Jump to content
SAU Community

Recommended Posts

Hey guys, long story short, had my car dynoed when it was stock and it made 213rwhp and after a few mods i thought i would see what it is making, mods are 3" exhaust turbo back with screamer, FMIC, Pod, Splitfire coils, CAI, 040 pump and thats about it. Still running stock boost and it made 205rwhp? the thing is its not loosing boost, afr seem to be ok just richens up top (around 11's) the workshop told me possibly the clutch is slipping? doesnt feel like it to me as i can hold 2nd and 3rd gear slides, charts are attached. Any help would be appreciated.

Thanks

Brad

post-7636-1176605198.jpg

post-7636-1176605487.jpg

Link to comment
https://www.sau.com.au/forums/topic/164599-problem-with-r34-gt-t/
Share on other sites

So once the pfc it was tuned it was fine? i have found a couple of pfc's for sale at reasonable prices but spoke to Dr drift today and a remap sounds a bit cheaper and possibly a better tune?

So once the pfc it was tuned it was fine? i have found a couple of pfc's for sale at reasonable prices but spoke to Dr drift today and a remap sounds a bit cheaper and possibly a better tune?

hey mate sorry to hijack your thread but i was wondering how much are u being quoted to remap the ecu?

cheers

ah, you actually can not remap the ecu at all whatsoever...

if you know someone that does i think alot of ppl here in SAU including most of the experts would want to know how its done...

get ultimate or pfc as your cheapest and best ecus, otherwise get haltech, motech, wolf etc etc etc.

Fuel cut defender and an SAFC2 will do it too yeah?

ah, you actually can remap the ecu but as stated above it's not worth the effort or money, much better to go with an r32 item and a rev switch to control the vct..

ah, you actually can not remap the ecu at all whatsoever...

if you know someone that does i think alot of ppl here in SAU including most of the experts would want to know how its done...

get ultimate or pfc as your cheapest and best ecus, otherwise get haltech, motech, wolf etc etc etc.

Fuel cut defender and an SAFC2 will do it too yeah?

ah, you actually can not remap the ecu at all whatsoever...

completely wrong.

www.drdrift.com

"One of our rather unique talents is in the reprogramming of factory engine management in many cars. The factory Nissan ECU's have a huge potential whilst still maintaining all the factory features of economy, drivability, cold starts, and idle control."

many types of Nissan's can be remapped.

I'm trying to decide between remap and pfc

Brad: what sort of reasonable prices are you find for the r34 pfc's?

ah, you actually can remap the ecu but as stated above it's not worth the effort or money, much better to go with an r32 item and a rev switch to control the vct..

Thats what i thought...

my guess is the rubber hosing on the intercooler piping.. sometimes the suck closed under pressure.. sounds crazy but it happens.

No its not that, new ARC cooler and hoses are all new, plus the boost doesnt drop excesive

I'm trying to decide between remap and pfc

Brad: what sort of reasonable prices are you find for the r34 pfc's?

Around $1000 :sorcerer:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also, a tip for young players  Check the dates on new tyres before they fit them, I always ask this question at the tyre shop, as they have tried to put "new" tyres on one of my cars a few years ago, but the build date was about 3 years old
    • Yeah - 4 or 5 years is the limit for decent tyres. Pedestrian grade tyres with 400 TW ratings start out hard and don't start to suffer until they are somewhat older again. But the stickier decent stuff? Nup. My current ADO9s are < 2 yrs old, 17000km in, only have about the minimum 2mm of tread depth left, and they are.....not what they used to be. They are clearly much harder now than when new. Whether that is heat cycles (unlikely, for a road tyre), different compound between top and bottom of tread, or actually aging out (in less than 2 years!!!) is not really able to be discerned. But I'd credit actual aging as being at least part of the cause. I've got an old pair of ~50% worn AD08Rs in the shed that I really need to get rid of. They started feeling waaaay too hard to put back on the car after a couple of years sitting there.
    • Personally I wouldn't put tyres over 4 or 5 years old on any of my own cars. Once they go hard the grip characteristics completely change. As per most things it only matters in an accident and that's when you most want them to do their job!
    • I'm replacing the front tyres on the E39 tomorrow because one of them has a few gouges out of it. There is so much tread still on them but they're also 9 years old and the rubber is super hard.  This falls within the guidelines of 10 years old that I've read which surprises me given their condition.  I'm curious about whether you guys care about tyre age or just judge the tyre based on condition? How old would you consider too old?
    • What starts as a scratch, becomes a flesh wound, then quadruple amputation. Jus' sayin'. Crush resistant gloves (The ones with the rubber strips down the back of the hand and fingers) might not be a bad idea after all!
×
×
  • Create New...