Jump to content
SAU Community

Recommended Posts

i just started on my r32 wide body skyline just want 2 know what u think of it and maby some advice

i will b flairing the front aswell but not made the flairing tool yet

i havent found any rims yet as i need an offset of 130mm as it is 3 inch wider on each side

il stick some more pics up 2mo

post-29910-1176450913.jpg

post-29910-1176451099.jpg

post-29910-1176451203.jpg

Link to comment
https://www.sau.com.au/forums/topic/164423-what-u-think-r32-wide-body/
Share on other sites

no offence but the front bar intercooler hole is too big..looks like ur 32 jaws are dropped! And the side air ducts are too square...

thanks i l have a look at that the intercooler hole will prob stay the same but i can quite easily modify the side vents with some coving

anyway heres some pictures of the rear

post-29910-1176502976.jpg

post-29910-1176503043.jpg

post-29910-1176503088.jpg

is that fiberglass wide body kit????? if it is how much was it ????? lol i didint go with the wide fiber glass body as in mine oppoinion it didint looks good and the pannel beater siad that fiberglass to make it look smoother and puddy or bog as well after 12 month driveing, because of the road like bumps, shaskes and rattles it could crack so i went with GTR quarter pannels its getting wielder onto my GTST atm and i also got a front bumper like that looks awesome does it cant wait till mien is finnished i post my gtst once the pannels are on and photos of my befor and after pics which my friend took ^^....... i could of sold u my fiberglass wide body lolz had it for sale still are ^^ i got a fiberglass bonnet if you want for that car needs some work i sell it for ya for cheap :D

is that fiberglass wide body kit????? if it is how much was it ????? lol i didint go with the wide fiber glass body as in mine oppoinion it didint looks good and the pannel beater siad that fiberglass to make it look smoother and puddy or bog as well after 12 month driveing, because of the road like bumps, shaskes and rattles it could crack so i went with GTR quarter pannels its getting wielder onto my GTST atm and i also got a front bumper like that looks awesome does it cant wait till mien is finnished i post my gtst once the pannels are on and photos of my befor and after pics which my friend took ^^....... i could of sold u my fiberglass wide body lolz had it for sale still are ^^ i got a fiberglass bonnet if you want for that car needs some work i sell it for ya for cheap :D

Hey dude, its spelt "SAID" not "SIAD", you've spelt it wrongly in 4 of your posts! :laughing-smiley-014:

is that fiberglass wide body kit????? if it is how much was it ????? lol i didint go with the wide fiber glass body as in mine oppoinion it didint looks good and the pannel beater siad that fiberglass to make it look smoother and puddy or bog as well after 12 month driveing, because of the road like bumps, shaskes and rattles it could crack so i went with GTR quarter pannels its getting wielder onto my GTST atm and i also got a front bumper like that looks awesome does it cant wait till mien is finnished i post my gtst once the pannels are on and photos of my befor and after pics which my friend took ^^....... i could of sold u my fiberglass wide body lolz had it for sale still are ^^ i got a fiberglass bonnet if you want for that car needs some work i sell it for ya for cheap :P

yea its fiberglass its home made out of timber moulds nothing was bought n i did all the work and im going to stick with that theme not 2 bad 4 an 18 year old. i have a bonnet ready and waitin 4 me 2 put some time into n get it ready. i also want 2 have a 1 off car im also going to the extent of building an rb24det as they are very rare

Hey dude, its spelt "SAID" not "SIAD", you've spelt it wrongly in 4 of your posts! :laughing-smiley-014:

lol bah who cares really you understood what i mean, lol stop being a high school teacher LOLZ

yeah Rb24det, i never herd of a Rb24det must be rare lol

Edited by BRUNSKIGTST

looks interesting, the primer and sh!t makes it look piss poor. With the flared front gaurds and a different bonnet it will suit it.

Im not to sure on the front bumper the centre looks to small. Is the an FMIC there?

Ive never seen a rb20det, i thought the max i could be bored to was a to 2.3? Dont know...just drop a 25 into it.

the 24 is built with a 25 block and pistons with 2litre cons and crank

this givves the engine a very revvy nature like the 20 but the tourque of the 25

24 s only came in single cam factory and were only sold in the US so its going 2 be a complete custom build

i havent mounted the intercooler yet it just mesh at the mo

That's a pretty ambitious project you're undertaking! Good luck with it.

Here's my R32 with a widebody kit. The custom gas cap is where most of the work is at.

And you're right about the spacers. Need em big to get the wheels to sit flush.

Blue2.jpg

Blue4.jpg

thats awesome! one of the nicest I've seen I think...good work!

that is mint how did u du the fuel flap n are they gtr front qarters

Thanks for the comments.

There's ~2 1/2" spacers to bring out the cap. Then alot of bending to have it sit flush with the new curves of the body.

No, the front fenders aren't GTRs. The front and rears are from the same kit. (I forget the name :P it might be the same as Felixy69's) It's wider than a GTR in both front and rear!

The car always gets mistaken for one still. hehe

Edited by 604R32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it's for a SR20, make sure it's not the American Poncams, might as well call them Poocams. Had a set in a friend's car, all scuffed up after a few track days. Like the metallurgy Tomei USA used is junk. Went back to JDM OG Tomei Poncams, no issues till now.   Tomei USA is not the real OG Tomei.   Random rant over, fk the US of A, bunch of c u n t s. 
    • Most of the industry in North America either runs on Siemens or Allen Bradley. I have two redundant S7-1500's on my desk right next to me for simulation. Siemens has been losing ground though since Stuxnet, as cybersecurity is a big thing. In my line of work that is federally regulated, you must by law have a cybersecurity management program in place and its audited and inspected every so often.  I work with Emerson PLC's daily (RX3i's) and have done large biogas/refinery projects with their DCS's. Their PLC's are somewhat OK minus the way they do PLC redundancy (You have to download on both PLC's separately every time you make a change )  As for their DCS's... you'll be limited financially first before anything else stops you. Costs are exorbiant at roughly 10x what it would cost you to do with any other system (e.g AB PAC).  1990's, those suckers are brand new haha! Kraft-Heinz (An old client when I use to work for an ESP) still runs Siemens TI505 PLC's from the mid 80's. Ohh how I don't miss working with those... you could only do a certain number of online downloads until it's "Change" buffer would be full and you would then need to go offline to do a full download. There was no warning of when this was coming up and it generally would happen when you would go in at 2am to make changes before production -_-.     
    • Unfortunately, not only is that not the case, one of the main "Selling points" of safety over comms is they clearly state in writing that there's no need to segregate safety networks from non-safety networks. It always gets intermingled with everything else on an ICS/OT network. 
    • Hello. I have an a31 cefiro but since I am in Turkey we have a CA20S engine. I did some research. Then I found that I can swap with a ca18 but when I heard that it has the similar substructure as the s13. I thought I can swap with an sr20 because the sr20 was used with the s13. So can I easily swap the sr20 on my cefiro or is it difficult? 
×
×
  • Create New...