Jump to content
SAU Community

Recommended Posts

Hi everyone, I'm fitting a GTR bonnet to my R34 GT-X skyline, i have a pair of conversion hinges and top mole (nose) on order.

Can anyone tell me what needs to be done to the cars lock mechanism so that i can retain the catch on my new bonnet?

If you have done this your help will be greatly appreciated.

Thanks.

post-26384-1176637722.jpg

post-26384-1176637767.jpg

Well you could try buying the GTR latch from nissan. About $80 brand new.

Not sure if it would solve your problem , you might also need to the upright part the latch bolts onto as well.

Is that all it would cost, i assumed it would cost an arm and a leg, had been trying to find a GTR that was wrecking.

Thanks, will call them tomorrow.

Hi everyone, I'm fitting a GTR bonnet to my R34 GT-X skyline, i have a pair of conversion hinges and top mole (nose) on order.

Can anyone tell me what needs to be done to the cars lock mechanism so that i can retain the catch on my new bonnet?

If you have done this your help will be greatly appreciated.

Thanks.

You will need both GTR latch and latch support if you are using a genuine GTR bonnet.

what front bar you going to use?

I'm using the factory fitted front bar (as shown in first post) but you can also use the Nissan Aero front bar as you can buy a front mole for that bar aswell.

The ultimate front bar for this setup is the East Bear GTR version as it fits non GTR's without changing front gaurds. (shown below).

post-26384-1177150414.gif

I was bidding on the same bonnet you bought, but with frieght to Brissy it became too much

Yeah, could'nt believe my luck when i won the auction, i was'nt actually looking for a GTR bonnet but as a new one would have cost three times that amount

retail it was a bargain especially as it was brand new and had never been fitted and pickup was only 20 mins away.

wow, i should have really looked into the price before i got mine modified...

where did you say divide by 3 before? i can't find it... and i have no idea what the average market price for a bonnet is...

wow, i should have really looked into the price before i got mine modified...

where did you say divide by 3 before? i can't find it... and i have no idea what the average market price for a bonnet is...

Average price for a R34 GTR carbon bonnet approx $900-1200

This new one sold for less than $470 on ebay. Was old stock and shop wanted to get rid of it.

It was going to cost me approx $150 freight plus the chance of it getting damaged, so I did not bid too high on it

Plus I already have a genuine alloy 34GTR bonnet on my Stagea

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for that.... If only I could do something once and be happy with that, like some people do....
    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
×
×
  • Create New...