Jump to content
SAU Community

Recommended Posts

i have a R34 GTT is around 210rwkw run 7psi day to day. recently noticed that the clutch slips usualy wen fullbost hits 3,500+ rpm. some times this happens and some days it feels ok. Is there anather driveline component ie. clutch slave, fork, of something else that could be causign this???

Link to comment
https://www.sau.com.au/forums/topic/164770-clutch-problem/
Share on other sites

i have a R34 GTT is around 210rwkw run 7psi day to day. recently noticed that the clutch slips usualy wen fullbost hits 3,500+ rpm. some times this happens and some days it feels ok. Is there anather driveline component ie. clutch slave, fork, of something else that could be causign this???

my clutch used to slip within that rev range as well. especially when u give it spirited throttle. it was ok if i let the revs climb slowly. i blieve its ur clutch thats giving way.

do you smell any burning smell after a long drive? the smell may indicate a scorching flywheel from the slipping....

just my two cents!

Link to comment
https://www.sau.com.au/forums/topic/164770-clutch-problem/#findComment-3053230
Share on other sites

my clutch used to slip within that rev range as well. especially when u give it spirited throttle. it was ok if i let the revs climb slowly. i blieve its ur clutch thats giving way.

do you smell any burning smell after a long drive? the smell may indicate a scorching flywheel from the slipping....

just my two cents!

yer sounds right when i ease the throttle on its ok, but if i flit it to 14psi and punch it she goes no were, but on 6psi she ok just slips sumtimes on hi revs.

Link to comment
https://www.sau.com.au/forums/topic/164770-clutch-problem/#findComment-3053554
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
    • I ordered a GSP Front R/H Axle from here - https://justjap.com/products/gsp-premium-front-driveshaft-r-h-nissan-r32-r33-r34-skyline-gtr-stagea-4wd#description It lasted around a year before one of the boots blew out. I'm lowered, but I have GKTech roll center adjusters. One year seems a little premature. I think I'm going to spend the extra money on an OEM cv axle this time. This website - https://tfaspeed.com/collections/nissan-stagea-wgnc34-x-four-parts/products/nissan-stagea-awc34-260rs-rb26-right-front-axle-drive-assembly Makes it sound like the readily available OEM CV axle will only fit 11.1999 Stagea and up (mine is a 2.1997 S1). The JustJap listing didn't mention any years or anything for the GSP axle. Amayama shows '11.1999' and up as well for that part number. As well as 'plastic boot type'. See attached picture. So I guess my question is, does that axle (39100-23U60) really only fit S2 Stagea? It's the front driver side. If it does, I'd love to buy that instead of rolling the dice on another GSP. I've found that OEM one cheaper here: https://www.partsfornissans.com/oem-parts/nismo-jdm-r32-r33-r34-skyline-gtr-r32-gts4-right-front-axle-3910023u60 and here https://www.nissanparts.cc/oem-parts/nismo-shaft-ft-drive-3910023u60 Just a little confused because the JapSpeed listing for the GSP front driver axle doesn't mention any specific years or anything and it fit my S1 Stagea fine. So will 39100-23U60 fit my S1 Stagea even though technically it says '11.1999' and up? What would have changed? Thanks.  
    • Thanks for the info. The only "Issue" I've had with the shifter is I always found the throw between 4th and 6th gear too close. I'm always worried to shift into 4th accidently and sending my motor to the moon. Adam LZ recently came out with a video and stated Serialnine revised their shifters to correct this and will change all the revised parts for 150$. Strangely enough, I contacted Serialnine right after and they denied it and said it's bullshit. I found that strange as he's a distributer. I'll keep this forum post updated on that saga.
    • Yep that is correct. It allows you to adjust the short throw range from what I can tell
×
×
  • Create New...