Jump to content
SAU Community

Recommended Posts

Quote:

the theory is that with the cruise activated you not doing as much when driving such as looking at the speedo all the time to check your speed cos with the cruise you know its what you set it at hence no looking up and down every few seconds.....

As a truck driver I know that it makes it a hell of a lot easier to do the long trips!!!

Reading stuff like this makes my blood boil!!!! As a truck driver I know you MUST check everything all the time.

There are thousands of "experts" who continually remind us that we must concentrate when driving, no eating, no mobiles, no radio, no smoking... the list goes on and on. Yet the concentration of our driving public is getting worse. The more aids we supply, it seems the less concentration of the driver.

OK when I started driving, we had trailer brakes and truck brakes(no foot/hand combination), 24-speed quad box(2-gearsticks no synchro), 250max Hp, even had a mechanical hand on the door. Yet with all this action in the cab, we could dodge potholes while seeking out the smoothest part of the road ahead, watch the load, check mirrors.....

Now at 57 I can go outside, walk my excavator and take a swipe with the bucket while slewing. Not superman, just practice.

Education is what's needed, not gimmicks.

Some info: Cruise control can't see that big hill coming up. So if you wait until it drops into its operating range, you're down a gear before you know it. You MUST help it by booting it into the hills.

Sure it's great on the flat, but all this bulltwang about better economy is only from drivers who can't maintain a constant speed.

We've all seen them, 80 on the highway, 120 on the passing lane, I guess they need all the help they can get.

Some info: Cruise control can't see that big hill coming up. So if you wait until it drops into its operating range, you're down a gear before you know it. You MUST help it by booting it into the hills.

or you need a more powerful car.

I don't need to help the cruise control in my r33 by booting it into hills, it maintains speed just fine, maybe gains a bit down hills, but not much.

I believe it improves safety as when i have the cruise it takes a lot longer for me to get fatigued, which in the end leads to lapses in concentration.

It should not be used on country back roads when things can pop out at you, but on a dual carriageway freeway i dont see negatives to using it.

Quote:

or you need a more powerful car.

Too true. But seriously, get in an ordinary como or a falc and let them run at a hill with cruise on. At the top of the hill, check where the accelerator is. She'll be flat to the floor. That's not economical driving.

I get so sick of following shit boxes on cruise. You'll see them drop back to 90, then slowly pick back up to 100, then roll down the other side with the brakes on. You can really notice the stink from falc's and camry's running megarich.

All this in an energy conscious age.

Like I said, great on the flat but use your brains at the hills.

Quote:

or you need a more powerful car.

Too true. But seriously, get in an ordinary como or a falc and let them run at a hill with cruise on. At the top of the hill, check where the accelerator is. She'll be flat to the floor. That's not economical driving.

I get so sick of following shit boxes on cruise. You'll see them drop back to 90, then slowly pick back up to 100, then roll down the other side with the brakes on. You can really notice the stink from falc's and camry's running megarich.

All this in an energy conscious age.

Like I said, great on the flat but use your brains at the hills.

Dude dont use your cruise control in 60 KM area and or around sharp bends and hills and you will never have that problem. Keep it to the even level freeway where smooth, high speed, long distance driving is needed..

If you have the cruise set at 110kmph on the freeway its illegal to speed up fo the hill so you are still doing your 110 in your underpowered falcon or commodore at the top!!!

Dunno what truck your driving but mine tells me when something goes wrong......We are out of the Stoneage now.

If you were to drive a car without cuise and hit the same hill that the cruise control supplied full throttle for you too would have to plant your foot all the way up... but thats after you realized you were doing 90k's.

After a few yrs in a Aeromax with no cruise and 18speed RRanger then driving my new Sterling with 18speed auto and Cruise I feel much better after a days/nights driving.

Anything that can make my job easier is a bonus.... means Im more alert because I am not a fatigued.....IN MY OPINION!!!!!!!!!!!!!!!!!

Edited by Turbo Dave

I think cruise control is great when a lot of highway driving (i.e. interstate), but if you're just driving to work on the local freeway, it's probably not so safe. People pop out from seemingly nowhere, change 4 lanes at a time, talk on their mobile and break suddenly.

Also, it's not efficient on the windy or undulating roads. The first one's obvious (lots of speed changes required), the second one is that I find the cruise control system is reactive rather than proactive. A human will see a hill ahead and instinctively step on the gas a bit before the hill and likewise, ease off when nearing the top. The cruise control can't predict this, so it tends to struggle up the hill and overshoot at the top. This is assuming that generally you're in top gear (5th or 6th) on the highway, and has the least power/torque in this gear.

It's a great "nice to have" for those long trips to NSW or whatever -- who says that sports / hi performance cars can't drive long distances? It allows you to relax a bit and not have to worry about the speed as much. But still no substitute for being alert and concentrating.

Too true. But seriously, get in an ordinary como or a falc and let them run at a hill with cruise on. At the top of the hill, check where the accelerator is. She'll be flat to the floor. That's not economical driving.

I get so sick of following shit boxes on cruise. You'll see them drop back to 90, then slowly pick back up to 100, then roll down the other side with the brakes on. You can really notice the stink from falc's and camry's running megarich.

All this in an energy conscious age.

Like I said, great on the flat but use your brains at the hills.

i had it on my old vx commodore. hills don't suddenly go from flat to hill. there is usually a transition period. if you pay attention to the accelerator (rest your foot on it) you will see that as the hill gets steeper the accelerator goes down further. it doesn't just stay where it was then go "oh shit" and floor it straight away. it does the same thing you would if you were staying the same speed without breaking the speed limit.

how do they control the speed? i.e. what are they connected to?

most work off the ecu's speed sensor, the tps and they have a second throttle cable hooked up to the throttle body that goes into a little motor to pull on the cable to apply or let off the throttle.

Quote:

A human will see a hill ahead and instinctively step on the gas a bit before the hill and likewise, ease off when nearing the top. The cruise control can't predict this, so it tends to struggle up the hill and overshoot at the top.

I thought that's exactly what I just said.

Nobody drives at 60 with cruise on CCCP. Well maybe my dad but he loves his cruise.

Mad 082 I know how cruise control works and how you can alter your ramp rates etc.etc But if you don't have sufficient power to start with, as in your VX, you'll find at the top of the hill the acelerator will be right down. Check your torque curve on the VX. At cruising speed, it will be doing around 1800-2000rpm. Probably making about 50rwkw. Only takes the aircon to cut in and you've lost 5KW. Whereas if you'd dropped back a gear at the start, you'd be in peak torque range and the car would eat the hill.

As for the modern trucky Turbo Dave, keep at it. You've got a lot of miles to catch up.

I think cruise control should be banned on cars i think it causes crashes

You should write articles for the police force.

As for using less fuel, I found it the opposite in both my commodore, and my dads commodore, was adding around 1 - 2L of fuel required per 100km.

As for not getting done. Ever looked down whilst coming down a hill? I found my car, and also my fathers, loved to just hold the throttle open coming down a hill till your doing around 10-15km/h over the limit, then it'd close the throttle SOME, but not all the way.

My uncle also got done for speeding on Cruise. Car set at 100km/h, copper pulled him at 112km/h going UP a hill (Car decided it had slowed a bit, needed more power, so it changed down a gear *auto* and accelerated, to above the limit)

I've had it in my old car, and I did use it, but I had to be ever so vigilant, now that the skyline doesn't have it, I get in a car with CC and don't even use it.

Also, you shouldn't use cruise in the wet either.

Edited by MBS206

I'm a big fan of Cruise. I use cruise everywhere, including on 50kph streets. I hate getting fines (not that I've had one in the last 5 years) and so use the CC as a speed control device. Accelerate to speed limit, activate cruise.

It's easy, it's what it's there for and it works. My wife's VW GTI had an instantaneous litres/100k readout and on a flat surface the thing is rock solid. Undulating, I've never seen the cruise be more than a few kph behind set speed going up a hill, and I've NEVER seen it over the limit anywhere other than a a very steep hill, and at a very steep hill, even if you don't have cruise, you are going to accelerate.

I think the argument about things jumping out at you on suburban roads is a little misguided. In these days of constant speed watching, it could be said that cruise is a safety device. The less time I spent looking down at my speedo, the more time I'm looking at the road ready for those things that "Jump out at me"

I hate not having CC in my R34, especially on the trip to Deca when you want to relax and constantly be speed checking. I have done a LOT of kilometers for work in cars both with and without cruise. I'm much more alert and less tired after a few hours on cruise than not. This makes me a safer driver on cruise.

I had cruise control fitted to my stagea. I am cruise control freak. (most people think just control freak!). I luv it. Not only for trips but also around town. I even use it sometimes in the school zones (40kph). You just never know when Mr Plod is going to be pointing a radar gun at you. Oh I turn it off for drag racing though!

Oh yeah $640 at Cruisewest. Nice unit, on the wheel, Looks like Nissan fitted it.

Edited by Appealing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can perhaps see how the R33 appreciators would think so.  
    • Thanks, I removed the fuse and the relay from the car and made my own circuit with them to test them with a test bulb.  I will look for the wiring diagram and go from there.
    • Jdm DC2R is also nice for a FF car compared to the regular hatches of the time.
    • Now that the break-in period for both clutch and transmission is nearly over I'd like to give some tips before I forget about everything that happened, also for anyone searching up how to do this job in the future: You will need at least 6 ton jack stands at full extension. I would go as far as to say maybe consider 12 ton jack stands because the height of the transmission + the Harbor Freight hydraulic platform-style transmission jack was enough that it was an absolute PITA getting the transmission out from under the car and back in. The top edge of the bellhousing wants to contact the subframe and oil pan and if you're doing this on the floor forget about trying to lift this transmission off the ground and onto a transmission jack from under the car. Also do not try to use a scissor jack transmission lift. You have to rotate the damn thing in-place on the transmission jack which is hard enough with an adjustable platform and a transmission cradle that will mostly keep the transmission from rolling off the jack but on a scissor lift with a tiny non-adjustable platform? Forget it. Use penetrating oil on the driveshaft bolts. I highly recommend getting a thin 6 point combination (box end + open end) wrench for both the rear driveshaft and front driveshaft and a wrench extension. These bolts are on tight with very little space to work with and those two things together made a massive difference. Even a high torque impact wrench is just the wrong tool for the job here and didn't do what I needed it to do. If your starter bolts aren't seized in place for whatever reason you can in fact snake in a 3/8 inch ratchet + 6 point standard chrome socket up in there and "just" remove the bolts for the starter. Or at least I could. It is entirely by feel, you can barely fit it in, you can barely turn the stupid ratchet, but it is possible. Pull the front pipe/downpipe before you attempt to remove the transmission. In theory you don't have to, in practice just do it.  When pulling the transmission on the way out you don't have to undo all the bolts holding the rear driveshaft to the chassis like the center support bearing and the rear tunnel reinforcement bar but putting the transmission back in I highly recommend doing this because it will let you raise the transmission without constantly dealing with the driveshaft interfering in one way or another. I undid the bottom of the engine mount but I honestly don't know that it helped anything. If you do this make sure you put a towel on the back of the valve cover to keep the engine from smashing all the pipes on the firewall. Once the transmission has been pulled back far enough to clear the dowels you need to twist it in place clockwise if you're sitting behind the transmission. This will rotate the starter down towards the ground. The starter bump seems like it might clear if you twist the transmission the other way but it definitely won't. I have scraped the shit out of my transmission tunnel trying so learn from my mistake. You will need a center punch and an appropriate size drill bit and screw to pull the rear main seal. Then use vice grips and preferably a slide hammer attachment for those vice grips to yank the seal out. Do not let the drill or screw contact any part of the crank and clean the engine carefully after removing the seal to avoid getting metal fragments into the engine. I used a Slide Hammer and Bearing Puller Set, 5 Piece from Harbor Freight to pull the old pilot bearing. The "wet paper towel" trick sucked and just got dirty clutch water everywhere. Buy the tool or borrow it from a friend and save yourself the pain. It comes right out. Mine was very worn compared to the new one and it was starting to show cracks. Soak it in engine oil for a day in case yours has lost all of the oil to the plastic bag it comes in. You may be tempted to get the Nismo aftermarket pilot bearing but local mechanics have told me that they fail prematurely and if they do fail they do far more damage than a failed OEM pilot bushing. I mentioned this before but the Super Coppermix Twin clutch friction disks are in fact directional. The subtle coning of the fingers in both cases should be facing towards the center of the hub. So the coning on the rearmost disk closest to the pressure plate should go towards the engine, and the one closest to the flywheel should be flipped the other way. Otherwise when you torque down the pressure plate it will be warped and if you attempt to drive it like this it will make a very nasty grinding noise. Also, there is in fact an orientation to the washers for the pressure plate if you don't want to damage the anodizing. Rounded side of the washer faces the pressure plate. The flat side faces the bolt head. Pulling the transmission from the transfer case you need to be extremely careful with the shift cover plate. This part is discontinued. Try your best to avoid damaging the mating surfaces or breaking the pry points. I used a dead blow rubber hammer after removing the bolts to smack it sideways to slide it off the RTV the previous mechanic applied. I recommend using gasket dressing on the OEM paper gasket to try and keep the ATF from leaking out of that surface which seems to be a perpetual problem. Undoing the shifter rod end is an absolute PITA. Get a set of roll pin punches. Those are mandatory for this. Also I strongly, strongly recommend getting a palm nailer that will fit your roll pin punch. Also, put a clean (emphasis on clean) towel wrapped around the back end of the roll pin to keep it from shooting into the transfer case so you can spend a good hour or two with a magnet on a stick getting it out. Do not damage the shifter rod end either because those are discontinued as well. Do not use aftermarket flywheel bolts. Or if you do, make sure they are exactly the same dimensions as OEM before you go to install them. I have seen people mention that they got the wrong bolts and it meant having to do the job again. High torque impact wrench makes removal easy. I used some combination of a pry bar and flathead screwdriver to keep the flywheel from turning but consider just buying a proper flywheel lock instead. Just buy the OS Giken clutch alignment tool from RHDJapan. I hated the plastic alignment tool and you will never be confident this thing will work as intended. Don't forget to install the Nismo provided clutch fork boot. Otherwise it will make unearthly noises when you press the clutch pedal as it says on the little installation sheet in Japanese. Also, on both initial disassembly and assembly you must follow torque sequence for the pressure plate bolts. For some reason the Nismo directions tell you to put in the smaller 3 bolts last. I would not do this. Fully insert and thread those bolts to the end first, then tighten the other larger pressure plate bolts according to torque sequence. Then at the end you can also torque these 3 smaller bolts. Doing it the other way can cause these bolts to bind and the whole thing won't fit as it should. Hope this helps someone out there.
×
×
  • Create New...