Jump to content
SAU Community

Recommended Posts

i just started on my r32 wide body skyline just want 2 know what u think of it and maby some advice

i will b flairing the front aswell but not made the flairing tool yet

i havent found any rims yet as i need an offset of 130mm as it is 3 inch wider on each side

il stick some more pics up 2mo

post-29910-1176450913.jpg

post-29910-1176451099.jpg

post-29910-1176451203.jpg

Link to comment
https://www.sau.com.au/forums/topic/164423-what-u-think-r32-wide-body/
Share on other sites

no offence but the front bar intercooler hole is too big..looks like ur 32 jaws are dropped! And the side air ducts are too square...

thanks i l have a look at that the intercooler hole will prob stay the same but i can quite easily modify the side vents with some coving

anyway heres some pictures of the rear

post-29910-1176502976.jpg

post-29910-1176503043.jpg

post-29910-1176503088.jpg

is that fiberglass wide body kit????? if it is how much was it ????? lol i didint go with the wide fiber glass body as in mine oppoinion it didint looks good and the pannel beater siad that fiberglass to make it look smoother and puddy or bog as well after 12 month driveing, because of the road like bumps, shaskes and rattles it could crack so i went with GTR quarter pannels its getting wielder onto my GTST atm and i also got a front bumper like that looks awesome does it cant wait till mien is finnished i post my gtst once the pannels are on and photos of my befor and after pics which my friend took ^^....... i could of sold u my fiberglass wide body lolz had it for sale still are ^^ i got a fiberglass bonnet if you want for that car needs some work i sell it for ya for cheap :D

is that fiberglass wide body kit????? if it is how much was it ????? lol i didint go with the wide fiber glass body as in mine oppoinion it didint looks good and the pannel beater siad that fiberglass to make it look smoother and puddy or bog as well after 12 month driveing, because of the road like bumps, shaskes and rattles it could crack so i went with GTR quarter pannels its getting wielder onto my GTST atm and i also got a front bumper like that looks awesome does it cant wait till mien is finnished i post my gtst once the pannels are on and photos of my befor and after pics which my friend took ^^....... i could of sold u my fiberglass wide body lolz had it for sale still are ^^ i got a fiberglass bonnet if you want for that car needs some work i sell it for ya for cheap :D

Hey dude, its spelt "SAID" not "SIAD", you've spelt it wrongly in 4 of your posts! :laughing-smiley-014:

is that fiberglass wide body kit????? if it is how much was it ????? lol i didint go with the wide fiber glass body as in mine oppoinion it didint looks good and the pannel beater siad that fiberglass to make it look smoother and puddy or bog as well after 12 month driveing, because of the road like bumps, shaskes and rattles it could crack so i went with GTR quarter pannels its getting wielder onto my GTST atm and i also got a front bumper like that looks awesome does it cant wait till mien is finnished i post my gtst once the pannels are on and photos of my befor and after pics which my friend took ^^....... i could of sold u my fiberglass wide body lolz had it for sale still are ^^ i got a fiberglass bonnet if you want for that car needs some work i sell it for ya for cheap :P

yea its fiberglass its home made out of timber moulds nothing was bought n i did all the work and im going to stick with that theme not 2 bad 4 an 18 year old. i have a bonnet ready and waitin 4 me 2 put some time into n get it ready. i also want 2 have a 1 off car im also going to the extent of building an rb24det as they are very rare

Hey dude, its spelt "SAID" not "SIAD", you've spelt it wrongly in 4 of your posts! :laughing-smiley-014:

lol bah who cares really you understood what i mean, lol stop being a high school teacher LOLZ

yeah Rb24det, i never herd of a Rb24det must be rare lol

Edited by BRUNSKIGTST

looks interesting, the primer and sh!t makes it look piss poor. With the flared front gaurds and a different bonnet it will suit it.

Im not to sure on the front bumper the centre looks to small. Is the an FMIC there?

Ive never seen a rb20det, i thought the max i could be bored to was a to 2.3? Dont know...just drop a 25 into it.

the 24 is built with a 25 block and pistons with 2litre cons and crank

this givves the engine a very revvy nature like the 20 but the tourque of the 25

24 s only came in single cam factory and were only sold in the US so its going 2 be a complete custom build

i havent mounted the intercooler yet it just mesh at the mo

That's a pretty ambitious project you're undertaking! Good luck with it.

Here's my R32 with a widebody kit. The custom gas cap is where most of the work is at.

And you're right about the spacers. Need em big to get the wheels to sit flush.

Blue2.jpg

Blue4.jpg

thats awesome! one of the nicest I've seen I think...good work!

that is mint how did u du the fuel flap n are they gtr front qarters

Thanks for the comments.

There's ~2 1/2" spacers to bring out the cap. Then alot of bending to have it sit flush with the new curves of the body.

No, the front fenders aren't GTRs. The front and rears are from the same kit. (I forget the name :P it might be the same as Felixy69's) It's wider than a GTR in both front and rear!

The car always gets mistaken for one still. hehe

Edited by 604R32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Not R7R. Meant to type R&R, obviously enough.
    • Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
×
×
  • Create New...