Tomei Cam Identification, Marking On Cams?

[GTR1993]

Just need a bit of help, the GTR i bought a while ago was lacking power. I slapped it on the dyno swung the cams quickly and got some much better results but midrange is still lacking. Im going to pull the rockers and dial in the cams to 110 and 115 lobe centres like tomei specify to start at but i would like to know what markings are on tomei cams so i know what ones i have? Im pretty sure they are tomei from the recipts i have.

Cheers

Edited April 17, 2007 by GTR1993

[T04GTR]

all tomie cams, albiet poncan type a or procams with 11.5mm lift all have the same STARTING lobe centre recomendation.

[GTR1993]

Do you know if they have tomei written on them? i know the sr ones do but the ones in my motor dont seem to have anything written on them

[GTR1993]

i pulled the rocker again and on the end of the cam is A2691N i looked on here and someone was selling the poncams with those numbers, i assume type A 260 deg duration and 9.15mm lift

[Jase]

i pulled the rocker again and on the end of the cam is A2691N i looked on here and someone was selling the poncams with those numbers, i assume type A 260 deg duration and 9.15mm lift

same the one I looked at (not in the car yet) have A2691N stamped on the end

couldn't see tomei on it

JC