Jump to content
SAU Community

Wolf V500 On R33 Gts-t


-33-
 Share

Recommended Posts

Wolf really runs away from PFC when you get hardcore as it can drive 0.5ohm injectors without resitors,control NOS,

Boost is very well controlled with temp.TPS,rev etc comps.Fuel and or ign rev limiter with hard and soft cut.dozens of inputs/outputs and dual maps.Can control Auto trans etc as outputs are 3D Mapped.They really are a very powerfull unit and can be adapted to run anything you want inc odd throttlebodys with different TPS etc and Idle locks for huge cams.

One downside is basic tuners would rather bag them as crap than admit they cant use a highend ECU,Fuel / Ign is simple but advanced functions are for premium tuners so dont use anyone not on the Wolf recommended tuner list.

Datalogger is cool also.

http://www.wolfems.com/component/option,co...mid,60/cat_id,2

Link to comment
Share on other sites

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Wolf really runs away from PFC when you get hardcore as it can drive 0.5ohm injectors without resitors,control NOS,

Boost is very well controlled with temp.TPS,rev etc comps.Fuel and or ign rev limiter with hard and soft cut.dozens of inputs/outputs and dual maps.Can control Auto trans etc as outputs are 3D Mapped.They really are a very powerfull unit and can be adapted to run anything you want inc odd throttlebodys with different TPS etc and Idle locks for huge cams.

One downside is basic tuners would rather bag them as crap than admit they cant use a highend ECU,Fuel / Ign is simple but advanced functions are for premium tuners so dont use anyone not on the Wolf recommended tuner list.

Datalogger is cool also.

http://www.wolfems.com/component/option,co...mid,60/cat_id,2

This is the defining post of the thread!

Link to comment
Share on other sites

One downside is basic tuners would rather bag them as crap than admit they cant use a highend ECU,Fuel / Ign is simple but advanced functions are for premium tuners so dont use anyone not on the Wolf recommended tuner list.

Datalogger is cool also.

http://www.wolfems.com/component/option,co...mid,60/cat_id,2

Key point there indeed, plenty of amateur andy's around. Even the recommended list has dud's in it.

Link to comment
Share on other sites

Ive done 34s by splicing into the factory harness below the plug so the factory ECU can be refitted later if needed.V500 will run all the stock sensors/ VVT/Aircon Idle control etc but if you go this way tell your Wolf dealer your using the factory CAS so you can run it unchanged,If not you will need to change the disc.

Any Dud tuners will be found out fast enough so talk to them(Same for any ECU)see if they know what they are talking about.

Link to comment
Share on other sites

  • 2 weeks later...

My tuner has asked me to get a hold of a wolf 3d or wolf v500 for my r32 GTR. Can anyone advise what model number i need to ensure that i get one which is compatible with the 32 gtr (the right loom/software etc).

I've had people tell me that they are universal and that you just need to buy the right loom, but i've had others tell me that you need to buy a specific unit.

Can someone please clarify what i would actually need?

(an aftermarker comp is needed cos i'm running two garrett 2560r turbos, 3.5 inch full exhaust, and pod)

Any help would be much appreciated. :thumbsup:

Link to comment
Share on other sites

Order the GTR plug and play as it is not universal,GTR works on GTS (ETC) but 4WD will not work if you use GTS on a GTR.www.wolfems.com.au

Remove the injector resistor with the wolf as it can drive 1/2 ohm injectors and the resistor is a low performance part,you get much better control and a bit more power before 100% duty(resistor slows injector responce).RB20 guys buy the resistor when using GTR etc injectors with remaps or PFC's.

Link to comment
Share on other sites

Order the GTR plug and play as it is not universal,GTR works on GTS (ETC) but 4WD will not work if you use GTS on a GTR.www.wolfems.com.au

Remove the injector resistor with the wolf as it can drive 1/2 ohm injectors and the resistor is a low performance part,you get much better control and a bit more power before 100% duty(resistor slows injector responce).RB20 guys buy the resistor when using GTR etc injectors with remaps or PFC's.

Thanks for that... not sure that i completely understand that though (i'm very new to this aftermarket computer stuff)

Are you saying that even if i buy the plug and play for the GTR that the 4WD won't work? Or are you saying that if i buy the universal I will not be able to get the 4WD to work?

Link to comment
Share on other sites

Thanks for that... not sure that i completely understand that though (i'm very new to this aftermarket computer stuff)

Are you saying that even if i buy the plug and play for the GTR that the 4WD won't work? Or are you saying that if i buy the universal I will not be able to get the 4WD to work?

He is saying make sure you order the GTR ecu.

If you order the universal ecu, the Wolf V500 will not run the 4wd system.

Even though all the V500's look the same externally, the software for the "plug n' plays" is changed, to control that car's particular features.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • to have this type of adjustment possible with a curve as I wish, what budget (engine) should be planned?  
    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
×
×
  • Create New...