Need Tranny Help R32 Gtr

[felixy69]

hi guys

i got a 6 spd Grex gear set build into a 1993 bnr32 Gear box, the last owner did it.

i have a 1990 BNR32, with the old style Clutch

i notice my speed sensor, my fork, and i think my clutch won't fit too

my main concern is my clutch

what can i do to make the clutch fit ?

which speed sensor do i need (does anyone have part number??)

Old version is push type rigth ? or pull type?

thx

[Risking]

the box you have is pull type the vehcile is a push type.

You can change the pivot setup and run the push type without any hassel.

Try using the original speedo drive. im fairly sure it will work fine with that gear set

[felixy69]

the new gear drive is skinnier and longer and is RED

the OLD gear drive is fatter and shorter and if i remember right, it is in BLUE

too bad i lost all those pictures other wise i would post it up.

This is a picture of the new tranny

this is a picture of the OLD one

i will take a picture of the inside of the new tranny tomorrow

the only major differ i remember is the old tranny, it privit on a ball join thing

and the new one looks like it is connected with a bolt, which means it privit on a bolt.

[T04GTR]

that means its a gts-4 box blue=4.375:1 red is 4.11:1. or its had the drive changed or yoyve got gts-4 diffs and someone did the right tjhing and change it for you

if its a gtr you should have a red one.

[felixy69]

that means its a gts-4 box blue=4.375:1 red is 4.11:1. or its had the drive changed or yoyve got gts-4 diffs and someone did the right tjhing and change it for you

if its a gtr you should have a red one.

i am guessing a GTRdiff is better then a Gts-4 one ?

should i change the diff back to a GTR diff ?