Jump to content
SAU Community

Recommended Posts

Hey guys/girls

I require any input that you guys/girls can offer me.

Vehicle details:

r32 gts4-t

manual

turbosmart boost controller (Boost Tee)

3inch exhaust

FMIC

stock turbo

12 psi

dump pile

2 x BOV - i. after market - ii. stock (Weird previous onwer)

I have recently converted my r32 gts40t from auto to man (this was performed at GT auto garage) with a new exedy clutch and gt-r gearbox and after a good work out..... my baby started heistating 4000 rpm so as i have read on the forums here at the SAU website it could be hair crack in the coilpacks.

SO I gluing them with arodite and performed a compression test and in the process smashed the ignitor loom plugs (where it plugs into the coilpack) so i got a second hand loom from STZ automative.

Got back home put the new loom in and what do u know misfire on idle and load. After as for a mates help (he has a r31 with a rb20det) we swapped the ignitors than tried the loom. Ignitor didn't help. Loom resulted in no misfire at idle so we jumped in and went for a spin..... on load stall. So i thought maybe sparks / coilpacks........... Got new SP coilpacks, NGK iridium spark plugs, regap.

So after inspecting the loom that i got from STZ i found that the guy had given me a rb26 loom. So i returned it. Got a second rb20det loom and changed fuel filter.

Decided to send the car to GT auto garage car didn't mis for them heistated still. I asked for a new walbro pump to be installed, plugs to be regapped, SP coils to be installed.... 50 metres down the road STALL at 40 kms..... steering heavy "battery light comes up" could it be an alternator (&%*$ dying?

Currently heistating over 5000 rpm and stalling randomly and running RIch.

Well any help would be AWESOME

I have tried:

1. New plugs

2. swapped loom, ignitor for another rb20det

3. cleaned and resolder AFM pins

4. New SP coilpacks

5. New fuel filter

6. New fuel pump

7. checked for splits in Intercooler piling

Possbility i have thought of or read from the forum:

1. plastic from the plug has fallen into a cynlinder during compression test

2. alternator is F*&ked - i will find a friend with a multi meter

3. CAS

4. ACC

5. ECU in limp mode

Help........... would be awesome or even ways to test what it could be

I might even just RIPP THE 20 out and put in a 25 or 26 when i can afford it :P

Edited by RipNGrip

Update: Haha i will reply to myself! :closedeyes:

AFM soldered and cleaned

cleaned TPS plug

checked for leaks

occasional missing on idle! Revs fairly freely and doesn't stall on release (drops to low revs)

Intermittently stall? (not completely sure - battery light comes on engine sounds like it cuts and battery light goes off) but i charged the battery (battery less than 12 months old) today and tightened some of the connections

i'm not too sure if youve done it already? aac valve. my rb20 would stall at every bloody intersection and traffic lights

that i possibly stopped at and towards the end even when i slowed down to minimal revs.

i cleaned mine and it was like a totally new car. also adjusted the idles and its a dream

also when my afm went i couldn't get any power over about 3 grand. every time i took it to mechanics it ran fine.

theyre my experiences with similar problems under any sort of load.

hopefulyy it helps somewhat.

Hey mate have u actually tried using a different afm altogether? i have the same problem as you i resoldered my afm and it only temporarily fixed the prob i tried using a diff one and problem solved.

Hope that helps

Thanks guys,

I will try and clean the AAC valve today and tomorrow and let u konw how it goes. - i think there is a DIY on this site some where just need the carby cleaner and the gasket seal.

I haven't tried a diff AFM only have one mate who has a skyline! i am a newbie to the booster club! :closedeyes:

Thanks guys

NIZ-26T - i have a K+N pod and it just been cleaned!

Cheers

Just got the carby cleaner and gasket goop so i will see how it goes.

CLEANED and no difference still misses on idle (not like a full miss more like a half miss or a short cut)

Edited by RipNGrip

BUMP

Ok update, i have done some more research on this website however i haven't had time to do much more on the car. I regapped down to .8 mm the mechanic just put them in (running boost). Starts start up..... idles fine while still in "choke" i don't know what skylines do but it revs higher and richer.... than gets warm and starts to half miss than full miss......

going to check fuel pressure and check plusitility

going to check air regulator

any thoughts anyone?

Yeh i have two BOV and i have been reading about how it can mes up idle... How do i remove and disable my atmo BOV..... i have two and the atmo sits on the intercooler piling in the corner behind the front left area of my front spoiler..

maybe remove the vaccum piling to it????

Update:

I have checked that all 6 injectors are operating. 6 = all good. Cleaned the AAC no miss on idle but it gets worse as it warms up and on any sort of load...........

thinking possible AFM or aftermarket BOV..

How do u remove/disable an aftermarket BOV that is attached to my I/C piling

Well, i got really drunk on friday so saturday was recovery. Only looked at the car for a bit on sunday. I also downloaded the r32 engine manual (it is quite helpful - answer those a few questions on how to do diagnostics). I got a multimeter and some fuel just so i could have a crack at it for a bit. It seems that the problem gets worse as the car warms up..... it even starts to miss at idle if the car is warm.

So far:

1. placed screw driver on all 6 injectors (click, click, click) come from all of them - so they are pulsing

2. cleaned the AAC valve - it was really really dirty.

3. gapped down to .8mm (iridum plugs - i am having doubts about these plugs too)

4. resoldered the AFM and performed a DIY test which involved 12v battery, fan and multimeter - .5 volts fan didn't make a difference in the voltage so i am wondering if it wasn't powerful enough a fan or my AFM is BONED. I am leaning toward a AFM currently considering it warms up and starts missing on load/on idle. if i unplug the AFM plug the car just runs rich (light black smoke coming out the back) and sorta limps.

possbles:

1. replace afm with a mates

2. clean air regulator

3. BUY more copper plugs with higher heat ranges - grrrrrrrrrr irdiums aren't CHEAP

4. send it back to the mechanic

5. POUR PETROLLLLL on the RB20DET and smoke a cig next to it

6. crank the BOOST and try and destory the car

7. REPLACE WITH RB25 or RB26 after tax time.......... :) dont'[ have that much money for half cut and conversion

Well..... HOpefull i have found the soultion and i will post it for future misfire/stalling/heistating skyline drivers later...

Ran diag mode.

Code 54 = Auto gearbox d/c > auto to man conversion :( - HD exedy

Code 12 = AFM ......... HOPEFULLY found the source of my problems

p.s addition problem which i think worked towards to stalling was a split intercooler piling!

Anyways trying to find an jap auto wrecker with a AFM and i will confirm diagnosis!

Swapped ignitor with working rb20det... no deal! It seems to spit out some small black clumps (feel slightly wet) from the exhaust and begining to think it maybe a head gasket leak which comes to life when the engine warms up! HOwever maybe i should just bring it to a mechanic which specialize in rb20 skylines!

any recommendations guys?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • And at over $2 per litre I'm starting to consider setting up a corn mash still and converting over to alcohol and running mine on it !  Up side of that is it all doesn't have to go into the car ! Win win !
    • H2 (for cars) will never happen. It's not reasonable for any number of reasons. It's also not reasonable for almost all of the industrial uses that the fanbois say that it will be used for, again for a large number of reasons. There are some cases where it will be good. But, even those will be massively hampered by the economics. The only way that H2 can be economic is if we somehow manage to get from where we are to the other side of the economic-valley-of-death in which no-one can operate. You need there to be sufficient renewable generated electricity to be available so that it is effectively free. Once you are there, you can do whatever the hell you want and hang the efficiency. But until you get there, the ever diminishing value of electricity makes it harder and harder to encourage businesses to build the new generation capacity, and they will simply stop investing in generation projects. (I kinda think there needs to be just government money spent on building the required capacity in a non-commercial way, similar to how the first fossil fueled grids were built, as national-government owned utilities. And probably some nuclear in there to start. But this all should have started 10-15 years ago to avoid the chasm of death that we face right now). Synth fuels will be much more likely, but will only occur is there is at least some renewable H2 production, because you need H2 to do it. And you need stacks of free (or at least extraordinarily cheap) energy because assembling molecules back into fuels is exactly the opposite process to burning the fuel, and the reason we burn fuels is because there is so much energy squeezed into each molecule. So you're somewhat subject to the same economic valley of death problem as above anyway. That is unless people are willing to pay the current equivalent of $5 or $6 per litre of petrol-ish liquid fuels. Can you imagine it? The squealing at $2 now is bad enough.
    • This is so cool. Get a dashcam that records audio and hopefully you'll catch it.  Maybe there's a brand or some kind of markings on the back ? Are the pics hand drawn? I love it so much.
    • Hahaha yep, point(s) taken. I just like seeing different things and an EV in an R32 is pretty different. I'm not on the EV band wagon, I'm waiting for synthetic fuels or hydrogen personally. 
×
×
  • Create New...