....but you will fry your clutch and maybe some other things.... :thumbsup:

The day that someone actually tries this with a GTR is the day they should have said GTR confiscated & replaced with something they are more deserving- like a Camira or a Gemimi . I'll second Omurru's comments but I guess that's part of the down-side of such a car becoming so "affordable" but then again for every GTR that gets trashed I guess that will eventually make the rest more valuable over time :thumbsup:

Having said that, it would be interesting to see someone to try this with a big WET nitrous system & a good progressive controller. That way you could run stock everything, incl ECU & injectors etc. Wind the CAS back a bit to knock some timing outa the entire Ign map for when the gas comes in, launch the car with 0% nitrous to be nice to the clutch, be gentle-ish with the gas map 'til you're into 3rd to lessen the chance of grenading the box, losing traction etc then get aggressive with the bottle & with a huge top-end rush I reckon the 10 is a big chance IF you don't pop the bottom-end.

WET Nitrous Kit

(With ALL the fruit) $2500

Progressive Controller $500

Sticky Micky's $500

WBO2 $500

Celebration/Commiseration

Party & Tow (If Req'd) $500

10/1 Bet to cover costs $500

DONE!!

Can be done............

1-1 Used Big single Turbo$1700....including manifold

2-Power fc d jetro...installed and tuned.....$1700

3-Bosch fuel pump...$200

4-Second hand set of injectors...555...or...600....$450

5-Nitro...second hand...$350.....fitting $300

You will need to fit fuel pump....Turbo...injectors yourself.....

Leave the tuner to fit...d jetro and Nitro...

Total cost.....$4700......

You are going to run in the tens....but you will fry your clutch and maybe some other things.... :thumbsup:

Tyres?

Clutch?

I think its definiately possible what if you cut of the roof, took off the bonnet/boot, removed all lights/AC/trim, took off all the guards and drove the stripped bare chassis with...

ECU-1000

2nd hand turbos-2000

fuel system-1500

tryes-500

you wouldn't be allowed to do an official run but anythings possible :P

Well weight is against you take out the seats, sound deading, angle grinder to the doors no back bar or side skirts and any think else thats not welded down.

JB clutch $1200

3 stage 150shot per stage NOS system

Why has no one done this stock Rb26 4-6k replacement value and you have just kill a good GTR. All so the Z tune could do it maybe with a tick of Nos

A nitrous kit a a few other things to get power down (tyres) will be under $5k all up in part cost.

It may or may not run the 10 in the short number of passes it will run before something important is broken into little peices.

I say invest the $5k for a few years and get more money.

Actually if you only have $5k in funds you can't afford to own a stock second hand GTR and race it. Second hand import GTRs cost an average of $2-3k per year to keep from being put off the road, if you drive it every day. The first few years usually break the unsuspecting hence they are frequently bought and sold, even on this forum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • That dirty voltage drop is the culprit I suspect 
    • i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
×
×
  • Create New...