Jump to content
SAU Community

Recommended Posts

Hi all. Very soon now I will be getting my 3" turbo back exhaust.

I was just reading through the meggala site and noticed that the car will run really rich once this mod is done.

What Im asking is it then necessary to get one of these SAFC to control this richness or is there another way. Does it actually cause any engine damage?

I will eventually get a SAFC but prob not for a year.

Link to comment
https://www.sau.com.au/forums/topic/16458-safc/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

So it will be alright getting the exhaust done without the SAFC although one would obviously be beneficial?

I have only seen the APEXI SAFC II's that seem to sell for $500-700.

Are there any cheaper SAFC to choose from and what are the costs associated with installing one of these.

Also, once I get the exhaust, would it be beneficial to get a dyno tune or just resest the ECU

Link to comment
https://www.sau.com.au/forums/topic/16458-safc/#findComment-338660
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Need this stuff gone, prices reduced. Series 1 RB25DET 5 speed gearbox, push type, 1st and 2nd gear syncros worn, may need bearings. Comes with quick shift, Tomei gear knob, release fork, bearing carrier, master and slave cylinder. $480. Cusco Super Single clutch,assembly, 225mm, used, comes with a Direct Clutch solid centre 5 puck ceramic clutch plate. $190. RB26 cams used, excellent condition. $190. HDI GT2 intercooler, excellent condition, has 3 inch piping welded to inlet and outlet. $190. All items located in South Eastern Melbourne. Please PM me if interested.
    • The easiest option might be to just spray a bunch of fish oil in there.  At least that way you can feel like you've done something while you continue to ignore it
    • I'm firmly on the "zero compliance is good compliance" for FUCAs. I'd be looking to solid metal joints even if the primary reason for having them is because they facilitate the twist in the arm. I have never been more happy with the way the front suspension behaves than I have since I got rid of the FUCA bushes. Even the thin little (short lived) poly bushes in the Whiteline adjustables have too much compliance for my liking. It probably won't be long before I have sphericals nearly everywhere, probably including both top and bottom arms in the rear, and I'll start complaining about the increased costs for dental work. But I will be enjoying the driving more, I'm sure.
    • Plus, you'll get great experience in bedding in pads!
    • I have offset Nismo brackets so the fact the gktechs can pivot is less important to me. I have 170mm JIC arms with bushings - but they provide no adjustment and I'm not sure whiteline eccentric bushings will fit them (I don't want to ruin the bushings currently in them to find out). Ideally I want something with bushings + adjustment; hence why I'd like to find a pair of these. Unfortunately they aren't easy to find.
×
×
  • Create New...